CM.092LT-7 Lantac LA-SF15 PDW [EMG]

From 2012 LanTac USA are specializes in the design and manufacture of highest quality AR15 rifles and accessories such as the popular LanTac Dragon muzzle brake, all product are assembled by a skilled team of rifle builders.

A successful cooperation

The airsoft rifles from the CM.092LT series were born from the cooperation of two airsoft brands known all over the world. Cyma Platinum and EMG (Evike Manufacturing Group). Cyma for the quality production, innovation, and affordable price.
And EMG for their ideas and the fact that they want to bring new products to the airsoft market.

Fully licensed rifle

Licensed by Lantac, and manufactured in the LA-SF15 specification, from the best materials available on the market. A huge importance has been given to the LanTac trademarks which are stamped deep on both sides of the lower receiver.
We also can find a licensed LanTac Dragon muzzle brake, USR-marked upper receiver, and a unique serial number, ale these characteristics give an authentic appearance to this airsoft rifle.

High level of production

The CM.092LT airsoft rifle is produced to a high standard, with particular attention to the components used. Due to a full metal construction, we can note a light weight of just 2.5 kg, ultra-slim CNC machined aluminum 7 inches MLOK free-float handguard, this interface is perfect for mounting a dedicated accessories in this system.
On top of the upper like on the handguard of this airsoft rifle, you'll find a full-length 22mm Picatinny rail system for optics or tactical flashlights. The 6-position polymer enhanced stock is equipped with QD attachment points on both sides for tactical sling. The functional bolt catch system holds the dummy bolt open and gives easy access to the rotary hop-up adjustment.

Enhanced internal gearbox system.

The Cyma Platinum brand has accustomed us to innovations in terms of gearbox upgrades, which we can find in this airsoft model too. The CM.092LT in the new E-EDITION HIGH-SPEED configuration has a velocity of around 390 fps and, in combination with a LiPo battery, a ROF of around 25rps, a faster trigger response, note that the rifle is equipped with a flat-faced E-CT1 styled trigger unit. An unical MOSFET in combination with low-resistance wires and a T-connector plug protects all the electrical installation. This was achieved due to the new gearbox parts with increased durability, such as:

• Reinforced V2 gearbox frame with quick spring change system
• Processor unit with built-in MOSFET system
• Full steel teeth polycarbonate piston
• CNC machined steel gear set (ratio: 13:1)
• 8mm ball bearings
• CNC machined aluminum silent cylinder and piston head set (ball bearing piston head, double o-ring cylinder head)
• Ball bearing spring guide
• A high-speed engine
• Metal rotary hop-up chamber

The set includes:

• CM.092LT airsoft rifle
• 130rd magazine

Products recommended by us matching replica:

• Magazines:160RD M4/AR15 MID-CAP MAGAZINE, 300 RD HI-CAP STEEL MAGAZINE, 150RD MID-CAP STEEL MAGAZINE, 320RD HI-CAP STEEL MAGAZINE, M4 SERIES HI-CAP MAGAZINE FOR 400 BB`S.
• Batteries:Battery Li-ion 2600 mAh 7,4V Stick - T-Plug [VB], Gens Ace 25C 1000mAh 3S1P 11.1V Airsoft LiPo Battery Gens ace G-Tech T-Plug, GEA152S25DGT, Gens Ace 25C 1000mAh 2S1P 7.4V Airsoft LiPo Battery Gens ace G-Tech T-Plug

When tuning your replica, we recommend replacing the gearbox shell with a gearbox made using the CNC method. Thanks to durable aluminum it is possible to use strong springs and the precision of manufacturing facilitates assembly and ensures the perfect fit of the parts. The suitable gearbox frame is CNC BILLET CM.097 V2 GEARBOX

In order to meet the expectations of our customers, we offer factory replacement parts.
Check our offer.
Spring set for gearbox M4/V2 [CYMA], V2/V3 SILENT CYLINDER HEAD, EXTRA SEAL [CYMA]
If you do not find the part you need, please contact our service department.

Every replica pass initial check up. It's being checked and overshooted on XCORTECH X3200 chronograph.