[Set] Noveske 10.5" Gen III Shorty 300BLK AEG Rifle - Tan [EMG] + 190rd LANCER L5 AWM 300 Blackout magazine for M4/AR15 [EMG]

Top Magazine 190 BB's optisch 1a und technisch auch,wenn man eine
Seite von den Dummy Patronen weg macht (geht ganz einfach ist nur einen eingeschobene Folie)
sieht man auch die Anzahl der zu verbleibenden BB's und zu guter Letzt sie funktionieren einwandfrei in meiner Wolverine MTW Forged 10“ gen.3, in der HK 416 (VFC), in der DD MK18 (Specna) und Krytac PDW V1

Top Magazine 190 BB's optisch 1a und technisch auch,wenn man eine
Seite von den Dummy Patronen weg macht (geht ganz einfach ist nur einen eingeschobene Folie)
sieht man auch die Anzahl der zu verbleibenden BB's und zu guter Letzt sie funktionieren einwandfrei in meiner Wolverine MTW Forged 10“ gen.3, in der HK 416 (VFC), in der DD MK18 (Specna) und Krytac PDW V1

Good: High Capacity Mid-Cap Mag for a good price. The magazine can be easily disassembled for maintenance work. Looks are not bad at all, even for just paper inlays.
Bad: Had problems with 2 of my replicas, in my ICS UK1 with maxx hopup chamber, the little BB catch would get stuck all the way back, need a screwdriver to get it unstock. While stuck, the mag can not contain any BBs.
In my Firehawk, the mags need high pressure (aka slam it and hit it with your fist into the mag well) to lock.

Awesome product,solid and good working!Seems compact and not much heavy.Is a good piece and the price is fantastic!Thank you and I buy again!I bought 4 of them for my replica Noveske N4 and works very well,feeding easy 120-150 bbs

Very nice magazines with nice touch with the painting of bullets.. .. it's also transparent, a detail that I love, and you can see the bb's when you are loading the magazine so you can't reach the maximum point and damage the spring inside.
Very light material.. solid construction

Great mid-cap, really. Looks wise at least.

Does give my poor ICS a severe midcap syndrome, so it’ll need some work to ease the spring and allow it to feed properly. On the other hand it fits snugly in the magwell and it looks stellar.

I did hope for proper sculpted dummy bullets, but it’s just a printed insert. But no one seems to notice.

Caricatori fatti bene, esteticamente poco accattivanti, pescano benissimo e si adattano a tutte le mie repliche pescando fino all'ultimo pallino, anche il prezzo è buono, la capienza dei pallini è di circa 190 bb che lo rendono un prodotto eccezionale.

The big plus for these mags is, that they are see through.
When full about 180 BB's fit. You don't see all but, in the front are first 30BB's, on the back side you see to about 70 and on top of mag (if it's not inserted into a replica) you're at about 90,100. Fits both my Cyma and Cyma platinum M4 well.

The replica is very well constructed, the body is full of Noveske logos, with very well made details like the charging handle.

It's a little bit heavy for the dimensions, but it's very well balanced, and one of the best grip i've ever had. Only downside it's the impossibility of mounting inclined mlok accessories like in my URG-I rail.

But the best of this platform is the intersals, you have 25/26 bbs out of the box, a good hop up unit and a well made inner barrel, in my last airsoft game this replica was a laser up to 50mt/160ft and could take down even the most "resistant" players ;). Only one thing: you need to change the notoriusly bad Cyma mosfet, but with the Kestrel V2 and re-shimming service of Taiwangun it was made before my replica was shipped. Wow.

I've purchased this airsoft replica thanks to the taiwangun summer sales, this replica is not aviable in my country (italy) due to the high request, so the prices are up to double what i've paid in this fantastic site, so thanks Taiwangun! Best site in all Europe!

Pros
-The best price/value in the market
-Out of the box internals you can use with 11,1v lipo
-Taiwangun modifications
-Cured externals
-Well balanced and fantastic grip

Cons
-A little heavy for the dimensions
-Design flaws in the ris (but it's also in the real thing so...)
-Cyma mosfet

I wanted to buy the original mag for my lancer l15, but it was out of stock, so I got this one, and I can say I'ts decent, but inferior to the original mag that came with my L15 in almost every way, but this one has a transparent top where you can see the bb's. Not a bad mag, but if you can get the 220 rnd mag with the red top.

Fantastic magazine. also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Fantastic magazine. Also on an aesthetic level, with excellent finishes and really well made fake bullets.
They also work perfectly with VFC and G&G.
Really surprised by the build quality and how they work. only note, before using them clean the magazine spring and lubricate it for optimal work.
super recommended

Replika wykonana naprawde dobrze, praktycznie z marszu przyjęła silnik gate pulsar. Idealnie osiowa giwera do CQB. Stockowa komora hop up delikatnie za ciężko chodzi, ale nic z czym nie można się uporać

This thing looks and feels REALLY solid. Out of the box it cycles very well and sounds good on a 11.1v LiPo. Haven't tested the range/accuracy yet, but I'm expecting it to be above average even with the stock bucking/barrel.

If I had to list a con or two about this replica I'd say the fake bullets in the included magazine do not look all that great. And the replica comes with a standard tan sopmod stock, not the one that is shown on the images (MOE SL clone?).

This is a very solid base for a cool looking Devgru build. 10/10 would recommend.

With "RetroArms" Hop-Up Chamber this MAG doesn´t fit on Cyma Noveske. It´s imposible to use it, any bbs can´t up to chamber.
That´s the worst part, cause it´s look badass with the replica.

100% perfect fit for my EMG noveske N4(with APS gearbox). Had some problems with specna arms mags for my replica but These feed without any problems they look and feel amazing and really complete my Noveske build idea. Definitely works for EMG, APS and Cyma can work for other brands but haven't tested yet.

One of the best product on the market.
There is no need for any upgrade whatsoever.
It is very precise and ready for use immediately once received.
Very suitable for beginners as well as for professionals.
I would strongly recommend this product

Perfect for the price! Cyma shimming is really good, shoots well.
1000 pros but one con - hop up, turned all the way down still hops too much.

Cant give the gun less than 5 start. Perfect.
These Noveske markings too <3
Thanks dear Taiwangun for the 2day delivery <3

This is my first polymer m4 mags, they feel amazing!

Solid and firm. No wobble on them. The lancer markings are excellent, and the fake bullets! Oh my, they look freaking awesome :D Really realistic.

My only problem is there is no option to buy black bottom plate ver of the mags!!! But some spray paint can fix that.

They feed great! I've had zero issues with feeding, Loading the is also really easy if you have a speed loader!

Please also read the description of the mags on taiwangun. Midcaps should be treated right :)

This gun performance was exhalent, the only issue was getting a pin out of the gearbox to change the spring, but I came through, if you want to upgrade it so its prefect, you should buy a new barrel so it shoots more accurate. over all its the best gun i have tried and owned. happy days:)