[Zestaw] Replika karabinu maszynowego FN MK46 MOD 0 SOCOM [A&K] + Elektryczny magazynek pudełkowy 1500 kulek do SAW - Woodland

Kupiłem 3 magazynki do mojego MK46. Od samego początku baterie były bardzo słabe, a po zaledwie dwóch grach wszystkie trzy magazynki przestały działać. Jakość wykonania jest tragiczna. Jestem bardzo zawiedziony tym zakupem. Mam nadzieję, że uda mi się znaleźć kogoś, kto będzie w stanie je naprawić. Zdecydowanie nie polecam.

Magazynek elektryczny Battleaxe to jak mieć pomocnika, który szepcze: „Nie martw się, załaduję za Ciebie”. Szybki, sprytny i niezawodny – praktycznie jedyny magazynek, który pracuje ciężej od Ciebie w środku akcji. Nie dość, że wygląda solidnie, to jeszcze daje wrażenie, jakby miał własne IQ. W skrócie: raz go użyjesz, a zwykłe magazynki poczują się jak Nokia 3310 w erze smartfonów. Duża pojemność, szybkie podawanie kulek, solidna konstrukcja z wytrzymałych materiałów. Polecam!

Kupiłem replikę aby wymienić moje już podgryzione przez oś czasu RPK od Cymy, i się nie zawiodłem :)

+ PLUSY
Replika ma dobry zasięg z pudełka i ma około 450 fps (sprężyna M130).
Co do wykonania zewnętrznego nie mam się do czego przyczepić oprócz tego że trzeba dać niektórym częściom ruchomym się wyrobić ponieważ replika jest bardzo sztywna ( poza osadzeniem kolby ale to dość normalne nawet w karabinach AR)
Co do wnętrza nie otwierałem i jak narazie nie mam zamiaru otwierać repliki przez gwarancję ale myślę że posłuży przez długi okres czasu.
Z plusów też można dodać szybką wymianę sprężyny oraz miejsce w środku chwytu pistoletowego (polecam trzymać tam zapasowe baterie do boxa)

- MINUSY :
Z minusów w środku napewno hop up który jest znany w M249 w airsofcie z tego że działa bardzo słabo. Ale patrząc na to że to jedyny minus samego karabinu jaki zauważyłem to karabin jak na razie jest bez skazy.
Jeśli chodzi o magazynek pudełkowy to inna para kaloszy. Magazynek dołączony w zestawie jest dobry i podaje, lecz tryb sound Control z moich odczuć działa za słabo ponieważ momentami strzelałem na pusto. Jest to też zmora karabinów wsparcia i często ludzie mówią że jedyne awarie jakie mieli to z samym magazynkiem i to się sprawdza za co odejmuje mu jedną gwiazdkę.

Z moich poleceń które nie są wymagane :
Polecam wymienić komorę hop up na np od bullgear,
A w sprawie magazynków dla osób z większym zasobem gotówki kupić magazynek od bullgear który automatycznie podkręca kulki po naciśnięciu spustu lub zrobić to jak ja i kupić włącznik żelowy (taki jak do latarek) z odpowiednim wejściem do boxa aby podkręcał kulki po jego naciśnięciu. Problem załatwia to w okolicy 30 zł więc małe pieniądze a jest to duże udogodnienie.

Podsumowując za cenę ponad 2000 zł dostajemy karabin z stalowym body oraz dużą mocą od razu z pudełka, myślę że każdy gracz wsparcia powinien przynajmniej pomyśleć o tej wersji ze względu na wagę i mobilność samej platformy ( z moich odczuć biega się z tym jak z trochę szerszym M4)

Świetnie odwzorowana replika, Części wewnętrznej jak i zewnętrzne wykonane świetnie. Zasieg i skupinie powala na łopatki jak na replikę prosto z pudełka wyjętą, nic tylko wsywypac kompozyt i siać w stronę przeciwników!!!

2.2 jouls with M130 spring.
It sounds better with a 7.4 volt battery but does much higher RPS with 11.1
Overall it is a good deal especially for the price I got it which was 440€.
Quite heavy but it doesn't bother me

A machine gun like no ther, almost all of the replica is made of solid metal and steel making it close to the weight of the real one,Very consistent shots and nicce accuracy ,Very strong motor and gearbox perfect for long games and very easy to insert battery . probably the best Airsoft replica I ever held in my hands

Mag feeds like a charm bought it on sale kinda feel bad about not getting another one but in the future im definitely getting 2 it shots out more than 2000 rounds no problem not one misfire or jam very satsfied with it.

