[Set] MK12 MOD0 SPR [Double Bell] + Li-Po Battery 600mAh 7,4V 20C - Tamiya [VB] + V3+ Charger for LiPo/LiFe 2S/3S [IPower]

Unschlagbar für den Preis!!

Ich habe mir diese Replika gekauft als basis für ein HPA Projekt. die Externals sind wirklich schön! Zwar ist sie mit front Ironsight und der schönen und originalgetreuen Toprail recht schwer, allerdings kann man diese auch abmontieren für ein etwas besseres handling. So istvsie dann angenehm leicht wie viele andere replikas. Ist also Nur ein Plus. Bei Cyma ist diese Rail z.B. garnicht inkludiert. Auch die vielen Stahl teile haben mich sehr gefreut wie zb der Funktionierende Bolt catch und release mechanismus aus stahl. Die fake bolt "plate" ist etwas dünn ausgefallen aber das ist kein problem.

Zu den internals kann ich nicht viel sagen außer dass sie mir am ersten spieltag keine probleme bereitet hat. Habe ein ZCI hopup Chamber mitbestellt und gleich ein Mapleleaf super macaron 80° Silicon reingehaut. (hatte ich rumliegen empfehle ein 60-75°). Allerdings war bereits ein Rotary hopup chamber eingebaut was mich positiv überraschte.
Es ist ein Messing lauf verbaut

Hello i buyed this Charger for my and my Friend it Works it is Good ! Good job !
V3+ Charger for LiPo/LiFe 2S/3S [IPower]
I am Happy to have found this Taiwangun and the Taiwangun Support is very Helpful ! Thank you !

Habe das Ladegerät für meine Lipo Akkus gekauft und es funktioniert alles perfekt. Die Akkus werden schnell geladen und es wird auch angezeigt, wenn die Akkus voll sind.

Very easy charger to use and a good choice for 2S and 3S LiPo or LiFe batteries. The indicators are clear, the size is compact, and charging has been stable every time I used it. Simple, practical, and reliable for regular airsoft use.

A simple and convenient charger for airsoft batteries. It is easy to use and works well with 2S batteries. The compact size is also useful because it doesn’t take up much space in my gear.
Overall, a good basic charger for the price.

Really happy with this charger. It’s simple to use, compact, and does exactly what I need. The batteries charge pretty quickly and the price is really good for what you get. I’m satisfied with the purchase and would definitely recommend it.

Well, what can I say about this charger?
It's perfect for any batteries you have, althought for specific batteries voltage (check the techical data or lower in description). And to charger my battery, it tooked like 1.30 or 2 hours

This charger is simple to use and works perfectly. The charging indicators are clear, and it charges my batteries safely and efficiently every time. It's compact enough to take with me to games and gives me confidence that my batteries are being charged correctly. Excellent product for anyone looking for a dependable charger.

Does the job it is designed to do.
Light indicators are a great way to track if the battery is full.
Cord is a bit short.
I recommend buying a charging bag with a charger.
Design is not great but you are probably not buying this for its design.

Not much to be said here only that it charges. the led to let you know its fully charged is nice. The charger is made for EU wall sockets so if you live in a country with different sockets be prepared to buy an adapter which is only €2

Claims all my batteries are charged despite them being one being 22%, another 70% and only one at 86%.
Maybe the one I have is defective, but it has charged the one that is at 22% to a full state multiple times in the past

I base my review in price/use.
The gun it self is made of a combination of good materials. The weight is hefty, but I've always handled airsoft as a motoric learning, therefore I needed it. For the finnish, I'd say it's alright, standard matt enamel. Stock and handle are plastic, otherwise all metal. Comes a little bare out of the box, but has a nice muzzle device already covering the threads, which is a must on the original. A bit out of thread, I've put a 22x2 mm O-ring before it. Also printed my own design suppressor, specifically for this gun, I'll put it up somewhere later. I didn't buy the MOD 1, for the obvious reason, this gun is pre-tacmaxing era, and I love it that way.

I have not open it yet, but the gears are fast from a 7.4 Volts LiPo. I'd use a lower bat and a medium mag, but it has automatic, so, trade as you will. I bought it as a DMR, I'll limit it with a circular selector plate. The FPS is okay for veteran, it's a bit spicy for beginner games. As a role, it's perfect for the SPR way, get a good Victoptic S6 LPVO on it. I have a B1 fix 4x, printed a riser for it, messed around with the hop up. Oh, yeah, the hopup.

