[Set] CM.009C MOSFET EDITION [CYMA] + 80-round Short Steel Magazine for AR-15/M4 - Battle Worn [A&K]

Diese Magazine sitzen schön stramm in meiner VFC Avalon Gladius HPA und feeden sehr gut (auch mit 0.36 BB's )
Sie sind vom Material anscheinend sehr robust und fassen sich sehr gut an.
Alles in einem ein für den Preis ein schönes Magazin. Bin auf die Feder auf Dauer bei dem kugelgewicht gespannt, bislang hatte ich erst einen Spieltag mit ihnen.
Ich hoffe meine Bewertung hilft euch weiter:)

Sehr schönes Modell ich werde jedoch den Handguard mit einem echten austauschen weil dieser hier etwas wackelt und einfaches Plastik ist. Körper ist aus Metall leider ohne irgendwelche Nummern oder Colt Logo an der Seite. Mosfet gleich dabei, Abzug ist mit 11.2V Lipo knackig. Habe sie gekauft um sie an die Wand zu hängen und sie daher nicht aufgemacht. 1 Stern Abzu nur deswegen weil keine Logos etc drauf sind, das würde ihr etwas mehr Realismus verleihen.

the magazine is ideal for dmr as it's short but doesn't compromise in bb capacity. I used it on a shotgun with an adapter, so its size was perfect. Stell built and all black, looks elegant on a cyma shotgun. Lubed it on first use and it hasn't ever jammed. Paint work doesn't scratch off easily, I'm very happy with it, especially at this great price!

Decent looking and working properly with the E&C XM16E1. No feeding issues and the price is great as well. Design is good and sturdy. No rattling noises and fits good in my AEG. As this is still the Vietnam style short magazine which are hard to find so very pleased with it. Color is a very dark gray instead of black but that suits my replica nicely.

1st I want to speak on the shipping. I live in the US. I ordered 6 mags late Sunday and had these at my door by Friday!!! Only 5 days from Poland to my house! Yes shipping is high, but considering where it’s coming from, I’m okay with that. I bought these short VN style mags for a Krytac MK2 Trident SPRM. At 1st I couldn’t get the mags to lock into place. I separated the upper and lower receiver to get a visual. I couldn’t find anything wrong, all measurements between these mags and a shorty Ares mag were the same. I was about to start modifying the mags to make them work. I wanted to double check before I risked destroying my very expensive mags. Turns out that they just needed some silicone oil to lube up the spring and little moving slide. These mags look amazing in my Krytac. It definitely has the DMR look. I highly recommend TaiwanGun and these mags. I’ll definitely continue doing business here.

Great gun. really accurate out of the box solid power the plastic is pretty solid no issues doesnt rattle or move so it has a great fit. only downside is the stock as its hollow meaning you need to add some sort of insulation otherwise when you run or walk the battery inside moves around making noise but other than that great beginner gun and its VN so looks very cool

Cyma Best brand in my opinion.
Straight out of the box
They shoot like a charm.
Great brand no matter the model I have multiple Cyma.s now and they perform great.
Plus the kerstel basic mosfet option is in my opinion a great option. They build it in straight away. And If your not technical then spend that extra smal amount of money and use the great reshim or mosfet upgrade it’s a service to my experience no other resellers in Europe give. So hats of to Taiwan gun

Update... So with only 1 high cap through the replica it decided to stop functioning. Every time a battery was plugged in it would chime an alarm repetitively and would not fire. Tried multiple battieries, lipos, nimh, 7.2, 9.6, 11.1 all fully charged and nothing changed. I took it to my local tech since its not worth it to ship it back internationally. And what we saw was abysmal....

First off the quality control of this particular replica is utter garbage. The signal wire for the mosfet was shredded by the motor causing a short. The gearbox casing has a lot of sharp edges like they just did the bare minimal work and pushed forward. There are metal shavings everywhere. Between the gears, in and on the piston, inside the cylinder and on the piston head/ o-rings. Even disassembling the stock showed a large amount of shavings in the stock/ quick change spring guide.

Needless to say after this episode and awaiting my final bill for repairs. I'm going to be staying away from Cyma's for a while

Ok I love everything about this replica except the handguards. They feel cheap, like they're a good knock or drop away from breaking. They haven't but its just something to keep in mind. But the flip side is that is technically true to the original m16... the real version felt like a toy so.. accurate representation I guess.

