Celownik optyczny 4×26 do Kar98k [S&T]

Luneta do Kar98k od S&T to must-have dla klimatu. Ma świetny retro wygląd, ale wąskie pole widzenia i mały eye relief wymagają przyzwyczajenia............


Polecam czuje sie jak major König oblegajacy stalingrad zimą

Bardzo dobra jakościowo optyka, a przy tym całkiem udana replika ZF39. Wbrew jednak temu, co jest w opisie replika nie jest tylko ze stali i aluminium. Montaż, wraz szyną montażową to głównie elementy znalowo-stalowe. Nie mniej to co jest ze znalu jest wykonane najwyższej jakości. Elementy są świetnie wykonane, to co jest ze stali mamy oksydowane, a to co ze znalu- czernione na zimno (nic tu nie jest malowane). Optyka czysta, pokrętło regulacji działa płynnie. Montaż ma lekkie luzy na szynie montażowej, ale można to wyregulować poprzez odkręcenie śruby dźwigienki zaciskowej i przestawienie jej o kilka ząbków na wielowypuście (dokładnie tak jak w oryginale). Ogólnie produkt wart zakupu.

Bardzo fajna, jasna optyka. Świetnie prezentuje się na Kar89. Dość trudne ustawianie w poziomie, no ale to już kwestia historyczna. Problem: celownik ma montaż boczny do szyny przykręcanej do komory zamka. W moim wypadku montaż założony na tą szynę i stabilizowany dźwigienką ma luzy i niekiedy troche się rusza. Wymaga kombinowania z dodawaniem podkładek i usztywnianiem, ale można sobie z tym poradzić

This my review after two years of use on my S&T Kar98k.

Short Review:
===========
+looks god damn nice
+can use both the scope and iron sights
+pretty close to the real deal
+comes with a rail for reddots or other scopes
=hard to adjust/zero but it works
=overengineered which is very german authentic :D
=you can take down the scope easy, but you will lose zero
=fits S&T Kar98k Model 2 only
=the rail and mouting plate should be a seperate option to buy too
=may need scope caps to cover the lense from dust
-you need to remove the scope in order to adjust the hopup
-a bit harder to load the next shot because the scope is in the way
-may have few quality control issues but it is fine

Score 8/10


Long Review:
===========
Unboxing:
-----------------
-You will get two boxes, first is the scope, manual and the mount with the picatinny rail adapter.
-The scope is based on an earlier ZF39, there are lots of models but ultimately they are similar having X4 zoom (which this is), the scope itself has 26.4mm thickness.
-The mount is also based on a very early model, this allows you to connect and disconnect your scope whenever you need it. If you want to add a more modern scope (say 25mm thickness) you may need to either add tape or 3d print some "sleeves" so that it sits on the mount.
-The rail is for using either a reddot, a modern scope or.. anything like a grenade launcher, use your imagination.

Mounting:
-----------------
(short instruction since you will have to mount them together)
-You will need a screwdriver bit set since it comes (or it came for me) with no tools, a bubble level, also a stable straight place or a tripod (optional).
-First you need to remove the small plate on the left side of the bolt, it should have 3 big screws. When done you need to screw the mount plate in the place with the same screws, it should go fairly easy.
-Second find a way/place in which you can sit the rifle on a straight position, use the bubble level on the mount plate itself, when done you can mount the ring mount on the mounting plate, make sure the lever is on the direction of the buttstock before you put it on the plate, when done flip the lever on the direction of the barrel to secure it inplace.
-Third find a thick screwdriver bit that can unscrew the screws from the rings (if it is too thin you may damage them..), place the scope in a way the range wheel (the round thing on top of the scope) is between the rings.
-Fourth use the bubble level again til it is straight (or when the reticle is straight).
Congratulation you managed to mount the scope.

Zeroing/Adjustment:
-----------------
-If you intend to use this as a primary sniper DO NOT remove the scope from the lever side, but rather from the 3 screws side. You will lose all the Zeroing and adjustment if you remove from the lever and you will have do it again.
-For Zeroing UP-DOWN, the top wheel of the Scope is for how high or low your aim is, the numbers are intented for the real rifle not airsoft, but with trial and error you can reach the desire spot, simply losen the screw and rotate the wheel Clockwise for DOWN, and Counter-Clockwise for UP, when done screw it back to hold it in place.
-For Zeroing LEFT-RIGHT, you have two screws on the rear side of the mount, to aim LEFT you will have to losen the left screw and tighten the right screw, for RIGHT losen the right screw and tighten the left screw, you many need a wrench to do it.
(Please DO NOT overtighten the left and right screws since it can eat the treads of the mount, use locktight in order to keep it inplace when you have finished Zeroing.)