The hopup it self needs a flat nub. The gun it self is amazing on it's own. Factory bucking is good. Runs .28 with no effort, but I would buy .32s or even .40s if you are alright with dropping at 60 on target. Those may need a Macaron 60° +
Range is good.

People might find M16 stocks a bit long, that's not a problem to me. But dont buy it if you haven't played basketball and haven't had success in touching tha plank.
The stock needs a sock, your shoulder will thank you for it!

Overall, I love it. Specially for the weight and it's feel.

Really glad I got this charger! It makes charging my LiPo batteries super simple and worry-free. The lights let me know exactly when the battery is ready to go, and it charges pretty fast too. A must-have tool to keep your gun running all day!

Chargers came with a solid cardboard box and with a power cord. Very easy to use and charges batteries very fast.
Used it 2 times so far, I’m okay with the product.
Would recommend for any beginner.
Only downside is that it’s not capable of taking the batteries to “storage” mode. Other than that it’s good!

An essential tool if you are switching to Li-Po batteries. It's very simple to use: just plug it in and wait for the LEDs to turn green. It feels safe, doesn't overheat, and the compact size makes it easy to throw in your gear bag.

Double Bell continues to amaze with how good the replicas actually are considering the price! Solid metal bodies, good quality internals, no need to immediately swap out anything (other than the spring maybe if you're like me and like it to shoot a little less hot - mine chronoe'd 1,75 J straight out of the box!). This model was not familiar to me beforehand, and the frontend seems interesting. One would think that the little rail pieces can be moved freely to any threaded slot on the frontend, but no, the holes don't line up (so I will probably modify some spare rails to fit the center of the frontend and then I can use a vertical foregrip). The plastic parts seem very good quality as well, no creaking whatsoever. I'm really satisfied with this purchase.

Jól összeszerelt termék. A test alsó és felső része nem lötyög, mint a legtöbb M4-es. A puska így is jó, de DMR alapnak is kiváló. A plusz felső sín extra stabilitás ad a test és az előagy között. Azt üres tus miatt eléggé orrnehéz, célszerű ezt kompenzálni valamilyen súllyal.

The charger make what he can! I used twice until when i buy that. I tink this is a good product for this price! The charging time is common. I recommend it to beginner players who dont want to invest a lot of money in the game at the beginning.

A timeless classic. When you choose to buy an MK12 SPR Mod 0, you already know what you're looking for and what you want chances are you've seen it in some American movie or video. In short, you're a true connoisseur or nostalgic. But in 2020, where could I turn to get one? I just couldn't find it anywhere, much to my disappointment. Then, Double Bell came to the rescue. With great expertise and modesty, they have masterfully crafted this MK12, offering it to us at an incredible price through our beloved Taiwangun!

It arrives at your doorstep in the usual very well-built protective packaging from the trusty guys at Taiwangun. A much-needed package for this replica, as it comes in a rather basic box with no additional protection—just plain cardboard with a few cutouts to keep it somewhat stable, no battery or charger (but we really need an Ni-mh nowdays?)

What you'll find inside is an MK12 that, yes, might remind you of the beloved models that were popular around 2007, but this time with a fresh, juicy, and updated twist. Right away, you’ll notice that nothing wobbles on this replica, thanks to the sturdy handguard that extends along the upper receiver's rail the truly unique feature of the Mod 0.

The colors are pleasantly matte and truly stunning we can't see imperfections. The materials is consistent metal everywhere except for the stock and grip of course. The stock has a matte, rubberized-like finish, but don’t worry it’s not the usual soft-touch coating that turns into sticky glue over time, this is an upgraded finish that looks great and hides any casting lines nicely, making you forget all about the old stocks from back in the day.

Pulling the charging handle, you’re immediately greeted by a chromed mock bolt that locks back in place, ready to be released with a simple tap on the bolt catch, which responds instantly and without hesitation. And here’s another excellent upgrade a smooth rotary plastic hop-up!

Speaking of mechanical upgrades, i can only mention the quick-change spring gearbox, taste of recent days at the same price as the gold old-times, we now get a package full of little upgrades that clearly show the manufacturer’s commitment to satisfying the buyer and give him a real thing. And I have to say they absolutely nailed it with me!

