Strike industries 4" Raiders Competition PDW AEG Rifle, GEN-2 - Blue [EMG]

Licensed Strike Industries 4" Raiders Competition PDW replica by CYMA and EMG is an ultracompact AR15 platform AEG model designed for aggressive CQB gameplay and operation in very limited spaces. The short construction and fast operating system support instant trigger response, maximum mobility, and control in tight spaces.

Construction and design

The model replicates the Strike Industries Raiders Competition PDW configuration with a short build and a compact Strike Rail handguard. The platform is based on a top Picatinny rail and an MLOCK interface, allowing the mounting of optics and lightweight accessories.

The replica features licensed Strike Industries markings and characteristic platform elements such as the fire selector, trigger, bolt catch, and charging handle in SI style.

Manufacturer and context

Strike Industries is a brand developing modern AR15 platform components, focused on ergonomics and speed of operation. Competition versions are distinguished by their sporty character and configuration adapted for dynamic gameplay.

Build quality

The construction is based on a metal receiver and durable polymer elements, which contributes to resistance to intensive use and stability of the entire replica. Good fitting of parts reduces play and supports repeatable operation.

Ergonomics and usage

The PDW configuration maximizes mobility and allows fast handling of the replica in tight spaces. The short form makes maneuvering in buildings and during dynamic transitions between obstacles easier.

The adjustable stock allows length adjustment to the user, and hop-up adjustment is accessed after pulling the bolt back.

Gearbox V2 GEN-2 - Heart of CYMA Platinum replicas

The new generation of CYMA Platinum replicas is equipped with an improved V2 GEN-2 gearbox designed for high rate of fire (~27 RPS) and intensive use. The reinforced shell features improved bearing seats and radiused stress relief cuts, supporting structural durability.

The 13:1 gear ratio and short-stroke setup support very fast trigger response and a dynamic operating cycle. The system runs on 8 mm steel ball bearings, and the piston is equipped with a full steel tooth rack. The assembly is completed by a metal, bearing-supported spring guide.
The QSC quick spring change system is used, allowing efficient adjustment of replica power without full gearbox disassembly.

Electronic system - Eshooter Kestrel V2

The replica is equipped with the Kestrel V2 ETU system, which is responsible for controlling the operation of the replica and the stability of the electrical system.

The system allows programming via the trigger, supports fire modes such as burst and binary, as well as pre-cocking and active brake functions supporting cycle control.

The unit includes protections against overload, motor lock, and incorrect battery voltage.

High Torque motor

The long-type neodymium high torque motor supports stable operation and system responsiveness, which is important in dynamic firing.

Accuracy and shot consistency

The 125 mm inner barrel with a 6.03 mm diameter supports shot control at short range.

The metal rotary hop-up chamber allows precise adjustment of BB flight trajectory.

The replica achieves approximately 280 FPS (~0.73 J) from the factory and a rate of fire of around 27 RPS.

Power supply

The battery is installed in the stock tube. The replica uses a T-connect plug.

In the set

• Strike Industries 4" Raiders Competition PDW replica
• 2 mid-cap magazines 210 BBs
• speed loader

Recommended accessories

• 210rd Polymer STRIKE MAG M4/AR15 Magazine [EMG]
• 190RD Lancer L5 AWM 300 Blackout Magazine For M4/AR15 [EMG]
• Gens Ace 25C 1200mAh 3S1P 11.1V Airsoft LiPo Battery T-Plug
• Gens Ace 25C 1100mAh 3S1P 11.1V Airsoft LiPo Battery T-Plug
• Gens Ace 25C 1200mAh 3S1P 7.4V Airsoft LiPo Battery T-Plug
• V3+ Charger for LiPo/LiFe 2S/3S [IPower]