[Set] WE09K assault rifle replica [WELL PRO] + Support Fore Grip - Black [FMA]

Der Griff ist wertig, stabil und sieht super aus an meiner cyma Scar L, kann ich nur empfehlen!
Ich habe den schwarzen griff für meine Waffe in Tan verwendet.
Der Griff rundet die Waffe perfekt ab, gibt einen guten Kontrast und stabilisiert die Haltung.

Für mich der perfekte Handgriff. Das Handgelenk ist nicht überdehnt und kann den Zeigefinger zum schnelleren zielen hernehmen.
Nur bei ICS M4 Model ist zu beachten das wenn der Handgriff zu nah am Magazinschacht ist lässt es sich nicht mehr komplett aufklappen.
Und ein Riesen danke schön an Taiwangun für die schnelle Lieferung super

This foregrip feels very solid once mounted and greatly improves the handling of my rifle. It provides a comfortable grip, helps with weapon control during rapid movement, and doesn't wobble at all. The polymer feels durable and installation only took a few minutes. Great accessory that makes the rifle much more comfortable to use.

Super powerfull for a economic aeg:
barrel have to much moviment up/down left right.
I think it’s impossible monunt a scope or a red dot for this disallineament
Whit 11.1 have a grat rof (18bbs) e reactive trigger response.

The idea to buy this foregrip came from COD MW DMZ. I was very satisfied how good it feels on the gun. The grip is quite firm and sits very tight on the picatinny rail. I would recommend for befinners and seasoned airsoft players as well. Also very food because it does not bloc your hand too much.

Nice feel on the hand and very tight fit. However its geometry does not allow it to be installed on certain handguards as the side wings might block with the handguard. This was the problem on the Arcturus AK12, which this was intended for. For less chunky handguards like M4s this is perfect

The FMA Support Fore Grip in black is a lightweight and affordable angled foregrip designed for airsoft rifles using standard Picatinny rails. Made from durable polymer, it feels simple but solid in hand, offering a good balance between weight reduction and stability. Once mounted, it provides a noticeably more comfortable and natural grip compared to holding the handguard directly, especially during longer skirmishes.

In use, the angled design helps improve weapon control and reduces wrist fatigue, allowing for a more relaxed “C-clamp” style grip that many players prefer for better handling and faster target transitions. The textured surface also adds extra security, preventing slipping even in dynamic movement or wet conditions.

Installation is straightforward, although the fit on the rail can be quite tight, which ensures stability but may require some effort when attaching or removing it.

Overall, this is a budget-friendly and practical accessory. It doesn’t offer advanced features, but it delivers exactly what it should: improved ergonomics, better control, and reliable performance for everyday airsoft use.

The WE09K assault rifle replica by WELL PRO is a modern AK-style AEG that offers impressive value for its price range. Built with a combination of durable polymer and metal components, it strikes a good balance between weight and sturdiness, making it comfortable to handle during long airsoft sessions. At around 2.5 kg, it remains lightweight without feeling cheap.

Performance is one of its strong points. With a muzzle velocity of around 400 FPS and a 6.03 mm inner barrel, it delivers solid range and accuracy straight out of the box. The included ETU MOSFET system improves trigger response and allows for more advanced firing control, which is a great feature at this price level.
Ergonomically, the folding and adjustable stock, along with multiple Picatinny rails, make it highly adaptable for different playstyles. However, some weaker internal parts, such as the hop-up unit, may benefit from upgrades over time.

Overall, the WE09K is a reliable, feature-rich choice for both beginners and intermediate players.

This rifle is a very practical choice, especially for dynamic airsoft games. It performs reliably, feels comfortable in hand, and overall gives a solid experience during matches. The folding stock is a big advantage – in tight spaces and CQB situations it’s much easier to move around with it. When folded, the gun becomes more compact, which is a real benefit in close engagements.
The weight is pleasantly light, even with an optic mounted. During longer game days it’s not tiring to carry, which in my opinion makes a big difference.
Performance-wise, it shoots consistently between 398–402 FPS with 0.20g BBs. That puts it right within most field limits while still offering good range and solid effectiveness.
Of course, it’s not perfect. The small plastic tabs that hold the top cover in place can break quite easily, so that’s something to keep in mind. The stock hop-up unit is also not its strongest point – upgrading the hop-up rubber and nub is pretty much a must if you want to get the most out of it in terms of accuracy and consistency.
Overall, in terms of price-to-performance ratio, it’s a very strong option. With a few small upgrades, it can easily compete with much more expensive AK platforms while staying far more budget-friendly.

