[Set] AT-AK12U Mosfet Enhanced [Arcturus] + Airsoft DK-9 Style Russian Red Dot Sight for AK [JJ Airsoft]

High quality Replica!

Arcturus never disapointed me, in my eyey they make the best and most affordable Replicas. shoots lasers. Quality material..

U can`t go wrong with Arcturus, just be sure to grab one of them PE models. Mosfet enhanced versions do not have LiPo alarms etc.

Russian Style Red Dot at a good price. Easy to set up and very good workmanship. A must have for every AK player. Battery is included.
The Dot does not have strong phantom effects.
Really cool piece for the price!
Would recommend to anyone who wants to give their AK a real look.

This DK-9 style red dot really performs well in airsoft! It’s easy to mount, stays steady, and gives you a clear view of the target. The lens protector is a handy addition, and the battery lasts longer than you’d expect. If you’ve got an AK replica, it’s definitely worth trying out – a lot of people praise it, and for good reason.

It's sturdy enough, being built out of metal and quite heavy, but:
- dot intensity is quite low. During day time I have to set it to penultimate or even ultimate position;
- dot can't be adjusted too much. For example, horizontally I maxed it out to right, but it's still off by a few meters from target center;
- drains battery really fast. During winter time, a battery lasts 2-3 game days.

I can say its one of best replica out of box. Excellent performance, great quality and also resistant materials. I icked 340 fps version becouse i m usin it for CQB. I had paper with qc from taiwangun with numbers from chrono and comparing to our chrono it was accurate so i can also say they will controll it 100% so you to t need to be scared order from there bur back to rifle: it have +-1J with 0.28 which is around 340fps, accuracy and range are excelent, trigger response is excellent and it have great performace. Lot of people complaining about place for battery. I m usin 7.4V 1200 and have no problems. Battery fits excellent. ME have 4 positions on fire selector… burst position will ahot on full auto and for semi you have to put sellector all the way down like on real ak-12… it fits perfectly in hand, Magazines feeds perfectly, other brands of magazines fits and feeds well too. Replica have no wobble if i don t mind telescopic stock but since its telescopic stock, on this place is little space for mooving allowed

Where do I begin? This replica is more than just amazing. When I bought it, I also purchased the suggested batteries and a charger, as recommended in the product description by the team at Taiwangun. It's important to follow these suggestions if you want to maintain your warranty and keep your replica in good working order! :)

This model (U) features a larger trigger guard and a different stock, both of which I am fond of. The stock on this model is extendable, offering up to 6 different positions.

Inserting the battery taught me that a rubber hammer is quite handy with AKs; it helps in disassembling the necessary parts. Don't hesitate to apply some force when disassembling, but be sure to watch a step-by-step YouTube tutorial first for guidance. Reassembling can be tricky, especially aligning the dust cover and inserting the lever that holds it together. I used a rubber hammer for both removing and reinserting this lever.

Regarding red dots, it's best not to go too high and to be mindful of the height over bore.

This replica DOES HAVE a 14mm ccw thread. Although it's quite short, it still accommodates muzzle attachments. To access the thread, remove a pin from the AK-style brake, twist it, and unscrew.

There's a front loop for a sling and a hole on the stock for a QD sling insert.

Magazine-wise, I opted for the Arcturus AK12 mags (real-mid cap), which fit perfectly. These mags have a small pin at the lip that needs to be pushed out for capacity adjustment. I've heard that non-U versions can use LCT mags, but I haven’t tested them with this replica.

This replica comes with both a mid-real cap magazine and a high cap magazine.

The weight of the replica is noticeable, especially with added armaments.

As a first-time AK replica owner, I couldn't be happier with my purchase.

Now, the biggest question: Should you buy the PE version? If you have the budget, go for it. However, as someone relatively new to this sport, I found this version to be more than satisfactory in every aspect needed.

Remember to be mindful of your local field rules! You can choose from 3 FPS options when purchasing, and this replica has a strong Joule output!

I got this baby. 1.42 Jouls from the box. No need to do anything with it - just unbox and play. Eat well 0.3g balls, works fine with some cyma/LCT mags for AK. !!!NO 2 ROUNDS BURST!!! - safe/burst/single only, switch have position and mark for 2round burst but it act as full auto actually.

As an Ak lover, externally the rifle is solid and sturdy, it feels great to handle. The only thing that wobbles a tiny bit is the stock but it is to be expected on folding stocks, other than that I really like it especially the rubber on the back.

It has a new type of rear iron sight which I really dig, but be aware of the fact that you will need to hammer it in place. Just put something soft between the hammer and the sight so you dont scratch it.

The fire selector is really hard at first but it softens with use. (it doesnt have a 2 round burst like the PE version but honestly i dont need it at all)

The trigger is straighter than traditional Ak triggers and I prefer it. It has a spring release near it which is definitely a plus. It also has a really easy to use spring change system.

The new dust cover is sturdy and doesnt move unlike older types of Aks but it takes a bit more time to disasseble and riassemble. The battery space under it is very tight and I strongly reccomend stick type batteries which fit perfectly.

It has a new rotary hop-up chamber that is WAY better than the old slide hop-up chambers that Ak's have. It's very easy to take a shot and precisely adjust the hop-up as you like.
It's compatible with all of the ak mags I have tried and they all feed the bbs well.
I have only tried it with 7.4V lipos and it has a good trigger response and a slow fire rate around 12bbs a second.
The rifle is fairly precise at 40 meters with 0.25 bbs and 320fps. Certainly not dissappointed.
Overall I really love this rifle and I definitely reccomend it you want a great Ak12 replica.

Sturdy build with a included killflash makes this a great addition no matter your loadout.
The dot is clear and helps aiming with no major adjustment needed right out of the box. It flips clock-wise between different brightnesses but can also flip to full brightness from "OFF" instantly if you flip it counter-clockwise. Helpful for those tight situations where you don't want to fidget with the settings.
Beware that it will not fit properly on uneven RIS such as the CYMA AK-mount (FBP0372) due to it being fastened with two screws. Make sure it is even 22mm.

+ looks great
+ Can use a rechargeable AA battery
+ Comes with a kill flash
+ Very sturdy build, with the metal construction

- bit on the heavy side

Note that was a little bit bigger than I expected