The rest of the moving parts, such as the iron sights and adjustments, are smooth and precise, just like the selector switch, which has a soft yet decisive click. I’ve seen better, but I certainly can’t complain about how well it engages.

I started firing a few test shots, and soon my expectations were exceeded. Let’s not forget that this replica features 8mm bushings, and when I peeked through the magazine well, since I haven’t disassembled it completely yet i saw a gearbox that looks pretty smooth in surface, perfectly paired with the hop-up. A good sign i will wait to open it to find something maybe.

The compact magazine works flawlessly, feeding every shot without any skip even if you move it, right it wobbles but is perfectly normal for this kind of ol'guys that eject the mags without friction when we push the mag release button. The gearbox have smooth cycling, especially for a stock setup at this price point.

What can i say more guys? Is a pretty simple but effective and sturdy piece here. If you’re looking for one and you want it, go for it for my opinion, give it more than just a chance. If you enjoy the marksman role, then its one downside, the weight, won’t be an issue for you because honestly, thanks to the round profile of the handguard, it’s incredibly comfortable to hold and you can plan to install a vertical grip in back area of the front, the rails are free modular here. Just slap on a classic Harris-style bipod, a long-range scope, a mock rangefinder or side-mounted PEQ, and a suppressor, and you’ve got a stunning setup for enthusiasts of the genre.

And of course, you can always go wild with an offset red dot, we all know that on this type of replica, they’re the cherry on top!
Thanks, Taiwangun! Always on point, bringing us these timeless classics at reasonable prices!!

Il fucile è robusto e la linea è bellissima! Un pochino peso ma molto buono, io l'ho preso per convertirlo al sistema Xtag laser! E mi serviva un buon fucile stabile ma che non costasse troppo! L'ho provato con qualche pallino giusto per vedere e fa il suo lavoro! Il negozio Taiwangun è serio e affidabile ormai mi ci rifornisco da anni!

One of the best airsoft gun that I’ve ever seen for such a low price, I can definitely recommend the MK12 by Double Bell to anyone who wants to build a DMR, it comes with a rebranded Maxx piston/piston head, cylinder head and air nozzle, the hop up is a rotary unit and with a good stock hop up rubber and nub. I have 2 in my possession and they are the best DMR bases that I’ve owned.

Pros:
Maxx rebranded compression parts (super airtight)
Good rotary hop-up unit, rubber and nub, can hop 0.4 at 2.5 Joules
Cheap and affordable DMR base
Full metal construction
Includes a high capa and a midcap in the package
Quick spring change
Fake working Bolt catch
Fires 1.8 - 1.9 Joules at stock power
Shoots farther than a lot of stock aegs
Good shimming for a stock gun, doesn’t need reshimming
Cheap to upgrade, only recommends a mosfet, stronger motor and spring and a tight bore steel inner barrel to make it the perfect DMR.

Cons:
The gearbox is a little bit out of spec, be aware of that if you switch out to a full cylinder to fix a small hole for the sector gear to pass by without getting nudged into the cylinder.

The exterior build of the replica is solid, with an upgraded nozzle and piston head, and the shimming is decent. The Quickchange spring system is a nice touch. However, I may have received a defective unit, as the gearbox was significantly out of spec. The sector gear was making contact with the cylinder during rotation, likely due to either a production error or poor quality control from Double Bell. Unfortunately, this issue rendered the replica unusable. If you're considering buying this model, I strongly recommend opting for a TWG tune-up service to avoid similar problems

For the price it's a good replica.
- Weighty, basically full metal body with the exceptions of course being the stock and grip.
- Mags do wobble and might require a little more force for it to sit.
- Would recommend a bipod.
- Also would recommend a sling too
- Has good range

Ez egy nagyon jó kis töltö teszi a dolgát. Aránylag gyorsan is tölt. Jó a minősége söt nem is kerül sok pénzbe ez a töltö! én azt mondom ha bárkinek kell valami olcsó és jó akkor ezt a tőltöt ajánlom. Én teljesen meg vagyok vele elégedve nekem nincs vele semmi gondom teszi azt amit kel neki. Csak ajánlani tudom!

Works perfectly. Very simple charger - you just connect the battery and it charges.