I use this angled grip on my WE09K replica, and I am very satisfied with it. The biggest advantage is how comfortable it feels. The ergonomic design provides a secure and natural grip, which makes handling the rifle much easier and improves overall control. Even after a long day of gameplay, it doesn’t become uncomfortable or tiring to use.
In terms of value for money, I think this is one of the best angled grips available. It feels solid and stable once mounted on the Picatinny rail.
The only downside is that it can fit very tightly on the replica. While this ensures stability, it also makes it a bit difficult to remove.
Overall, I would definitely recommend it to anyone looking for a comfortable and affordable angled foregrip.

This rifle is a very practical choice, especially for dynamic airsoft games. It performs reliably, feels comfortable in hand, and overall gives a solid experience during matches. The folding stock is a big advantage – in tight spaces and CQB situations it’s much easier to move around with it. When folded, the gun becomes more compact, which is a real benefit in close engagements.
The weight is pleasantly light, even with an optic mounted. During longer game days it’s not tiring to carry, which in my opinion makes a big difference.
Performance-wise, it shoots consistently between 398–402 FPS with 0.20g BBs. That puts it right within most field limits while still offering good range and solid effectiveness.
Of course, it’s not perfect. The small plastic tabs that hold the top cover in place can break quite easily, so that’s something to keep in mind. The stock hop-up unit is also not its strongest point – upgrading the hop-up rubber and nub is pretty much a must if you want to get the most out of it in terms of accuracy and consistency.
Overall, in terms of price-to-performance ratio, it’s a very strong option. With a few small upgrades, it can easily compete with much more expensive AK platforms while staying far more budget-friendly.

Feels really sturdy on my Daniel Defense MK18. It doesn't wobble at all, which some have stated it would. Easy to install and makes for a perfect C-clamp-esque grip technique. Feels more comfortable than the vertical grips I've tried.

Honestly, this gun is better than I thought it would be. It's pretty accurate replica. Just the right weight and size. You can modify it to your liking. It shoots quickly and accurately, so I recommend using a drum mag on this gun. The gun withstands sand, water, and mud most of the time. A very good choice for your first replica and I highly recommend it.

Exceptioneel quallity, the replica is easy to operate and to maintain . I love how it looks and how it feels when aiming and fireing .
Great tune down service I got a sheet of values from testing so I am sure I can use it on the field.

This AEG foregrip is a game-changer! Feels solid and super comfortable, giving me way better control and stability during fast-paced matches. Easy to mount, fits perfectly, and adds a badass tactical look. Definitely worth it!

Simple plastic angled handle grip for your gun. To avoid my mistake, make sure that your gun has rails under the barrel, otherwise only place where you will be able to place it is next to your sight which is not very useful.

The construction seemed good polymer, but the hinges for the dust cover is a weakpoint, and broke off on the first game. I have the we06, with similar construction where the construction has held for over a year.
The mosfet likes to turn off the gun when inactive for 15-20 minutes, causing frustration when you get in to a gunfight and nothing happens.
The replica feeds well and the trigger is responsive. If you can look away from the small shortcomings the replica is very good value especially on sale.

If you're looking for a solid AK platform, I break down everything you need to know in my full review—covering externals, internals, upgrade potential, and real-world performance. Watch the full video here: https://youtu.be/bZbpUXRIAY8?si=sLt0DupstFdLGr4p

I had been considering this replica for a while before deciding to buy it. I was a little skeptical of the polymer construction, but I decided to give it a try and purchase one.

When it arrived, I was pleasantly surprised with the replica. The weight was perfect (not too light and not too heavy), and the construction feels solid. It's definitely a high-quality polymer construction, and it feels very sturdy.

