[Set] CM.056M Full Steel AK replica Eshooter ETU [CYMA] + 150rd Mid-Cap Magazine for AK47/AKM - Black [BattleAxe]

Das 150-Schuss Mid-Cap Magazin von BattleAxe für AK47/AKM-Repliken hat mich positiv überrascht und überzeugt durch seine zuverlässige Funktion sowie sein hervorragendes Preis-Leistungs-Verhältnis. Das Magazin macht einen stabilen Eindruck, ist sauber verarbeitet und passt optisch perfekt zu AK-Plattformen.

In meiner AK-Replik sitzt das Magazin sicher und fest, ohne störendes Wackeln. Das Einsetzen und Entnehmen funktioniert problemlos und die Verriegelung greift zuverlässig. Besonders wichtig ist für mich die BB-Zuführung, und hier gibt es absolut nichts zu beanstanden. Die Kugeln werden konstant und zuverlässig bis zur letzten BB gefördert, selbst bei schnellen Feuerstößen mit einem 11,1V LiPo-Akku.

Mit einer Kapazität von 150 Schuss bietet das Magazin einen sehr guten Kompromiss zwischen ausreichend Munition und den Vorteilen eines Mid-Cap-Magazins. Es gibt kein störendes Klappern wie bei High-Caps, was gerade bei taktischen Spielen oder MilSim-Szenarien ein großer Vorteil ist. Gleichzeitig muss man nicht ständig nachladen.

Die Verarbeitung wirkt robust und langlebig. Auch nach mehreren Spieltagen zeigen sich keine Schwächen an Feder, Gehäuse oder Verriegelung. Das Magazin hält den normalen Belastungen auf dem Spielfeld problemlos stand und vermittelt Vertrauen in seine Zuverlässigkeit.

Besonders für Spieler, die mehrere Magazine für längere Spieltage benötigen, sind diese BattleAxe-Magazine eine ausgezeichnete Wahl. Sie bieten eine zuverlässige Performance zu einem sehr fairen Preis und funktionieren in meinen AK-Repliken ohne jegliche Probleme.

Insgesamt ein hochwertiges und zuverlässiges Mid-Cap-Magazin mit guter Kapazität, stabiler Verarbeitung und störungsfreier Funktion. Ich würde es jederzeit wieder kaufen und kann es AK-Spielern uneingeschränkt empfehlen. ⭐⭐⭐⭐⭐

For the price, these magazines are perfect. The construction is not steel, but they are really sturdy. When playing i dropped them multiple times on rocks, dirt, etc. and they showed no damage. They never missfed on me, the only time one jammed is when a small stick got stuck in the BB follower but that is to be expected.

A few notes:
-They come dry, so there is no grease inside the BB path and on the spring
-The AK magazine lip is made of polymer, it is sturdy
-To dissasemble you just have to push the small pin in the lip out of there, take the lip out and pull the plastic internals out. The internals are classic airsoft mag internals
-They fit perfectly in the Double Bell "RK-AIMS" (the folding stock, dong grip romanian AK), giving a satisfying click and they are not moving when in.


Overall, these mags are really nice value, especially if you catch them on sale like i did, 8 magazines for 32€. Really happy with the product.

Very well made and solid gun, feels good in the hands and is very good looking. Shoots very precisely and fast. Is easy to operate and maintain. Internal machinery is very precise and made of quality materials. Only problems I saw vere slight machining problems to the inside of the wooden stock but it is to be expected for this price. There was also slightly torn wire insulator inside(I'm guessing from assembly in the fatory). But all in all very good gun recomend!

The CM.056M model is of high quality, with good internal components in the price/quality ratio. As a person who is an enthusiast for weapons of the AK-47/74/AKM type and other variations like me, I was very much looking forward to the weapon, especially the platinum version from the Cyma company, where this series is famous for its quality workmanship in the price/quality ratio. This is my first airsoft gun of better quality, so I was looking forward to the weapon even more. Unfortunately, I have a few reservations about it.

