AR15 E3 Rifle AT-AR07 [Arcturus]
Artikel nicht verfügbar
-
Lieferformen
Geben Sie Land und Postleitzahl ein, um die Versandkosten anzuzeigen
-
Technische Daten
Hersteller: Arcturus Code: AT-AR07E EAN 812332027040 Gewicht 2650 g Replica Model Softair AR15 / M4 / M16 Farbe schwarz Material aluminium, stahl Feuer Art auto, semi Akku im Set NEIN Akku Stecker Art T-connerctor Gearboxa Art v.2 Lager Durchmesser 8 mm Garantiezeit 12 Monate Munition ,23g, .25g Seriennummer JA Länge mm 820 Kapazität des Magazins 130 BB Innenlauflänge mm 380 Energie der Projektilmündung 1.64 J Mündungsgeschwindigkeit 420 FPS mit 0,20g BBs Innerer Laufdurchmesser mm 6.01 Anzahl Magazine in Set Stück 1 -
Meinungen
Meinung hinzufügen-
- 12.06.2025 schrieb:the external quality of the replica is very good and it has a nice design. it is resistant and robust. but i noticed that the barrel tends to bend on one side, i don't know if it is a coincidence that it is like this or if it is a common defect for these aegs, the fact is that it does not compromise the performance of the replica
-
The new MOS - Arcturus AR07 Rifle -14.5".
For years, MOS has been gaining experience, producing items for firearms as well as for the largest companies from the ASG industry.
The replica was made accurately and carefully.
The presented AR rifle has a ambi bolt catch and a ambi magazine release. The M-Lok handguard has 5 push button points and a Picatinny rail.
The lower receiver has two push button points and the last one can be found on a light stock.
NOTICE! Replica have a unique serial number!
Most of the outer elements such as the upper and lower receiver, the outer barrel and the receiver extension are made of aluminium and light alloys. And the whole was secured with an anode.
The fire selector, magazine catch, bolt catch, ejection port cover are made of steel. And then protected against corrosion.
Gearbox and its interior are another advantage of this replica.
It has a quick spring change system and the spring guide, as well as the piston head, had bearings. Polymer piston is equipped with steel teeth that work with high-quality gears.
Gears are mounted on slide bearings to be able to cope with the highest loads. Only the motor rack is mounted on ball bearings to ensure that it is free to spin at high speeds.
Inside we will find electric trigger "Micro Switch " that is connected to the low-resistance wiring, preparing the replica for cooperation with Li-Po batteries.
The use of an electric trigger eliminates the problem of burned out contacts and improves the response to the trigger.
The gearbox's finished with teflon, sealed nozzle. It works with a polymer, Rotary hop-up chamber in which a hardened 6.01mm precision steel barrel is mounted.
All materials and solutions used to create the replica put the company MOS in the lead.
The set includes:
For years, MOS has been gaining experience, producing items for firearms as well as for the largest companies from the ASG industry.
The replica was made accurately and carefully.
The presented AR rifle has a ambi bolt catch and a ambi magazine release. The M-Lok handguard has 5 push button points and a Picatinny rail.
The lower receiver has two push button points and the last one can be found on a light stock.
NOTICE! Replica have a unique serial number!
Most of the outer elements such as the upper and lower receiver, the outer barrel and the receiver extension are made of aluminium and light alloys. And the whole was secured with an anode.
The fire selector, magazine catch, bolt catch, ejection port cover are made of steel. And then protected against corrosion.
Gearbox and its interior are another advantage of this replica.
It has a quick spring change system and the spring guide, as well as the piston head, had bearings. Polymer piston is equipped with steel teeth that work with high-quality gears.
Gears are mounted on slide bearings to be able to cope with the highest loads. Only the motor rack is mounted on ball bearings to ensure that it is free to spin at high speeds.
Inside we will find electric trigger "Micro Switch " that is connected to the low-resistance wiring, preparing the replica for cooperation with Li-Po batteries.
The use of an electric trigger eliminates the problem of burned out contacts and improves the response to the trigger.
The gearbox's finished with teflon, sealed nozzle. It works with a polymer, Rotary hop-up chamber in which a hardened 6.01mm precision steel barrel is mounted.
All materials and solutions used to create the replica put the company MOS in the lead.
The set includes:
- folding sights
- adjustable stock
- variable capacity magazine 30-130 bb
Sicherheits- und Verwendungsrichtlinien
Bitte lesen Sie die folgenden Informationen für eine sichere Verwendung des Produkts:SKU: AT-AR07E · EAN: 812332027040 · AR15 E3 Rifle AT-AR07 [Arcturus] ·
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Verantwortliche Person und Hersteller 

Für das Inverkehrbringen des Produkts in der EU verantwortliche Person:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · [email protected]
Hersteller:
REPLIKAS, DIE AUF TAIWANGUN.COM VERFÜGBAR SIND, DÜRFEN NUR VON VOLLJÄHRIGEN GEKAUFT WERDEN. SIE SIND NUR FÜR ASG- UND TAKTISCHE SPIELE BESTIMMT
Fragen? Wir helfen Ihnen gerne weiter. Senden Sie uns eine E-Mail an [email protected]
* Die Preise enthalten die gesetzliche Mehrwertsteuer ohne Versandkosten

