Phantom Extremis Rifle MK6 SDU2.0 - Black [APS]

The Phantom Extremis SDU2.0 eSilver Edge rifle features an electronic 'Super Dynamic Micro Chip Unit' trigger with a built-in programmable Mosfet system that provides instant response to trigger pull.

There are five different modes available.
Press and hold the button, which is located on the outside of the gearbox, accessed via the magazine slot.
You will see a red LED light, hold until you see it flash 2 times - release the button to accept the changes. Repeat the action to continue changing modes.

• Mode 1 - Safe -Semi -Auto (default)
• Mode 2 - Safe -Semi -3xBurst
• Mode 3 - Safe -2xBurst -Auto
• Mode 4 - Safe -3xBurst -Auto
• Mode 5 - Safe -3xBurst -9xBurst

Pressing the button twice or disconnecting the battery at any time resets the ECU back to factory settings (mode 1)

The electronic chip is replaceable, repair is easy and friendly. The chip is programmed to protect the gearbox.
This eSilver Edge gearbox has been specifically designed for an electric trigger and has been reinforced at critical points - around the cylinder head and spring guide.
The piston has metal teeth and works with reinforced gears (The piston gear has a magnet that controls the electronic trigger).
The parts are TM-compatible, which means that individual components (apart from the piston pinion) can be replaced if required.

The eSilver Edge gearbox works perfectly with batteries from 7.4V to 12.5V - LiPo READY! Current is always a stable 11A at any voltage between 7.4V and 12.5V.
The low and stable current draw ensures slower battery discharge, and extends the life of the circuit.
Based on our tests, the trigger response time is just 0.02 sec. The short trigger stroke makes it incredibly fast.

Key features of the Phantom Extremis SDU2.0 eSilver Edge:

• Quick spring change function
• 6" Evolution Tech handguard with MLOCK system
• Advanced pistol grip
• Double-sided magazine latch release and double-sided fire mode switch
• Reloading handle on both sides
• Enlarged breech release
• Hybrid Sound Blaster compensator
• Folding CRS flask - 4-position telescopic flask that folds out automatically at the push of a button on the underside
• Battery compartment measuring 117x32x31mm, which fits most Li-Po batteries. The compartment is accessed from the top by removing the safety pin. All the above features make this compact carbine ideal for CQB operations.

Recommended products to replica:

• magazines: FBP2304, FBP2366
• batteries: Gens Ace 25C 1000mAh 3S1P 11.1V Airsoft LiPo Battery Gens ace G-Tech T-Plug, GEA152S25DGT, Gens Ace 25C 1000mAh 2S1P 7.4V Airsoft LiPo Battery Gens ace G-Tech T-Plug, AIRSOFT BATTERY 25C 800MAH 3S1P 11.1V LIPO GENS ACE G-TECH T-PLUG

NOTE! Please note that Battery and Charger are not included.

Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.