I'm very happy with this M249 SAW box mag, I personally own A&K M249 MK1 and this box mag works flawlessly. Big plus is rechargeable battery that comes with the produkt
Overall, very good piece of kit for a machine gunner role.
⭐⭐⭐⭐⭐

This replica is a solid choice for anyone wanting to get into the support role.

It's well built, having all of the key components made from metal. There isn't any wobble or rattle, and the few re-enforced polymer parts are very durable.

There is much more space for the battery compared to the polymer counterpart, allowing you to use longer stick batteries.

Using a 7.4V Titan, I am able to hit roughly 12-15 rnd/sec. This is fine for me as I am not looking to empty my box mag in the first game :)

The sling points have held up fine. Easily holding the replica weight, a full box mag and the stress of me running around in a skirmish.

The stock has 5 points of adjustment making it easy to shoulder for different framed people. Its sturdy and easy to change positions for use/storage.

The handguards are all metal and the rails are accessable despite looking very cramped in the images here. The lower handguard installs and removes smoothly, and stays in place during play.

The box mag fed flawlessly and fit perfectly. After ~6000 rnds, I've had no issues :)

I regrettably had knocked off a star as the stock hop unit struggled to hop 0.25g BB's. Anything above that weight and it cannot hop at all. I tried changing the nub and bucking, but it didn't have any effect. It seems the rotary dial does not put enough pressure on the nub even when fully on.

The barrel was very "dirty" on arrival. It's hard to explain, but there looked to be streaks of oil and/or slight corrosion. After trying to clean the barrel with Iso-propyl alcohol and letting it dry, the streaky corrosion markings remained. I'm not sure if this affects the flight path of the BB's at all, but I was still dissapointed to see it.

To combat the hop issue, I had to purchase an aftermarket hop unit. I was not interested in modifying the stock hop chamber or trying to "shim" the nub.

Overall, I am very happy with the replica. It's heavy, so not for the faint of heart, but seems like it can take a beating. The ROF is perfect for how I want to play and I was happy to see that I could use longer batteries in the handguard. I've had no problems with the included box mag and haven't experienced any feeding issues at all.

If you like the platform and are ok with the weight, this is a great replica for a starting or seasoned support player.

The replica arrived few days after purchase, it was packaged in a Cybergun branded box, which contained the replica, magazine and a spare spring.
Externally the replica is Very well made, this version (atleast mine) has better fitment of the external parts, than standart A&K replica's have, everything is rock solid without any wobble, except for the stock, which wobbles on the buffer tube (that is a common problem and can be easily solved), also the making on the reciever is beautiful.
Performance of the replica with the strong spring wasnt as good, rate of fire was slow, after changing to the weaker spring (approx.M120 by weight) the gun started cycling nicely with solid rate of fire (measured at 16-18bb/s), the gun was chronoing at 1.6J (125m/s), which is perfectly for usual limits in some countries, the gun can hop maximum BB weight of about 0.3g and send them accurately to measured 50-55 meters, which is solid for a stock replica.

Internally the gun has kinda proprietary Hop-up chamber to standart M249's, since it has different anti-rotational pin placement and different feed Block than the old A&K's. The hop-up chamber is far better than the old A&K design, because it already has concave nub design and with a Begadi/MapleLeaf bucking and a little know-how it can lift 0.32g's perfectly with great range.

The gearbox internals are great compared to standart old A&K's, since the gun has a CNC steel cut gears (SHS OEM), Nylon body piston with full metal Teeth rack, Steel cylinder and aluminium Piston head+ cylinder head.
Only complaints about the gearbox internals are, that the cylinder head fitment isnt the tightest and the o-ring nozzle isnt sealing too well out of the box.
The motor is fairly standart (probably about 26-28tpa motor) with thin neodymium magnets, it has enough power for springs up to 1.7J of power, with the stronger spring in the box (2J of power) its not operating as well.

Conclusion:
This replica is perfect replica out of the box for someone who wants to play LMG role ať field with up to 1.7J limits, or a nice base gun for an upgrade, since it already has some parts that you will use in your upgrade.

It has some small flaws, that could be fixed, but almost none stock gun is perfect, so i give the gun 4/5 stars, since there is a small room for improvement.

!!! I Would personally 100% recommend to buy this gun if you want a LMG, more than the standart A&K variant!!.

Good mags. It looks pretty nice. No experience with how it feeds, but should work without any problem. The magazine will be used for a custom project, so will not test the internal feed mechanism. But it does fit my A&K m249 fine.