Be mindful to have the bottom switch in the proper position for charging your battery!

I also advise getting a proper measurement device to check the status of your batteries. You can do that with a multimeter, but a dedicated device is about 5 Euros so do not cheap out on it. The charger does NOT show you any info!

Works as intended, fast charges my batteries, never had any trouble at least for now. Build quality is not too high but that is to be expected for a product that costs less than 15 euros. All in all I consider this a good purchase

For the price it was definitely more than value for money, it looks amazing especially with a few attachments on like a scope and bipod. It shoots straight with no jamming on its debut.
One con is the grip is contoured for right hand so my dad found it uncomfortable after a while cos he's a lefty, guess he'll need to get his own gun .

it is a really good charger it charges the batteries really fast and it doesn't destroy them, i like it very much, it is cheap and good of course you have to watch it and don't overcharge the batteries but that's the case with all of the others. I recommend it because it is cheap and reliable

I got what I expected, a cheap plastic charger.
It is very light and hollow inside.
It's not terrible but it's not good charger.
This is a cheap charger and I got what I expected. The charger is made of plastic and is hollow. I recommend it to people who don't want to use the battery for games.

Great and cheap! So fricking fast! I was so surprised :D It only took like 1 hour? idk, but it was fast. Greatly recommend this product! And of course Taiwan gun ships very fast. only took 2 days :) very happy, thank you Taiwan gun.

For the price , this gun is absolutely wonderful . Coming with a tight-bore barrel out of the box this gun shoots super far. The gearbox cycles wonderfully and without any problems . The rotary hop helps to lock in where you want your bbs to go . Now that we’ve talked about internals let’s mention the externals . For a small price , you would think you are getting a polymer body on this replica but no. The full metal externals give this thing a heft of weight that make it feel essentially like a super expensive replica .

The first impression out of the box is that it is a cheap product. And it really is.
The charger is made out of the cheap plastic, it's very light, hollow, and something rattles inside the case.

I wouldn't mind any of the previously mentioned stuff if it worked fine, but for me, it doesn't. Charging was fine for the first few times, but after that the same thing happened as mentioned in the previous review. You plug in the battery, and it never charges completely, the LED is red all the time. I tried it with three different batteries, and it's the same case with all three (another charger charges them without any problem).

As with other cheap Chinese products, the price is very good, and it might work just fine for you, but there is a real chance it will not, and I don't think it's worth a risk. Better quality chargers are available for not much higher price.

Stoped working after first two times. ;( Also hapened to my friend.
Maybe tehere is some factory defect, i was charging, usual lipo stick bateries.
Indiciator shows empty all the time.
Hope to hawe some answer from you guys, also wrote at e mail.

This item is simply amazing, I was very happy when I bought it. I thought it wouldn't fit or I wouldn't like it, but everything turned out very well. I really regret not buying it earlier. Now I always like this thing and I will never leave it. At this price, it is very, very worth buying, believe me, it will really fit you and you will like it. I highly recommend you buy it, and buy it as early as possible before others buy it, because it won't be available. Buy as early as possible, because mine and your last airsoft game will be simply the best, believe me!!!

Truly a great battery charger for the price! But expect some "cons"...

The charger came in a generic carton box, the unboxing experience was really basic, but for the price it's not an issue. Included in the box was the charger, the 2 pin EU cable and instructions.

The Charger itself is made out of what seems to be an injection molded black satinated ABS plastic shell with on top 2 output LEDs, air vents for heat dissipation and a vynil sticker with the name of the charger. On the front side there are 2 ports, a three pin and a four pin one, on the back side there's the AC 110-240V cable port. On the back of the device there are 4 silicon rubber feet, the VERY IMPORTANT MICRO SWITCH that is used to select which type of battery you're charging and a vynil sticker with the informations of the device. The cable is decent quality too.

The IPOWER V3+ Battery Charger has 800mAh max charge current, meaning the microcontroller will manage the charging of the battery cells accordingly to their current level of charge. It will then deliver the right amount of current ranging from a few mAh to a maximum of 800 mAh. This means more battery life but also that the true average charging current is less than 800mAh, just keep that in mind! The charger supports 2/3 cell batteries and can charge only one at time.

