[Set] Airsoft Replica EC-909 Advanced Edition (upgraded gearbox) - Black [E&C] + Battery Li-Po 2200mAh 11,1V 20/40C - T-connector [8FIELDS] + Compa...

Ich hatte keinerlei Probleme beim Laden meiner 7,4-V-LiPo-Akkus. Die bestellten 11,1-V-Akkus habe ich noch nicht getestet, aber ich gehe davon aus, dass es keine Schwierigkeiten geben wird. Sie luden auch recht schnell und sind insgesamt sehr solide.

I recently purchased this airsoft charger, and while it's definitely not the best charger available, it does exactly what it's supposed to do. If you're looking for something simple and affordable to keep your airsoft batteries charged, this is a solid option.
The build quality is decent for the price, and it's easy to use, even if you're new to airsoft. Just plug it in, connect your battery, and let it charge. It doesn't have advanced features like automatic balancing, digital displays, or fast charging that you would find on higher-end chargers, but that's to be expected at this price point.
Charging times are reasonable, although not the fastest. It gets the job done without any major issues, making it a good backup charger or a reliable choice for casual players who don't need premium performance. I've used it several times, and it has worked consistently without overheating or causing any problems with my batteries.
Overall, this charger offers good value for the money. It's not designed for serious enthusiasts who want the latest features, but if you just need a dependable charger that works, this one is worth considering. It may not be perfect, but it gets the job done well enough.

I bought this little LIPO charger because my others one broke down .It does exactly what it says. It balances my 2S and 3S batteries well, and the red-to-green lights let you know when each cell is done. No screen, no fuss, just plug in. It's slow, but it's simple . If you're a beginner or need a backup, this is solid. Just don't expect high-end features, it's strictly a basic and just does the job.

In my opinion, this is the best choice for anyone looking for a reliable, easy-to-use charger for their replica batteries. After using it for several games and sessions, my experience with it has been entirely positive. I primarily use it to charge 7.4V and 11.1V LiPo batteries, and so far it has always worked reliably and without any issues. What’s particularly important to me is that there are no complicated settings to deal with just connect the battery, plug in the charger, and it’s ready to go. This is especially useful when getting ready quickly before a game. The charger’s small size is a huge advantage because it fits easily alongside my airsoft gear, so I can easily take it with me for weekend games or multi-day events. The LED indicators are clearly visible, so I always know where the charging process stands. The balance charging function provides extra safety, which I think is essential for LiPo batteries. Another plus is that it doesn’t overheat during use, operates stably, and I haven’t had a single issue with any battery so far. Obviously, it’s not a professional, display-equipped, programmable charger, but for airsoft purposes, I think it’s completely unnecessary to spend more than this if you’re looking for a reliable basic charger.

De B3Pro compacte LiPo-lader is een prima instapmodel voor wie op zoek is naar een eenvoudige en betaalbare manier om LiPo-accu’s op te laden. Het apparaat is compact, licht en werkt direct op netstroom, waardoor je zonder gedoe snel aan de slag kunt. Dankzij de balance-functie worden de cellen afzonderlijk geladen, wat bijdraagt aan een veiligere werking en een betere levensduur van je batterij.

Wel is het duidelijk dat deze lader vooral bedoeld is voor beginners of hobbygebruik, omdat hij geen geavanceerde functies heeft zoals instelbare laadstromen of opslagmodus. Toch doet hij wat hij moet doen: betrouwbaar opladen zonder ingewikkelde instellingen. Al met al is de B3Pro een goede keuze als je een simpele, no-nonsense LiPo-lader zoekt voor dagelijks gebruik

To put it simple this is a very good charger. I thought that my batteries got charge fast. it's very small so it's easy to bring it where ever you go. Don't forget the price. like always Taiwangun have good cheap stuff

Top charger - top price.
I bought 3 of these chargers. All my airsoft guns are now working with Li-ion batteries because the original Nimh batteries are now waste after 3 years. It works for all Li-ion batteries 7.4V and 11.1V (2 cells and 3 cells).
no need to buy an expensive charger able to charge Nimh as well as Li-ion. Better change to Li-ion batteries with this charger.
It is fast charging, what ist not good for all batteries, but Li-ion support much more charging current as Nimh.
Best choice for a god price.

