GR16 MOD5 AT-HT01-TN [Arcturus]

AT-HT01 is the new assault rifle of Arcturus producer that has already accustomed airsoft players to the reliability, accuracy, and durability of their replicas.

The main elements such as receivers, handguard, outer barrel and receiver extension were made of aluminum and light alloys. Smaller parts, including the flash hider, ambi magazine catch, ambi bolt catch, assist assembly, extension nut, pins and ambi end plate sling mount, as in the case of firearms were made of steel. The whole rifle is well fitted and protected against corrosion.

The reinforced gearbox with proven internal parts is the next advantage of this replica. Quick spring change system, bearing spring guide, bearing piston head, full steel teeth polycarbonate piston, steel gears mounted on 8mm steel bushing to be able to withstand the highest loads. The motor gear is mounted on ball bearings to ensure it can rotate freely at high speeds. In addition, the gearbox is equipped with a microswitch trigger, which, in combination with low-resistance wiring, works great with Li-Po batteries. The use of an electric trigger eliminates also the problem of burned out contacts and improves the response to the trigger. The replica also features a sealed teflon nozzle that works great with a metal rotary hop-up chamber and with a precision hardened steel barrel.

NOTE! The replica has a unique serial number!

The kit includes:

• GR16 MOD5 replica
• folding sights
• 30/130rds DMAG variable-capacity magazine

NOTE! We can downgrade to 330 fps (1 Joule) in price. Just write about it in order commentary.

Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.

The recommended battery with the highest safe voltage for this replica is -11.1V.
If you decide to reduce the power, be sure to not use batteries with a too high voltage - 9.6V NiMH is recommended, and in the case of Li-Po / Li-Ion - 7.4V.
Otherwise, the replica may be damaged, which will not be covered by warranty repair!
Remember that the warranty covers only replicas in which the spring was not replaced with a stronger one, and no batteries with a higher voltage than recommended were used.