The replica shoots very accurately and performs great thanks to the ETU. It has many modes available to choose from, such as Binary mode, Burst mode, and five different pre-cocking settings.

When using pre-cocking, the replica is very snappy and responsive. However, I would recommend turning off pre-cocking when storing the gun for long periods of time to prevent the spring from staying compressed inside the weapon.

I would recommend this replica to anyone who likes the AK-12 look and is looking for a competitive and solid airsoft replica under €200. After trying out many replicas from different brands, I can confidently say that this one offers the best price/performance ratio on the market.

I would also like to give a special thanks to the staff at TaiwanGun, especially Wojtek, who provided me with very good and fast customer service.

Very happy with my purchase, I already own a WE06 and bought this after my experiences with my WE06.

Solid with no wobble on the polymer, the stock sits tight and the adjustable rest sits firm in both positions, compared to some other owners experience with the resting point.

Magazine is like on most AK wobbly but it feeds with no issue. Seems to be an AEG AK feature hard to avoid.

My Double Bell and Cyma mags fits and feeds too without problems.

IMO this is the best AK below 200€. It gives you more options for accessories compared to AKM/74 designs.
Steel or metal receivers may be fun but it adds weight I rather be without when playing for a whole day.

Best Gun Under 200 euros!
I was amazed how good this gun is! Good quality, shoots very good! Iron sights are also good.
be aware that place where your battery goes its pretty small (under dust cover)

Best budget gun.

This is the AK on the market if you're on a budget
or maybe the best gun on a budget.

Pros:
- Lightweight but sturdy construction
- ambidextrous fire selector (though the ak selector is hard to operate)
- great performance
- great fire rate
- just feels good to hold

Cons:
- the cheek riser is very wobbly, stays hard in place
-the selectors in m4 style, not ak for going from safe - to full auto


All in all, it is an good replica for the price point. Big recommendation for anyone who wants a great AK or an AEG with a high fire rate

So far so good, still have to field test it on a skirmish but nothing is wobbling and the gun seems solid in the hand,the too cover takes a while to get used to how to take off and put back on, luckly it has hooks to align itself

Una réplica con la que estoy encantado,es super bonita,y un rendimiento espectacular por el precio que tiene,buen alcance y precisión,y los cargadores están muy bien de precio,la recomiendo sin dudarlo.

Két játékon vett részt a replika. Szerintem nagyon kezes kis cucc. Kapott egy átnézést,egy omega hop up-ot lenyomóval. 30as bb-vel 1.4j és 320 FPS. Nekem bőven elég. A szórása 40m-en kb8-10cm. 55m-ig próbáltam,és az A4-es célt 30-ból 26szor vitte.
Maga a replika nem lötyög,zörög. Egyetlen ami szàmomra negatív,hogy a tokfedél stift állandóan kicsúszott használat közben. Egy 5-ös csavarral cseréltem.

I have played with the replica 2 games already. This is definetely one of the best value for money ifnyou want AK platform.
Let me share some pros and cons to make my review more objective.

"+"
Light weight
ETU / mosfet (binary, burst, pre-cocking)
High quality nylon. It doenst look like a plastic toy at all.
Quick spring change / easy access
Mid cap mag for 180bbs from the box
Good quality steel gears 18:1
1.3-1.4J from the box

"-"
Outer barrel is wobbling. You will have to fox it yourself if you want descent accuracy.
Shity piston and piston head. Poor compression. Cylinder head is also garbage
Very cheap hopup bucking. There is low accuracy from the box.
Binary functions works incorrectly. AeG is shooting auto in binary mode. It happens randomly, especially if you press the trigger quickly in the binary mode.

I changed many internals to improve performance. I installed 6.03 inner barrel, shs piston, aluminium piston head, and aluminium cylinder head.
Changed hopup bucking to maple leaf super macaron.

Performance increased to 1.6-1.65J with default spring.

Despite all tye cons I recommend this replica to both beginners and advanced players if you are searching for authentic and light weight AEG.