The power LED is green and always stays on when the device is connected to AC. The status LED on the other hand has different color codes (Red, Red blinking and Green), meaning the microcontroller is somewhat enough intelligent to detect malfunctions and stop charging to prevent damage and tell you what's going on. In general the charger is not too noisy and the heat dissipation is enough.

But then, where are all the cons? For the price that's surely a bargain, but still...

The charger is poorly built. The plastic shell is decent quality but the charger really feels "light and empty" with very small internal support. That said, if you plan to take it with you it's surely better if you protect it or it could easily break.

Another thing that makes me "wonder why" is that the switch is under the device, meaning you can't easily see it. If it accidentally changes position it could be very painful for your battery... Be careful and always double-check it before charging!

In addition, if lightly shaked my unit sometimes emits a clicky noise (like there's something free moving inside) and have a misplaced rubber foot that is surely going to detach soon. Not to talk about the fact that the cable is just slightly bigger thant the port, so to attach it you really have to push or it won't go. But still, after pushinf it with some force the device managed to charge my battery in just a few hours without any problems!

Overall this truly is a 4 star charger. But that doesn't mean you shouldn't get it! For the price I don't think you could expect or want more, for some people in fact the important thing is just the internal hardware... And it seems like that the IPOWER V3+ decided to put all the budget for the electronics inside, which could be all you need if you want to buy a cheap charger that gets the job done and has a good microcontroller. Tho i wouldn't reccomend it too much if you travel much! Anyway i'm very happy with it as i am the first kind of person ;)

Good product in case of price and quality. I can't say anything special or critical. The batteries are charging properly, there are no breakdowns or problems. If you are saving money and need a stable and efficient lipo battery charger, then you can buy this product without doubts. Moreover, the Taiwangun shop has not yet disappointed with its products and this charger is suitable for both beginners and advanced players with a limited budget.

I've only used the charger once and it seemed to work fine, but the cable it came with did not fit the charger, meaning that the plastic was too thick. I fortunately had the necessary cable, but I am quite disappointed that the cable provided did not work.

V3+ CHARGER FOR LIPO/LIFE 2S/3S
A good balanced charger. Charges the battery in about an hour and has a good light indication when charging and reaching full battery capacity. I use to charge a battery type BATTERY LI-PO 1300MAH 7.4V 20/40C

A great classic DMR platform. Very solid construction with no wobbles nor creaks. Only shoots semi as a DMR should. Highly compatible with AR parts and accessories. Shoots very well out the box. Be warned that It is quite heavy

Ein gutes ladegerät um den preis ist preisleistung top. Hab mir gleich paar akkus auch bestellt damit ich alles auf Lager hab. Nach einigen stunden laden wir es bisschen warm aber werden andere Ladegeräte auch villt bin ich da zu sensibel.

Perfect price-quality ratio. Easy to use it, good "how to use" manual for it. Fast charging, I use with 1800mh accumulators. Made from normal quality plastic material.

Charges up the batteries in good time. Works as intended.
The power cable could be a little bit longer since its a little short i have to run an extension so i can charge my batteries safelly on the table

Very good charger. Had no trouble so far. Very clear instructions on how to use. Charges very well and very fast. Very compact, so you can take it anywhere you go to. Charges LiPo and LiFe, so that comes in handy.

V3+ Charger for LiPo/LiFe 2S/3S . Well nothing much to say pretty decent charger. It server purpose. You have led indicator for charging and charged battery. It's really small and compact, doesn't heat up when charging batteries.

Bought one and used it for charging the "Battery Li-Po 1450mAh 7.4V 20C".
Works like it should be.
When the battery is charged it will show a green light. charging won't costs that long of a time and it's balanced.
Price/quality is worth it!

A bit on the heavy side but that is surly not for the bad aspect!

The wepon is really sturdy and works really well! Especially with the tune up service that is provided here by TG, the weapon itself uses very accurate m5 bolt locks for the rail system that allows you to attach whatever you want to it! I used it to attach a bipod directly to the bottom of the rail and used the picatiny rail included to run a fore grip!

Do recommend it and fun thing to run around with! A good eye catcher if anything else!

I bought one of them. Simple and fit for purpose, this is my first charger. I'm charging him a 1450 battery. It will charge in about an hour. I haven't noticed any bugs yet. If it lasts a long time, I’ll definitely buy one or even more of it.