I probably got a defective piece, because the cable at the gearbox was significantly damaged when inserted into the body of the weapon (signs of brute force when inserted into the body of the weapon, I was suprised that the cabel was not cut in half lol) and it was immediately visible that instead of moving the cable a centimeter to the side, the worker clearly did not think much about it and inserted it there as its condition correspond to it; frayed wiring, fortunately I managed to carefully remove it from body of the weapon and tape it with insulating electrical tape and put it back carefully. So far it works without problems.
I also discovered that the wrong screw was inserted (it was 6mm shorter, so it couldn't attach to the thread at all) for the gun grip, which is attached to the thread on the motor, which is not a defect at all, but just a minor inconvenience that can be solved by buying a new M4x16mm hexagon screw.
Furthermore, the spring was missing from the pin on the sight that holds the muzzle break to the gun, which I personally don't mind, since I used a different muzzle break anyway, but again it was another inconvenience that shouldn't happen with a gun for 340€ (I would understand it with an airsoft gun at a completely different price range, but not here).
Finally, I discovered that the wooden stock has a crack in the area for the screw, most likely someone from the factory tightened it too much or it is another manufacturing defect.

Also when purchasing this weapon, the description stated (and recommended) a T-stick type of battery (however, a Mini-block type battery will fit properly in the stock), which yes, can be used here without any problems, unfortunately you will have to rewire the cable from the stock and route it through the grip space to the the space under the dust cover. It will require patience and a bit of nerve, but it can be done without any problems.

Shipping and dispatch of the order was completely without any problems and very fast - I received the shipment within 2 days. I really appreciate that, because often even from a local e-shop the shipment does not arrive in such a short time. The packaging was also perfect, thumbs up.

Overall, I really appreciate and praise the speed of dispatch, shipping and overall approach. Unfortunately, I received the model that I received. I would definitely not recommend it for new and inexperienced players or people who are not very technically capable of handling and repairing things (disassembling the entire AK was quite a challenge for me, especially the pins themselves, which were quite tight, but Uncle Hammer and a Uncle Screwdriver managed it), I would recommend another weapon to them. Otherwise, I am thrilled with the design, whether it's the wooden parts, the all-metal weapon or interna parts in gearbox.
I give 4 stars instead of 3 stars that I wanted to give because I love AKs and I hope I was only one who had those mentioned problems with the gun.

After a long wait, it is finally here. When the cyma platinum cm.056m came out I bought it right away and I am very satisfied with my purchase.

Ordering:
Ordering was easy and fast. Through the “Recommended accessories” I could easily order the corresponding magazines, batteries, etc. The only downside is that the 1000mAh 11.1v Li-Po battery recommended does not fit the stock. Also, when ordering, make sure you order this replica with the correct FPS.

Delivery:
Same day the package was shipped within 2 days I had it inside. The package is packed so well that it did not get damaged in its journey to me (Netherlands), and we all know how package deliverers handle packages.

Price and Quality:
The price is on the high side, but you get a decent replica in return. The replica is of high quality. I have yet to find a part that is lower quality than the rest. The muzzle on the front can easily be taken off to attach a 14mm tracer unit to it. The points to connect a sling are also sturdy.

conclusion:
For the airsofter who is looking for a good AKM and could spare the money I would recommend the Cyma Platinum CM.056M. The replica is of good quality and is delivered quickly.

Caricatore Mid-Cap da 150 colpi per AK47/AKM - Nero. Robust, practical. excellent spring. already tested in the field. right ability. ready for the next games. my gaming friends also tried it and were satisfied

Good looking steel mags for AK. I had problems with them on cyma AK because they get blocked inside and stuck when you try to release them. I had to sand paper them and cut some plastic from the bottom to make them work. Now they are fine.

I tested them on cm 048su and cm 045 and on both of them had some compatibility problems.