[Set] CM.057C SVU Airsoft AEG Sniper Rifle [CYMA] + SVD/SVU AEG series mid-cap magazine for 100 BB s [CYMA]

Feeds 0.36g BBs perfectly, no wobbling in CM057 SVD. Sturdy construction with good weight and easy handling, quite aesthetic as well. BB release is working fine, the spring seems.to be strong enough to reliably feed 0.4xg BBs as well.

Mags don't malfunction and fit very nicely in the SVD/SVU. Fit is better than on much older 057 series, the current generation is good for what you get. To lengthen the lifespan of the magazine internals, I load them with only 90bbs.

Semplicemente fantastico, esattamente come speravo. Ho chiesto di spedirmelo con una potenza bassa, 310 fp, ed è arrivato esattamente come richiesto, un filo sotto 1j, come da legge italiana. Spedizione velocissima, imballaggio perfetti, soddisfatto al 100%. Consigliato

The CYMA SVU is a very unique base to build a DMR from. The rifle itself, without the suppressor, is about as long as a mk18 but with an inner barrel almost double the length. There are a few quirks to this replica that you should know of first:

The butt pad angle is atrocious. The gun will slip down from your shoulder more often than not. Thankfully there are 3d printed remedies to this.

The dust cover is a little noisy. It rattles slightly when you move the replica.

The inner barrel extends into the (foam filled) supressor. You will need to undo a small allen head set screw in the supressor to unscrew it off.

The gearbox has 4 gears and parts compatibility is strange. If you want to HPA it like I did, you need a F2 with an offset nozzle. They make a cyma spec SVD nozzle just for this gun. It will also require some soldering knowledge.

The top rail is held on by a small plastic retainer. I dont know why they decided to do it this way, but if you have heavy optics on the top rail it will wear down that little retainer. It would be a good idea to make something that attaches the top rail to the secured bottom rail.

Over all, this replica does need some DIY ability to get the most out of it.

What's in the box: you'll receive the replica, a high cap magazine, an extra spring for downgrading the FPS, a 8.4 NiHM battery and charger.
The material used feel nice and of good quality. There are no wobbles between parts. The metal is smooth and sturdy.
The replica shoots a bit slow with the battery that it comes with, but it's not a big obstacles to overcome (you'll need a stronger battery and a MOSFET). the AK stick type batteries will fit nicely.
I suggest getting the metal midcaps because they sit much better and fees a bit better. The plastic ones are a bit bigger and sometimes need a tap from underneath to sit properly.
Upgradability wise you will have limited options as it is a special SVD gearbox with 4 gears and a mechanical connection to the front trigger. I would suggest getting a new nozzle with o rings inside as the stock nozzle lacks them. You can change the barrel to a 509mm length because the stock barrel is a bit too long to get optimal range. The hop up is great tho. If you want to install a Mosfet, you'll need to get an inline MOSFET because the optical mosfets don't fit inside.
All in all, its a great replica with potential that guarantees all the players will want to see it closer.

Feeds flawlessly in my Cyma SVU. Looks good. What else I can add? If you're looking for a mag for the Cyma SVD/SVU, this is the one. Good bang for the buck.

When it gets used a lot it gives the magazine nice, robust look (that "war-torn" look with scratches etc.)

The gun is realistic looking, pretty much an exact replica, weight and everything and sure is sexy, that's why it gets up to 2 stars.
There's a myriad of issues with it out of the box.
For starters, even the detailed cyma pdf sent by taiwangun, even that lacks any info on this specific variant, so disassembly/assembly is pain.
The suppressor, which is removable and is a standard 14mm thread, houses the extra part of the inner barrel, which has no o rings at the end, making it shoot way off to the side.
The hop dial is basically there for show, no noticeable change no matter how far it is to one end or the other. Due to the shitty accuracy, it's almost like the dial is not changing upward/downward, but sideways.
That brings us to range. For a DMR this has ass range. Think about like 25-30 meters tops.
Upgrade-wise, lmk if someone manages to put a mosfet in this thing. The m-lok rails are there so it can be kitted out relatively easily, but that doesn't balance out the shortcomings.

A filler for an IED made of plastic and a metal shell, outwardly very close to the real one. The volume of fillers is sufficient, it should not be loaded with balls to failure if you want it to work without fail for several seasons for you. Due to the specifics of the outer casing, it cannot be disassembled easily for cleaning and spring replacement. Due to its size, it requires special pockets to carry the vest.

Пълнител за СВУ изработен от пластмаса и метална обвивка, външно много се доближава до истинският. Обема на пълнитела е достатъчен, не бив ада се зарежда с топчета до отказ, ако желаете да работи безотказно няколко сезона за Вас. Поради спецификата на външният корпус не може да буде разглобен лесно за почистване и смяна на пружината. Поради габарита си изисква специални джобове за пренос на жилетката.

Пълнител за СВУ изработен от пластмаса и метална обвивка, външно много се доближава до истинският. Обема на пълнитела е достатъчен, не бив ада се зарежда с топчета до отказ, ако желаете да работи безотказно няколко сезона за Вас. Поради спецификата на външният корпус не може да буде разглобен лесно за почистване и смяна на пружината. Поради габарита си изисква специални джобове за пренос на жилетката.

Perfect, just perfect, no feeding issues, durable metal shell, can lift even heavy bbs, the lip that goes in the mag catch needs 1mm to be filed down to fit perfect.
It completes the look of the svd, i like these overe the new polimer ones, but that's for my taste.

good rifle a bit back heavy an the stock is a bit defrint
to use fels like it want to slide down a lot
need at least some internel opgreades ......................................................................................................

Great rifle, shoots pretty accurate out of the box but the inner barrel length is a bit too long for it to be accurate. definitely some modding required for it to classify as a DMR. wish it came with a full steel tooth piston, and the pretty bad battery space. Another issue i had with the rifle is the top cover that just does not click into place after 5-10 times of removing it, because the clip that holds the top cover in place is made of cheap plastic. if this was metal instead it would last years but for me it lasted about a month

I ordered this one for my own SVD made by RS. Original RS magazines are expensive and impossible to obtain, so this is good replacement. Requires a few minutes of filing as they are designed for Cyma, but the RS also fits perfectly in the finals.

Quite disappointed with this one actualy. From the outside its almost flawless. Nice lines and structure. Weights like a truck jet is smaller in real life than in pictures. But when i got to fire it.... It shoots 2 bbs or jams, then when it fires i cant hit anything beyond 30m range. The wiring is a mess, its jammed in handguard, magazine hits it when you insert mag, and - wire was almost broken near the engine. For such a high price i think its unacceptable by cyma.

Very good looking, you will get thumbs up and questions all day bout it. Very compact. Simply best one in terms of base for DMR tuning i think, because its build like a tank and none of internals can move freely, everything is tight and adjustable. Very good hop up unit (with minor mods)

I think cyma wasted all the money on outside look and materials, and ditched the internals. (when are they going to sell just a shell so you can install normal stuff and not overpay? ) Flimsy reciever cover (can be fixed) and narrow battery space (i managed to squeeze 11.1 li ion 2600 from ipower since original 8.4 couldnt fire at 450 fps spring, thou had to file inner barrel a bit) Tuning a bit rough because all parts are proprietary