[Set] CM.045A HIGH-SPEED [CYMA] + AKS-74U Receiver Cover Rail [CYMA] + Airsoft VZ-1 Style Russian Red Dot Sight [JJ Airsoft]

Moin, hab das Dustcover letzten Monat bestellt. Lieferung ging super schnell. Hat auf den ersten Blick direkt einen hochwertigen Eindruck gemacht. Passgenauigkeit ist überragend. Jetzt ist ist das Dustcover wesentlich hochwertiger als meine AK selbst. Also ich kann dieses Teil nur wärmstens empfehlen.

Più che soddisfatto, il pezzo si cambia in 4-5 minuti e si adatta perfettamente ad un cyma platinum CM.055 permettendo di montare un dot avendo accesso diretto al vano batteria

A great solid red dot for your russian style airsoft replica.
Also props to the service team of taiwangun for the great support.
I received a defect on arrival red dot and they coverd all the shipping costs and deliverd me a replacement one.

Nice weapon, good quality, real wood and thick metal, it's ok, taiwan doesn't send lemons like some other vendors do. As an AK fan, this was totally worth it, when I'll get more money I will probaybuy the 104 Platinum also, looks soookoo sick

This is a great value rifle. The wood stain was not as bright orange as i had expected from the photo (a plus for me!), and the build quality is over all quite good.

My only issue is that the dovetail mount does not seem to be reliably square to the gun and as a result, the typical cyma side mounted optic rail does not align well with the barrel. Best to stick with the rear sight mounted rail, which works perfectly.

For the price, the build quality and performance is excellent.

The CYMA CM.045A is one of a few budget replicas of the AKS74u and is based upon the VFC AKS74u: is almost full steel and real wood.
It looks sturdy and almost with no wobbling at all, wood quality isn't the best but is ok for the price.
It shoots fast and is quite snappy with a 11.1v lipo, and I am pretty sure that with an active brake mosfet is gonna be snappier and less power consuming.
It keeps good accuracy at 35-40 meters making it a proper cqb-mid range airsoft rifle, and for this price you can't beat it. Recommended.

Works fine on CYMA AKs74u (CM035).
I've replaced the OEM pin with an M3 screw.
No wobbling even with a heavier optics.
Pro for me is the iron sight replacement, not so accurate, you get too much free space between the front and the rear sight, but on CQB it's fair.

Fits WE AKS-74U , but is a bit too wide. Get a vice and press it together.

Does come with a pin out of rolled metal, for fitting into trunion. Screws on the inner side of the dust cover might need tightening to eliminate RIS rail wobble.

A must upgrade for the aks 74, the original broke so the replacement was an upgrade, fitted a red dot on it and it works perfectly. comes with hardware and it is a quick easy replacement. very good quality!

Very useful product if You are an AK user, It's long enough to receive 3-9x scope. I'm perfectly satisfied with it. Perfect price-value ratio. The package contains the axle too, very easy to install it.

A must have for any AKS-74U setup, as it is far more practical in my experience compared to a side rail, as you can access the battery space without needing to remove any parts. I highly suggest getting the shop to install the rail, as without the proper tooling i ended up scratching up my pin location. The installation is worth the money, compared to the headache and time wasted doing it yourself (which i did with a hammer and screwdrivers). Looks great, feels secure. A must-buy.

This is a solid red-dot made out of aluminium and clear glass. It's got enought brightness to be seen during the day. You can zero it in, and it'll hold zero just fine. Perfect for two eye shooting and staying true to your Russian bias larp. The sight comes mounted on a high mount so you can still use the AK iron-sights. But you can also remove the stilts inbetween for a low mount. It might be a little hard to aim the MOA2 size dot, but you'll learn to aim with it.


(If the red-dot blinks before turning off, your battery is dead.)

This thing shoots great! It’s fast it’s accurate and very versatile. The compactness of the design means you’ll be able to fit it in any bag, and the High speed gearbox allows you to fire extremely fast, even in semi-auto!

One of the best rails for the top of an ak, fit snug but is still able to fold up.

Different sized roll pins however so don't lose the one with the packaging.

If you're looking for a lot of rail space this isnt the best, you can only fit 1 red dot or sight on it, no magnifiers or holo combos unfortunately

This optic is solid and very durable. It has several additional parts just like honey comb kill flash and protective caps with different styles.
The brightness of the red dot is visible even during daylight and it is easy to adjust it's brightness with the buttons.
It has a weight but you receive an aluminium mad red dot which in this case is a guarantee of quality. 10/10

Bought 2 of this in pair. One working just fine other one had some problems with plus and minus buttons. But support from taiwangun was good and they responded in time. Other one works fine and holds zero after 2 games of active playstyle. Worth it in my opinion quality is very good and using aaa batteries which are very common.

ASG fedele alla controparte reale, ottime scocche nessun gioco nel calcio. Gearbox ottimo con componenti di qualità 24bbs ottima reattività da migliorare il gommino hop up. Perfetta per boschivo ma anche nel cqb. Veramente una bella ASG solida, affidabile e modulabile.

Tökéletesen illeszkedik a modellre (CM.045a)
mindenféle gond nélkül telepíthető ami kb 10 percet vessz igénybe. Személy szerint örültem volna ha ugyan olyan irányzékot kap mint az eredeti de ez is megfelel.

Ak74 acessório top cover em alumínio/metal que encaixa perfeitamente em ak74u da Jing Gong com ebb. Material leve e de boa qualidade de construção que permite colocação de acessórios e miras tornando a arma mais tática. Bom upgrade para quem gosta de personalizar as réplicas

Nicely made, sturdy replica, much better than the cheap Chinese T1 copies, it comes with a raiser, killflash, clear lens protector and standard lens protector. The only downside is the missing instructions, it is not obvious which button does what. It seems it can be switched off by pressing the + and - buttons together.