The Good:
-----------------
-Looks very beautiful, Sexy and close to the real deal, since there are lots of models of this it is hard to pinpoint the exact model, but it is close to original ZF39.
-The rail is a nice edition for adding other optics, while it is a bit on the left side it is no issue for Zeroing.
-You can use both the scope and iron sights with no problem, also very comfortable to use it with good eye relief.

The Normal:
-----------------
-It doesn't have many markings, only markings I see are on the scope with "JENA" logo, "Zielvier" and a serial number, while not authentic like the original having the zoom specification and different logo, still a nice touch.
-No Matching parts number like any tipical german weapon/mod, it is ok..
-While it is hard to adjust (especially when it came to LEFT-RIGHT, my fingers hurt), it is ironically very German Authentic thing :D overengineered for a very simple task, kind of like the early ww2 german semi auto rifles.
-Only fits the S&T Kar98k Model 2, please double check your gun before buying it.

The Bad:
-----------------
-It may wobble a little if hit or not properly secured inplace, you can use tape, rubber, or even glue to make it harder to move on the mounting plate. Another option (if you can and are skilled) is to drill holes through the mount on where the screw holes for the rail are located, you may need longer screws for it to secure it in place, that way you can be sure it will never lose zero when hit.
-Wish the rail and the mounting plate were as a seperated purchase option.
-My scope has a dot on the left side of the reticle, not that bad or distracting, I will call it my emotional support Hans the Dot.
-When loading, you may hit the scope with your palm when not careful, you will have to either hold about half of the bolt knob when loading, or just lift half way instead of all the way up, the rifle works either way, only the firing pin will not reset (is just cosmetic anyway).

===========
Final Thoughts
===========
It is a nice replica, while not top tier scope it does its job, defently not great for a new airsoft player or someone that doesn't know how to work with it (been there don't worry) but for gun collectors that love to have ww2 stuff may be a must.

Final Score 8/10, needs better quality control, tools and some parts needs to be sold separate as well.

A szállítás és csomagolás rendben volt. A fegyver szép kidolgozott. Akár dísztárgy is lehetne. A hozzávaló scope passzol és jó minőségű. Még csak otthon próbáltam, játékra nem tudtam bevinni, így a használatról nem tudok írni, a próba lövések rendben
mentek. A betárazás amúgy egy élmény. Aki szereti WW2 replikákat nem csalódik.

The quality on this one is realy amazing, I like how they realy managed to keep the original look from the real thing, one downside is that the closing lever from the scope mount can fall off and you wouldn't even notice it, at least that happened to me
8,5/10

Amazing quality and very good optics. It is a must have for your kar98 in my opinion. Only 3 screws needed to fit on the rifle. No other modifications needed to fit. Very authentic too. Sadly you need to upgrade your rifle for it to be useful. Both spring and pretty much all internals (except hop-up chamber and cylinder) need to be replaced.

A very good replica of the standard ZF 39 scope, a later version with a side mount. Perfect work, perfect craftsmanship. I recommend the item KAR 98K from the same manufacturer.
The only design different from the variant with mounting stones on the the rear fixed part of the weapon's breech.
I strongly recommend it to all reenactors and WW II fans.

Very nice scope
I’ve bought it because on my Kar 98 is perfect
Nice zoom and millimetres regulation
So if you want to be Wehrmacht or XX sniper buy it and mount on your Kar 98 snow wolf because it’s possible

Kötelező darab a Kar98-hoz! Kiváló minőségű. hnagyon szépen elkésztett másolat. Igazi élmény vele a lövészet. König őrnagynak érezheti magát az ember Sztálingrádban. :D Felszerelés előtt érdemes a mozgó részeknél átolajozni. Meghálálja. Kár, hogy csak 5 csillagot lehet adni rá, ez simán 6. :)