[Set] CM.057S SVDS Airsoft AEG Sniper Rifle [CYMA] + Steel Bipod for SVD replica [BattleAxe]

Sehr ordentliche Verarbeitung. Alles funktioniert problemlos. Passt gut auf eine A&K Dragunov. Die Waffe lässt sich trotzdem gut führen, das Zweibein schwingt ein bisschen hin und her im eingeklappten Zustand. Einige bringen das auch weiter vorne am Holz an. Davon rate ich ab, da dadurch Druckstellen am Holz entstehen.

Hat aber auch ordentlich Gewicht, bitte bedenken!

ENDLICH!

Noch nie habe ich mich soo sehr auf ein Zweibein gefreut, denn jeder SVD Spieler weiß dass so ein SVD Zweibein Replikat nur schwer zu finden ist da es meist ausverkauft oder zu teuer ist.

Ncoh dazu gibt es die Ausführung hier in Stahl oder in Aluminium.... einfach super. Als es ankam war ich zuerst skeptisch da die Mechanik auf den ersten Blick etwas wackelig erscheint und auch ein wenig gequietscht hat. Nach etwas öl und dem ersten Match habe ich mich aber nochmal verliebt. Es sieht einfach super aus, ist in Stahl sehr stabil, schwer und ist wirklich schnell aus und eingeklappt. Perfekt fürs Auge und das Spielfeld!

Das Zweibein lässt sich gut anpassen und stützt das cyma SVD gut. Allerdings wackelt das Gewehr auf dem Zweibein hin und her,damit es auch vernünftig ausgerichtet werden kann. Nur leider ist das Zweibein im eingeklappten Zustand auch am herumschwabbeln was beim Tragen mit dem Gurt oder beim schleichen etwas störend wirkt. Eine Arretierung wäre schön gewesen aber ein Gummiband erledigt den Job einigermaßen.

Excellent item, has decent weight, easy to mount, realistic and perfect for replicating Soviet/Rusfor marksman kits. It can be mounted and directed both ways. Bipod legs are easily adjusted by pulling out captive pins under spring tension, allowing one of four height settings. Rubberized ends prevent slipping on the surface. Overall very good accessorie for given price.

Even after a few months of using this majestic piece, CM.057S is still serving me really good, especially considering I haven't changed any internals at all. The external build quality is absolutely on-par with other high-end replicas I have laid my hands on, in many places even better, especially considering the price. Close to no wobble, the only place wobbling here is the stock and that can be easily fixed(with duct tape for example). The folding stock and a shorter barrel(comparing to regular SVD) is absolutely a life-saver, making it much easier to transport - saving a lot of space in gun cases and car trunks. This makes even storing much easier, as you can just fold it up and place it standing upwards.
The internals are quite good, of course not the best, but an absolute bargain for the price. With a good enough scope, you can definetely make some great shots even right out of the box. The hop-up adjustment is quite stiff which makes the adjustment more precise which is important considering this is a DMR type rifle.
If you change some of the internals this rifle can definetely serve you a lifetime, especially if you treat her right.

It was easy to use, as good as expected.
No user manual needed to apply it to the rifle.
The SVD Rifle looks much better with this bipod.
I'm looking for the first usage on the field.
I think it is worth the price.

This is a great gun for the money. The build is sturdy, there's no wobbling, or looseness. The battery compartment in the handguard is nice and roomy, and the dovetail on the side of the receiver is solid, and allows both AK and SVD style sight mounts. It's very accurate, and the hop up is super easy to adjust, as are the sights if you have standard AK style sight tools or a cleaning kit. This rifle compliments my Soviet era loadout nicely!

Super happy with the replica, big thumb up for previous review of Filip & Asbjorn, QCS love it, I own earlier version of Cyma SVD and SVU with standard gearbox, installing a stiffer spring was not easy, but with this QCS gearbox, absolutely loving it.
I had a problem with the hop up dial, it was dull/stiff/blockish, dissemble the unit and sandpaper some surface, works like a charm now :D My recommendation is atleast change the oring of the piston head, original one doesn’t work well (Too thick like previous review said) & get a nozzle(17mm) with oring. The stock is a bit wobbly, put little rubber behind the lock will do the job.
Big applaud to Cyma, finally making some upgrade parts for SVD line like gearbox, piston, cylinderhead etc.

A surprisingly cool replica for the money.
External build quality is nice and adequate, the whole assembly system is well thought out(RS clone) and pleasant to work on.
The newest internals are pretty nice - QCS(great!), steel rack piston, aluminium piston head and cylinder head. Piston head oring was too thick, porting didn't work and had to replace it for better results. Stock nozzle is without an oring, but had surprisingly good consistency and no power loss compared to a FPS softair replacement.
Inner barrel is still slightly too long, but it's manageable. Cheekrest is a bit tall for use with iron sights.
Stock it was shooting ~1.6J out of the box, not 1,8 but it's within norm, I guess.

The quality of the internals really surprised me! I was ready to upgrade almost everything, but the only thing I will be upgrading in the gearbox is the nozzle (it's plastic and without O-rings). The piston, piston head and cylinder head really surprised me, they look like they're high quality. The piston also had full steel teeth, not just the two steel teeth advertised in the description.
The gearbox has quick change for the spring, it is the easiest spring change I have ever done in my life. Just pop the top cover off, and the spring guide is right there. Push it a bit, twist it and the spring comes out. It doesn't require much force, but still feels solid, so it won't come out unless you want it to.

The externals are nice, don't feel too cheap but not top notch either. But for the price you really can't complain too much. You can get at least five of these rifles for the price of the new one from LCT, so this is far better value.

Overall I think this is probably the best value I have ever gotten from a replica!

If you want an SVD look no further than the SVD-S as it saves you from having to upgrade the air pressure to a point where you get no negative pull in the 690 MM barrel as the SVD-S has a more comfortable 590 MM barrel. It is also easier to store for people with limited space. Now if you just want a DMR and do not care for the model look for something else. SVD AEG's are hard to upgrade and their parts are spare. You will also obviously have a harder time mounting attachments that you might want. But again if you are looking to 100% buy an SVD AEG go for it its pretty good. Marking it as a 4 star here due to me having issues with the cables of the replica sent to me to the point where it did not shoot on arrival.

I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.

I bought a cm.057s from you. low-quality product, the fuse is screwed very badly, after each shot you have to push the trigger back with your finger. instead of 440fps, only 410fps. the store employees have not checked the product.