+48 123626134 [email protected]
Promocja
Vector Optics  RDSL18 | Dostępny
Nasza cena*: $32.52

Cena bezpośrednio przed obniżką: $43.36

  • Formy dostawy

    Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy

  • Dane techniczne

    Producent: Vector Optics
    Kod: RDSL18
    EAN 6976386124064
    Waga 70 g
    Kolor czarny
    Materiał aluminium 6061T6
    Optyka szklana
    Długość mm 46
    Wysokość mm 37
  • Recenzje

    • - 03.05.2023 napisał:
      W skrócie- brać jeśli nie szukacie czegoś na risa.
      Przejrzyste, spore koli. Trochę za małe jak dla mnie na jakiegoś pma, ale na klamkę jak najbardziej (ja mam właśnie tak).
      5 poziomów podświetlenia- dwa ostatnie są piekielnie jasne, kłują w oczy wg mnie przydadzą się w trakcie super słonecznych rozgrywek.
      Solidne wykonanie, praktycznie wyzerowany już z pudełka, w zestawie pokrętło, klucz, ściereczka i osłonka (przydatna w transporcie).
      Szkoda że vector nie produkuje żadnych osłonek do koli bo trochę się boje :(
      NIE PASUJE na płytkę do Sand Vipera od AA- konieczna wymiana śrubek montażowych na inne

      Trochę się nie mogę doczekać aż wrzucę na ostrą i sprawdzę jak działa.
      Ocena opinii: 0
    • - 25.08.2026 napisał:
      Brightness and size were great, the parallax not so much. Also the battery has a tendency to get loose when the scope is used on a GBB. Also the lens can be easily scratched even then the screws that come with the reticle.
      Ocena opinii: 0
    • - 12.08.2026 napisał:
      Got two because at the time this was the cheapest red dot that would fit the mounting plates on two pistols and they exceeded my expectations. The glass is clearer than my JJ and TE pistol red dots both of which are more expensive than this one. Also on this one the dimmest setting is dimmer and the brightest setting is brighter. Both fit perfectly on the pistol plates I had. Haven't tried the 11mm mount so can't comment there. One has about 50 rounds and the other one over 200 on green gas blowback slides and no problem so far. The only thing not great is that instead of + and - buttons there is just one but that is just a minor inconvenience - you can turn it off at your preferred brightness with a long press and then it turns on back on that brightness so it is not that bad. The protective cap is rubber so if you have a rear sight behind, it is easy to cut a notch in the cap to fit. The linked products on this page also show the mounting plate geometry so you can double check if it is for your pistol or not - good job on TG for providing that.
      Ocena opinii: 0
    • - 07.05.2026 napisał:
      Finding a high-quality red dot sight for a 11mm dovetail rail is often a frustrating task for airgun and rimfire enthusiasts. Most premium optics are designed exclusively for Picatinny systems, leaving those with classic dovetail mounts to rely on cheap, flimsy adapters or low-tier sights. However, the VictOptics V3 1x22 is a true diamond in the rough. It is one of the very few dedicated dovetail red dots that actually delivers professional-grade performance without the need for bulky converters.

      The build quality is surprisingly robust, featuring a crisp 3 MOA dot with multiple brightness settings that remain visible even in bright daylight. The 22mm lens provides a clear, wide field of view, and the elevation and windage adjustments are tactile and precise. What sets this apart is how securely it locks onto the 11mm rail; there is zero wobble, and it holds zero perfectly even after repeated use. If you are tired of compromising with subpar optics just because of your rail type, this is the solution. It offers a sleek, low-profile design and reliable electronics, making it easily the best dovetail-ready red dot currently on the market.
      Ocena opinii: 0
    • - 10.04.2025 napisał:
      Great red dot mounted on my JAG Arms Sand Viper replica. Attention! It is sold in a kit with the R615-1 TTI sand viper pistol but the screws do not match! Luckily I found a couple at my hardware store and mounted them. For the rest, great sight complete with cover in case of non-use
      Ocena opinii: 2
    • - 29.02.2024 napisał:
      I bought this reddot for my GBB pistol, an Army Armament R501 with custom mounting plate.
      It is absolutely amazing, the lens is clear and the red dot is bright, perfectly usable even in daylight.

      I also have a picattiny mount for it, it looks pretty sick on my M4.

      The optic is very high quality made and sturdy, easy to use, with almost no parallax.

      I can really recommend this reddot sight, TaiwanGun even sells mounts for it, it is a perfect sight to use over a scope, at 45°angle or even as a main optic.

      The sight itself without a mount is only 28g heavy, it is very light.

      If I'll need another compact sight I will definitely buy another one.
      Ocena opinii: 4
    Dodaj opinię
  • Zapytaj o produkt

    Administratorem Państwa danych osobowych jest \Krakman P.Kiepura, K.Michalik Sp. k. a z siedzibą w Krakowie, ul. Półłanki 18, 30-740 Kraków, NIP: 6793082897, REGON: 122593008. Dane osobowe przetwarzane będą wyłącznie w celu nawiązania z Państwem kontaktu oraz w prawnie usprawiedliwionych celach administratora danych. Podanie Państwa danych osobowych przez jest dobrowolne ale też niezbędne do nawiązania z Państwem kontaktu. Szczegółowe informacje na temat przetwarzania Państwa danych osobowych możecie Państwo znaleźć w naszej Polityce prywatności na temat zasad przetwarzania danych osobowych. Pola oznaczone (*) są wymagane

Najlepsze celowniki kolimatorowe z Vector Optics według klientów — sprawdź inne produkty z serii

Vector Optics to firma, która od ponad 10 lat produkuje na całym świecie szeroką gamę wysokiej jakości i precyzji lunet, celowników laserowych, dalmierzy, latarek, szyn montażowych do broni.

Dovetail to niezwykle wytrzymały i bardzo lekki celownik kolimatorowy wykonany ze stopu aluminium 6061-T6. Urządzenie posiada 6-stopniową regulację natężenia punktu celowania. Optyka pokryta jest powłokami antyrefleksyjnymi, co minimalizuje nieporządane odbicia, a także straty światła przechodzącego przez optykę.

Dedykowany do montażu typu dovetail/Waver 11mm. Nie pasuje do szyn typu Picatinny 21,2mm.

Cechy:
  • Rozmiar soczewki: 17x23mm
  • 6 poziomów jasności plamki
  • Czas automatycznego wyłączenia 60 minut
  • Rozmiar punktu celowniczego 3,5 MOA
  • Wysokiej jakości stop aluminium 6061 T6 w trwałym czarnym matowym wykończeniu
  • Odporność na wstrząsy, wodę i parę wodną
  • Układ optyczny z wieloma powłokami
  • Zasilanie baterią CR2032 - nie dołączona do zestawu
  • Długość: 46 mm
  • Szerokość: 28mm
  • Wysokość: 37mm
  • Waga: 70g
  • Zakres regulacji (góra/dół): 80MOA
  • Zakres regulacji (prawo/lewo): 80 MOA
  • Paralaksa: ± 1,0 MOA
Pasujące produkty to: SCFRM-01P, SCRA-67P


Bezpieczne i świadome użycie

Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.
SKU: RDSL18 · EAN: 6976386124064 · Celownik kolimatorowy VictOptics V3 1x22 Dovetail - black [Vector Optics] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent
Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · [email protected]
Producent:

REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH

Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail [email protected]
* Ceny z podatkiem VAT, bez kosztów transportu