I bought this because of one of my subscribers, I had not noticed this new gun. Well well well ^^
Surprised by the excellent price/quality ratio even if there have been a few quirks reported to me : sector gear axis broken after a hundred rounds, stock length adjustment latch broken after a few manipulations ... Maybe Well pro need to step up on QC controls but they've made a nice product here. 4 stars because of the different issues that have been reported to me but we've got a good basis.

I wont get into the details, you can read and watch my full impressions here (translation available) : http://lantredudingo.com/index.php/2024/05/15/review-well-pro-we-09k-ak12-2023/

Thanks TWG for your service, as I was pleased with the first one I bought a second one ^^

Best budget AK12, period.

This is by far the best AK12 on the market if you're on a budget, and maybe even one of the best budget AK's in general.

Pros:
- Lightweight but sturdy construction
- ambidextrous fire selector
- great performance out of the box
- incredibly competitive price

Cons:
- I'm pretty sure it has a few proprietary parts (for example the fire selector)
- the cheek riser on the stock is very wobbly


All in all, it is an excellent replica with a barely beatable price point. Big recommendation for anyone who wants a great AK for a small price!

Good quality, however didn't fit lower rail of my JG082 S-552 Commando II, potentially might not fit if there's not enough clearance in front or in the back of the picatinny rail. Might also look if you have enough space between the body of the gun and rail itself, might also not fit if tight fit, grip slides onto it and requires surprising amount of space to fit.

Foregrip works as intended, it is plastic, secures good into place. I consider it a good purchase for under 10 euros. It really helps when gripping a gun especially around corner. I would recommend this buy for everyone.

Lightweight, simple, reliable and affordable. Nothing else to say.
May be a bit tight when installing for the first time.
Do consider how you reload while positioning (if you use AK or smth other than AR platform)

Its ergonomic design offers a comfortable and secure hold, minimizing fatigue during extended use. The textured surface provides a non-slip grip, even in wet conditions. With its quick-detach mechanism, it allows for easy installation and removal. Whether you're engaging in precision shooting or tactical operations, this fore grip enhances stability and control, resulting in improved accuracy and performance.

Honestly, it's a pretty ok foregrip, you get what you pay for. It does the job and it does it well. However, it was a massive pain to put it on at first, as it is incredibly tight. I injured myself a few times while trying to put it on. 4 stars!

+ Cheap
+ Good grip on hands
+ Looks sturdy

- Doesn't fit correctly on picatiny rail and rattles
- Mounting is slow and can't be done on field
- Held in place with flat head screw

I won't use it unless I find a way to modify it so it won't rattle on picatiny rails.

Price to performance is stellar. It fits like a glove. With my mid-sized hands it handles really well, and I can imagine people with both large and small hands will think the same!

If you are thinking of getting one, do it! In my next order I will get me a second one.

Steady and cheap foregrip, feels good in the hand!
Tight fit on the rail and easy to install.

This grip is quite comfortable. Stays well put and doesn't wobble around. Fits perfectly the front (short) rail of a G36. Would work fine as shown in the picture - right in front of the mag well.

Strong, comfortable foregrip with built-in handstop at the end. It is easy to install. Once it fits, it doesn't jiggle, rattle or sits loose.
I put this on my UTR and can say that I will never take it off. Looks cool for sure, but the added comfort and stability is a night and day difference.
Plus it's cheap AF so yeah, if you're in doubt, go ahead. You will not be sorry you bought it :)

Really great grip, a bit on the wider side I would say, but for me - I have big hands - they worked perfectly. Only tested it in one game so far but was really pleased with it, really well built and solid when you put it on the gun's rails.

The Support Fore Grip from FMA is an excellent choice for airsoft players looking for reliable and versatile grip options. Its vertical angled design provides a comfortable and stable grip, while the durable construction ensures long-lasting performance. The grip is easy to install and compatible with most airsoft guns, making it a great addition to any player's loadout. Overall, a top-quality product from FMA.

The grip is comfortable to hold.

The fit on a standard picatinny rail is extremely tight. While it did require the use of a rubber mallet to position to grip, it will definitely stay on there with good stability.

Very good product highly recommend
You should buy from Taiwangun since they have the best products on the market at affordable prices! Bought many products from them for me and my friends and we never got disappointed once :)