[Set] ASK204P Tactical EBB Full-Metal [APS] + Railed Scope Mount for AK - Black [M-ETAL]

used it on my cyma cm.053 and it fits perfectly with some tightening. the material is sturdy and the paint finish is very clean it fits flat against the receiver unlike most of these dovetail mounts the tightening screw is in a kind of weird spot so i had some trouble tightening it but it didn't move and inch after i put it on.

Great value for money! The gun is well built and full metal gives it a nice look and feel. It shoots very good too and has a real ak47 feel! The gun comes with a barrel cleaner rod. The battery needed is inexpensive. All with all a great package under 200 euro

The mount is made out of incredible alloy. It's really robust and well built. Easily adjustable and there aren't any disparities causing it to be leaning to one side or causing the scope/red dot to not attach firmly.

Only complaint is that the mechanism for snapping it into place is a little wonky.

Overall - great product.

Excellent. Had it for about a year and a half, still rocks just as new. No problems at all. Works pretty well with 11.1 volt batteries too. I would recommend it. Only the stock is a bit wobbly but it's wobbly on real kalashnikovs too.

Purchased as a backup rifle, mostly as i was interested in purchasing an AK variant and against all negative reviews i have read for APS.
It is a mostly metal made replica, with a very few parts made of plastic, like the grip etc.
v3 gearbox is good, spring is 120m/s but it does not deliver what promised (>400 fps). My measures where around 361-375 which are not bad to be honest.
For the specific replica, i am using this battery: Battery Li-Po 1200mAh 7,4V 20C [IPower].
Shooting is stable and i managed to shoot around 1200 shots before out of power, which is good as it seems that the energy efficiency is good on the model.

For sure i will check on some upgrades in the near future, mainly rails and mounts because i cannot use my current optics or peripherals with it.

Railed Scope Mount for AK - Black [M-ETAL]
Once you have the screw adjusted it fits very snugly to the mount. I have a red dot sight and a Perspex sight protector. There is ample rail space if you wanted to fit a full-on telescopic sight onto it. The cam lever is a little on the small side, but it does its job, and the lock prevents it from falling off into the mud!

Very good product. Feels sturdy and good build quality, full metal.
Fits perfectly on an ak47.

Does not fit on an ak74u unless you do some modifications on the dust cover, because it will hit the standard iron sight.

Great steel product, easy to use. Even for the beginner airsofters! Gives this awesome old school look on my ak74 replica great combination with a holo sight mod! Product is full metal, feels sturdy and strong. Not gonna break on you easily!

It is a really nice product to use for AK sight mounting. I use it on the AK Carbine AT-AK01, it is slight offset barrel and top itself, but ive just adjusted the sight that i use on this rifle to hit the correct target.
The construction is of metal and both looks and feels great.

Screw needs to be tightened to use it, be very precise here. It has to be pushed out so it can be turned, there is a very small sweet spot to make the lever optimally tight (as in, one single side of the hexagonal screw more or less is loose). Once set up, it works perfectly well on an AK with the appropriate mount.

Most waluble my gun! Works like clock "click clack " :-D After replace pistol grip to more ergonomical, change bottom cover to versio with rails and instal mosfet arsx :-) recever stand aleays in wright position thanks to asrx :-)

Perfect starting and axpert choise :-)

Most waluble my gun! Works like clock "click clack " :-D After replace pistol grip to more ergonomical, change bottom cover to versio with rails and instal mosfet arsx :-) recever stand aleays in wright position thanks to asrx :-)

Perfect starting and axpert choise :-)

This replica is amazing. Every component on it is made very well. It has good sturdy construction.
Fires flawlessly. It definitely exceeded expectations. I expect to use it in many airsoft games to come. Highly recommended

As soon as I received the replica, I want to test it in a game since I was excited to play with it.

Most of the replica is made in metal, and is very faithful to the original weapon, (my father who was Spetsnaz held it and was impressed at how accurate it was!) only pieces in strong ABS are the pistol grip and handguard, which has several picatinny rails to add some accessories.

The bolt catch makes a very satisfying sound when you shoot with the replica thanks to the blowback, and so far playing with it, the replica had good accuracy with 20.g bbs.

I also bought two mid-cap 140rd battleaxe magazines which fitted just right in the replica without any problems, and I guess most of the AK74 magazines on taiwangun will fit.

The only issue I noticed is that the bolt wiggles a bit if you poke it, and I still didn't manage to take the muzzle off to add a suppressor, though this is really not much of an issue.

Overall, the replica is a full metal version of an AK74 with some tactical adds on, a strong and resistant replica, and I am greatly satisfied with it.

Excellent gun for the money, this was my first APS and I was amazed at the build for cost.
Recommended with upgraded flat hop bucking & nub and a 9.6v stick battery

-Metal body and Hop-up unit
-6.03 tight ore barrel with seals
-Fires a nice 328 - 340 out of the box
-Fits cyma parts
-Can had EBB on or off
-It's £100!

-Keep an eye on the stock retaining pin as it can come lose as it sits under the gun by the mag well (bit of tape to solve)

-Folding triangle stock welds are a bit dodgy so I re-enfoced it with superglue to avoid it coming loose, this way I can fold and unfold the stock with peice of mind.