Had no problems whatsoever with charging my 7,4V LiPo-batteries. Am yet to try it with the 11,1V I've ordered, but I can't think there'd be any trouble. They charged pretty quickly as well and are just overall very sound.

I’ve been using this replica for about two years as a DMR with several upgrades. Overall, it performs well in the DMR role and has good accuracy and consistency once tuned properly. However, the stock gearbox had a serious issue: after a lot of shots, it could get stuck in safe mode and would only work again if the gearbox was manually rotated. After addressing this problem and upgrading key components, the replica became much more reliable. With the right modifications, it’s a solid platform, but the factory gearbox definitely needed improvement. The body of the gun is perfect for better interior. I have also an issue, the iron sights should not placed on the factory replica, because the they scratch the paint, without flipping it up.

It does what it's made for. I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left. Vingardium leviosa. I really don't know what to say....

For the price, it's really worth it. It works better then my friends. You can actually see wich cell is charged, and with the help of this, you can see wich cell is damaged. Because of this new charger (because I used to charge my battery with my friends charger), I realised that my old Li-Po battery is gone bad, so I had to buy a new one. If I wouldn't have bought this battery charger, I wouldn't know what went wrong: my battery or my gun

I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left to charge and doesn't overheat itself or the battery at all. Unless you want one of those big fancy ones with a screen telling you everything that's going on (which you realistically don't need for airsoft) this is the best pick.

This replica comes with a sturdy metal frame and very good looks. The replica is simple to use so i would recommend this replica for someone who is looking into getting a DMR.

but the replica has some minor cons, i found that the iron sights couldn't be flipped up and would scrath the paint underneath. But the rail works good with red dot sights or other picatinny attachments

Fast reliable and very affordable charger, takes about an hour to fully charge a 11.1V 1300mah lipo. Also very fast delivery and packaged safely. Im writing the rest of this text cause it needs to be 200 characters long :)

Great charger! The 3 leds give a nice red and green indicator on which cell is loaded. That way you know when to take the battery off the charger. For the rest it charges and haven't had a single problem with it.

I don’t know if its only with me, but from the very first use of the charger it did not perform well. I put my 11.V li-po battery in it and it said that it has no charge so I left it as it is. After more than an hour not even one cell was charged. Then I reconnected the battery with the charger and it showed that it was fully charged. Then yesterdays after my first game a put another battery, brand new, to charge it. Left it overnight (i know its not good) and today i tetsed if it was fully charged- i was not. The green dots are always going from green to red despite the fact the battery has been sitting long enough to the charger

Very compact and light B3Pro charger. It is used for LiPo/Li-Ion batteries. Item work out of the box, yust plug it in a wall outlet and plug in your replica battery. I have used it many times and it works very good.

It’s a great charger, can charge 7.4-11.1 Li-Pos without any problems. Great price, simple and trustworthy. My friend got one too, since he had an Ipower B3 charger, which has electroshock problems…

In conclusion, great-great-great, get it! :)

Have a nice day!

10/10, works well never had a problem with it, recommend to everyone but also a LiPo battery bag so your battery can live longer, never had any problem with this battery, still kinda new for me, used it on a few games but never had any problems with it and i was able to play a full game with only one

two of my airsoft buddies got this charger and it is the best one for that price, perfect charger for new players on low budget.
works well on both 11.1v battery as well as 7.4v batteries

In terms of price/value ratio, I think it's worth it if you don't want to spend a lot on a battery charger that can charge both 7.4v and 11.1v batteries. It charges my 1200mAh battery in about 2 hours at 11.1v charge.

Gearbox died after 3 skirms.
Gearbox teeth got stripped with a 7.4 lipo.
Overall a good gun when it shoots. Accurate and precise. Friend is thabkfully able to repair it.
Just a bit unlucky with the gearbox.
Still for the price it's a beast!

