ASR118 - BOAR Competition 16" SDU2.0 - Black [APS]

The latest version of the ASR118 BOAR Competition 16" SDU2.0 electric rifle is equipped with an advanced electronic trigger unit called the "Super Dynamic Micro Chip Unit" with a built-in programmable MOSFET system, offering an extremely fast trigger response.

The system provides five firing modes. To change them, press and hold the button located on the outside of the gearbox, accessible through the magazine well. When pressed, a red LED will light up. Keep the button held until the LED flashes twice, then release it to confirm the selected mode. Repeat the process to switch to further modes.

Available modes:

• Safe - Semi - Auto (default)
• Safe - Semi - 3-round burst
• Safe - 2-round burst - Auto
• Safe - 3-round burst - Auto
• Safe - 3-round burst - 9-round burst

To reset the electronic trigger to factory settings (mode 1), double-press the button or disconnect the power source at any time.

The trigger unit can be easily replaced, and servicing is straightforward. The chip is programmed to protect the gearbox. The eSilver Edge gearbox has been designed specifically for use with the electronic trigger and reinforced in key stress points such as the cylinder head area and spring guide mount.

The piston includes metal teeth and works together with reinforced steel gears (the sector gear also uses a magnetic sensor for the trigger unit). The internal components are compatible with parts in TM standards, except for the sector gear.

The eSilver Edge gearbox operates optimally with power sources from 7.4V to 12.5V and is fully LiPo-ready. Current draw remains stable and does not exceed 11A within this voltage range, ensuring reduced wear and increased component longevity.

Testing shows that trigger response time is approximately 0.02 seconds. The short trigger pull results in exceptionally fast firing reaction.

Key features:

• Quick-change spring system
• Polished gearbox shell
• 8 mm ball bearings, bearing piston head and spring guide
• TM-compatible internal parts (except sector gear)
• Anti-corrosion coating inside the gearbox
• Micro-switch for immediate trigger response
• Quick-Change spring guide with 4 locking lugs for improved spring stability
• Programmable SDU2.0 MOSFET with overload protection
• New mechanical sights “Hawk"
• Metal external body, gearbox and handguard
• Inner barrel diameter: 6.03 mm
• Hi-Cap magazine capacity: 300 BBs
• Ambidextrous magazine release

Recommended products compatible with the replica:

• Batteries: Battery Li-Po 1100mAh 11,1V 20C - Deans [IPower], Battery Li-Po 1100mAh 7,4V 20C - Deans [IPower]
• Battery charger: V3+ Charger for LiPo/LiFe 2S/3S [IPower]

WARNING! Battery and charger are not included and must be purchased separately.

Each replica undergoes a zero inspection and is tested on an XCORTECH X3200 chronograph