Sturdy build and overall good quality but I don't like how attaching the honeycomb is permanent. Wish there was a way to remove it without damaging the ring. I also don't like that it relies on the 60 minute turn off instead of also having a normal off button.

It's totally fit on my Cyma 0.45, and it's working perfectly. It was not too hard to fit on my rifle, and it's look awsome now on my AK 74U. The material is strong, it's very good in quality! I will suggest this product everyone who want a nice sight/scope on his AK rifle. Easy to change it, good material, fit perfectly! Totally worth to buy it!

Excellent product! even if there's no ETU this aeg is SNAPPY! even got Italy standards! real wood forniture and steel. internally something I've never seen. The only downside is the folding stock button literally broken after one use ;(

Wonderful compact red dot!
The dot is sharp, no problem with outdoor playing.
Almost too many settings.
The QD mount did not fit my lct rail. So had to modify the rail a bit.
Works great on my AKMSU now after the rail is modified.
Comes with many accessories.
Would buy again!

Bought this for my cm.045A, and it fits great! It was a bit difficult to get on at first if you’ve never done it before, but it holds great! The material is very nice. I recommend getting this instead of a side mount, due to the fact that
1. You have to take the side mount off every time to change the battery
And
2. The stock will not be able to fold with a side mount.
My optic fits great on it as well! (Victoptics rds)

Perfect on cm.045. Enough easy to mount. The bolt is longer that the one of replica but works perfect

Very fast the spedition. In less a week I had the package

It's quite too much 200 chars for a piece review. Maybe 100 were enough.

Fits my CYMA CM.045 very well. It has a slight gap at the front, but that might be an advantage if you plan to put wire through it for other gear and setup. Affordable price too. You need a hammer and a punch to punch out the pin. Fittin the pin back might needs some force due to the spring pressure of the upper handguard retainer.

Fits the cm.045a snuggly. A friend tried it on his and it fits too, we aren't sure of the moddel but it isn't a cyma, so it may be compatible with a lot of ak's.
It does make it slightly less convenient to change a battery while having a scope mounted, but it doesn't inconvenience you in the least while out in the field.
A side mount can be usually be installed on ak's and fitted perfectly by screwing it on, and this is meant to replace it. It doesn't really wobble, although my red dot is pretty small and light. Any wobble can be ultimately eliminated by putting in small cuts of paper.
Also, it's made of the same material as the original cover, it seems to be some sort of aluminium. Whatever it is, it's solid enough for airsoft.
Pretty great product.

Rail came in fast. When unpacking I was positively surprised of the finish and robust construction. Mounting took aproximately 5 minutes. After closing it tbere was absolutely no wobble of any kind!!
Real good buy, especially when playing CQB. This rail allows you to play stock folded.

Good quality dust cover, sturdy and solid.
Includes a rear sight block pin.
Does require slight modification, if you want to fit it to your E&L AKS74U:
You will have to slightly adjust the angle of the recess on your dust cover to be able to put your fire selector in safe position. Metal file or a dremel tool works fine for that.
Also the original e&l rear sight pin will not fit anymore as it is too short. Using the included pin works fine however.
The rear sight is shorter than the original, so you will be able to mount optics a few centimeters further up the dust cover for a longer eye relief.

The first time i held it, i was suprised how heavy it was, it's really high quality, and it fits perfectly on my cyma ak74u, and it also fits my e&l ak74u.
Excelent product, can't reccomend highly enough if you are building a tactical ak74u.

the aks I have is a a cm045-UN; there's a small gap at the junction and the pin needs to be squeezed with pliers to fit the ring. other than that, stable and sturdy.
and looks really well on the replica

This gun is very well made, build quality 5/5 it even feels like the real deal with a little wobbel at the stock and the muzzel :)
It shoots pretty straight with 0.28 grams and aproxy 40-50meters easy hitting a human sized target.
Its sounds so good, its so silent with a real silencer on.

Really good quality and much better looking than most optic mounts for AKS74U replicas.
Big must have if you dont like the dovetail mounts.

+ Material feels nice and firm

+ still very light

+ more battery space

Really no Cons!

Nice part, perfect fit and great quality. Fits my cyma 74u with no issues.
No wobble, I have no worries about putting my vortex 3x spitfire optic on it or any other optic for that matter. Really solid build and great addition.

Ak74 Cyma ottima replica, buoni materiali, fatta bene, tutta in metallo e legno. Spara bene ed ha un realismo davvero impressionante. Pesa il giusto e non da fastidio durante il gioco.
Taiwangun, come sempre professionali, precisi e con spedizioni sempre precise e veloci. Ottimo professionisti.
Che dire, negozio di SoftAir più che ottimo.

Does what it is supposed to do.
It fits my CYMA CM045A perfectly, doesn't wobble at all.
it is however a bit more heavy, especially with an optic, so that the dust cover doesn't spring op as easily.
that isn't really a problem though, just a tiny little bit anoying when changing batteries.

Fantastic item, I customized my WE Ak74UN a lot and many parts had to be filed or modified etc. This was one of the few bits that worked great out of the box, a bit of hammering in the rod and that's it, mounted, I thouroughly recommend this cover. It also looks great with the matte black finish.

Works great. Bought it to swap the stock one on the 045C, so I could fold the stock and have an optic at the same time (side mount would get in the way). Installation was easy, hammer the old pin out (it comes with a new one), swap the dust cover making sure you reinstall the pin and spring which holds the top gas tube cover, finally hammer the new pin in.