AK Adapter do szybkoładowarki [BD]

Coś na co czekałem od dawna. Jako posiadacz replik AR kupiłem szybkoładowakę do kulek, ale nie dało się naładować nią magazynków od AK. Posiadam również replikę AK i do tej pory każdy magazynek ładowałem małym speedloaderem - co było frustrujące - teraz ten problem zniknął.
Wykonanie solidne, magazynki dobrze pasują oraz ładują się bez problemu. Moim zdaniem must have przy replice AK.

W pierwszej chwili myślałem że magazynki nie pasują ale przejściówka musiała się po prostu rozrobić, teraz wchodzą idealnie. Warto się w to zaopatrzyć jeżeli nie chcemy tracić czasu na ręczne nabijanie magów od ak.

Adapter spełnia zamierzoną funkcje pasuje bez problemu ale zabieram jedną gwiazdkę, ponieważ o ile adpater do szybkoładowarki pasuje idealnie to z wpinaniem do niego magazynków jest problem wchodzą z lekkim oporem i jak ktoś na siłę będzie próbował wpiąć to można ułamać wymaga to lekkiej wprawy bo po kilku wpięciach i wypięciach opanowałem technikę wpinania magazynka do adaptera.

With a bit of force, you can fit LCT magazines in them. Though it's scary, especially since the lip of the AK mag can easily break off. Still, once it's fitted correctly, it makes filling them easier.

My E&L magazines however, don't seem to fit at all in this thing, and i would avoid pushing it further.

Sajnos nem hozta azt amit elvártam tőle , mert nagyon darabosan és nehézkesen lehet vele tölteni a Cyma és Specna Arms táraimat, esetleg valaki másnak bejöhet, de nekem majdhogynem használhatatlan. Cyma ak-74 tárakat be sem lehet akasztani rendesen a tárak kialakítása miatt

Unfortunately, it did not work what I expected from it, because it is very hard and difficult to load my Cyma and Specna Arms magazines, it might work for someone else, but it is almost useless for me.Cyma ak-74 magazines cannot be hung properly due to the design of the magazines.

It works, but it needs a bit of force to fit CYMA AK mags. It is only in, if it is fully on the face of the mag. On the other hand, it does work, if you have an AK, get it! I recommend it, you should get it

EN:
Perfect for CYMA magazines. They fit very well (I use the CM. 103 ones) and it loads the bbs fast without jamming. The quality is not the best, but it sure saves time.

IT
Perfetti per caricatori CYMA. Si agganciano perfettamente (uso i caricatori del CYMA Cm. 103) e caricano i bb perfettamente e velocemente senza intoppi. La qualità non è delle migliori, ma sicuramente aiuta a risparmiare un sacco di tempo

Magazines fit in well, but when you load it is not soo smooth, and it is hard to tell when a magazine is full, the material is not the best and feels like it will fall apart. But it works and you definitely save time compared to normal speed loader.

It's a shame that all of those bigger speed loaders are only meant for AR platforms. I bought this a few days ago and am very pleased with it. Although it would be nice if I wouldn't have to use adapters at all but this one is compact enough that I don't even notice it.

Finaly, one of the most waited tools in my airsoft career. What can I say - pure happines, so just buy it!
Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it! Buy it!

Sadly it's hard to recommend this piece..

Build quality:
It's made of cheap plastic, so be careful when attaching a magazine.

Fitment:
All my magazines are the AK74 5.45mm types.
I had issues fitting Battleaxe metal magazines, Arcturus magazines have to be pushed in, but will attach, and Cyma plastic magazines fit's perfectly

How it works:
Once attached to the loader, and a magazine is inserted, you start to fill up a tray, once full you will start to hear the magazine being filled, once the wheel starts getting stiff, make sure the trapdoor on the speedloader itself is closed, rotate the loader upside down, otherwise you'll loose all the bb's in the tray (around 20 bb's) remove the magazine have a thumb loader ready and top the magazine off, since the adapter won't fill the magazine all the way.

This adapter is only usable with the Big Dragon speedloader (find it under BD7485 in the search bar)

It had no problems with the APS, CYMA and Arcturus AK magazines, either metal or plastic ones. The loading is quite fast and easy but a bit loud to be used during the skirm in my opinion. I use it in the respawn zone though

The adapter itself sits nice and tightly in the adapter. When inserting it for the first time, you should lift the handle of the speedloader up, insert the adapter and then you can fold the handle back in the original position.

Careful when releasing the magazine from the speedloader. Due to construction of the adapter, 10-15 bb's will come out when releasing the magazine. Hold it upside down when doing so and then you can catch and reuse the bb's (never pick them up again from the floor though)

A very useful adapter for filling AK mid-cap magazines. It fits in the quick loader with no problems and the magazines fit tightlly in the adapter (I tried it with Cyma, Battleaxe and Real Sword metal magazines). Also, when you remove a full magazine from the adapter and insert the new (empty) one, turn the quick loader upside down - otherwise you'll looze about 20 bb-es (they will fall out of the adapter). However, the adapter makes the quick-loader even more bulky - very hard to carry it with you on a vest.