Performance wise thing is hands down one of the smoothest shooting replicas out of the box. The motor adjustment needed just a hair of a turn but after that nothing but quick snappy shots. Trigger response is amazing with an 11.1v and the rotory hop up is a nice upgrade.

I love this version of the M16. It is a classic beast. And goes good with my Nam loadout. Shoots out of the box with tune up service from Taiwangun very well and accurate. The only thing is you need a flathead screw driver to get too the battery compartment in the stock. But that is about it. Tomorow my first skirm with it can't wait.

A very authentic replica! Only the markings are missing from the reservoirs. D-type stock, half fence, 3 prong flash hider.
Mosfet, t-deans.
It is very difficult to insert the battery into the stock.

Iron plate ment as a bolt wasnt asembled correct, i caused issues when releasig it

My first weapon i really like it!
I can only recommend it to beginners!
So far, I can't say anything negative about the gun, it does its job properly.At first I was a little afraid of the Cyma brand, but there are no problems with it, I am satisfied with it.

Good gun for the price! I did not try the original battery! I replaced it with a 7.4v 4000mha lipo battery from a drone! I had to make an adopter for the xt60 connection! The only complaint is about the screw in the stock for the cap, I made some small improvements and now everything is fine! I am very satisfied with the purchase! If you are looking for a good budget gun then this really fits the bill!

Great looking, good shooting replica, straight out of the box. Replacement of the battery is slightly cumbersome but other than that definately worth it's price. Too bad no proper bipod is available for it to complete it's looks

Very nice replica of the real M16A1, in my opinion the stock charger and battery are decent and can be used regularly. The weapon out of the box is already accurate and feels nice to handle, and the trident handguard gives you a nice grip.

Very impressed with this replica! It's an accurate representation of the prototype version of the M16A1, the XM16E1. A very decent mid-range replica with a lot of potential to be excellent when performing just one modification. The colors are quite accurate and the build quality is good, apart from the slightly wobbly handguard.

Performance out of the box is great, with very high-quality internals. The MOSFET is basic, but gets the job done. There are no programmable functions, and I haven't noticed a brake function during use, but it does give the peace of mind of not having a mechanical semi cut-off, and there are no trigger contacts that can get carbon build up.

There's a nice quality metal hop-unit, and a very smooth barrel that only needs to be cleaned a bit when it first arrives. Gears are tough, and the cylinder and piston appear to be nice quality.

Literally the only thing that I would recommend upgrading is the hop-rubber. The standard rubber is a rather nasty looking rubber with a two-pronged contact surface, which had a rough finish on one prong but a smooth finish on the other. I changed this out to a Prometheus purple rubber and the range and accuracy are now stellar, easily up there with guns that are twice the price.

There's just three small issues I have with this gun that I would like to see CYMA change in the future. These are not game-breakers by any means, instead just minor complaints on an otherwise extremely high-quality product. The first I already mentioned, which is the rather nasty hop-rubber. This is a very cheap fix that can lift this gun from mid-range to top-range. The second thing I would like to see changed is the front handguard assembly. It can rotate a bit side to side which makes it feel a bit cheap, and the metal handguard cap at the front is too small to allow you to mount the M203 grenade launcher handguard, so you'll need to replace this part if you want to change the handguard to a different one. The third thing is not really a quality issue, but I would have liked to see some engraved Colt markings on the receiver, this would have made it perfect externally.

All in all I still give this gun 5 out of 5 stars because it performs way above what you pay for. The value for money is great on this replica. Just order yourself a Prometheus purple or a G&G green rubber and you don't need anything else to have a very reliable replica.

(note: I asked Taiwangun to replace the spring on mine with a 360fps one and mine came in at 357fps at 0.20g rather consistently, so great job there. For ingame use I would recommend 0.30g, especilly after changing the rubber)

Ordered one last year for a Vietnam war style gear and I have to say, this is great AEG! Bought mine with the additional tuning service so I can't tell how does it perform in off-the-shelf condition, but I am fully satisfied. Also applied a LiPo battery but it really runs well with the stock one too.

I can only recomend this!

Only a minor issue is that inserting the battery (and sealing the stock slot) requires a little practice.

Ordered one last year for a Vietnam war style gear and I have to say, this is great AEG! Bought mine with the additional tuning service so I can't tell how does it perform in off-the-shelf condition, but I am fully satisfied. Also applied a LiPo battery but it really runs well with the stock one too.

I can only recomend this!

Only a minor issue is that inserting the battery (and sealing the stock slot) requires a little practice.