If you are looking for a good DMR base replica, this is a great choice. The external build is very solid. The magazines, charging handle and stock have a bit of wobble, but it's not too bad. Can't complain about the externals. The gearbox is very good and comes with top-notch seal. However the hop-up may require attention.

If you are satisfied with the stock fps and are looking to use the gun as stock as possible, you should make sure the nub and bucking are properly installed and correctly interfacing with the hop unit, as me, and other people have gotten these guns with misaligned hopup setups. Otherwise, there isn't much to worry about.

If you are looking to upgrade this gun, I will go over all the stock parts and considerations you should make.

---Barrel and hop assembly---
-Barrel is a 6.04mm diameter 362mm length brass barrel. The window is rounded, therefore it's not suitable for mods like R-Hop. The barrel to cylinder radio is ideal for heavy bbs, even up to 0.45g. Using much lighter bbs may cause overvoluming, decrease shot energy and potentially impact accuracy.
-Bucking is a yellow translucent supple silicone bucking that has tight fit when installed. It has thickening to seal well against the hop up unit and barrel. The bucking meshes fine with the nozzle. It's an ok bucking, just needs a proper install.
-Hop nub is a flat hop nub. Snug fit in the hop unit, interfaces well with the arm. If you are planning to R-Hop, you don't need to replace it. For flat hop, it maybe be a little too thin and not push down far enough.
-Hop unit is a tough blue plastic rotary unit. Needs to be pushed onto the barrel just enough to put on the c-clip, or there may be issues. Do not force it on as far as possible.

---Cylinder, piston assemblies, nozzle--
-Cylinder head is made of brass, has 2 o-rings and thick rubber padding for angle of engagement. The padding can wiggle side to side, which might affect shot consistency. Despite that, it's inserted into the head so it won't get detached. Air-seal with the cylinder is amazing.
-Cylinder is not attracted to neodymium magnets. I would assume its aluminum. It's a perfectly fine cylinder, but if it's aluminum, it may be prone to scratching.
-Nozzle is brass, has 2 o-rings and seals well, but not perfectly with the cylinder head. Still very good for a stock gun.
-Piston head is aluminum, has 1 o-ring, and bearings. It seals incredibly well for a stock gun. No issues
-Piston is made of tough blue plastic, has a steel rack with 1 less pickup tooth for proper gear engagement. It's good, fits well in the gearbox rails.

---Tappet plate, tappet plate spring---
-Tappet plate is made of tough blue plastic. It holds the nozzle a bit loose. Though that isn't really a problem. It's made to work well with the sector chip of the sector gear.
-Tappet plate spring is nice and strong.

---Spring and spring guide---
-Spring depends on what fps you picked.
-Spring guide is steel and has bearings.

---Gears and motor---
-Stock shimming is mediocre, but nothing tragic.
-Sector gear has a sector chip. Angle of engagement with piston is fine.
-All gears are typical 18:1, but sector gear has more teeth to pull the longer V2.5 piston.
-Motor is a chaoli motor with quite a few winds per armature. However the motor cage magnets are very weak. Overall, the motor is not strong, but it should be fine if you use the stock main spring. If you upgrade the spring and/or shim poorly, the motor may overheat.

---Wiring and trigger---
-Wiring is tough, a simple mosfet is included. 11.1v batteries run well. 14.8v batteries work fine too. If you do use 14.8v, expect not to be eligible for warranty if something goes wrong (I'm not sure, but better be safe than sorry).
-Trigger has a heavier pull than an average AEG.
-The trigger unit does not have a microswitch. There are metal contacts.

---Gearbox shell, bearings---
-Gearbox shell is not attracted by neodymium magnets. Seems to be aluminum. Gearbox internals are greased only very lightly.
-Bearings (not bushings) are 8mm, not lubricated. You should lubricate your bearings.

Overall if you plan on modding, your focus should be on the hop unit. If you plan to use a stronger spring, then a more efficient, torquier motor and a good, powerful battery should be used. The bearings should be lubed before operation. You may also want to shim the rubber padding of the cylinder head to minimize movement.
This is a really nice replica, which needs just a few changes to become a great DMR.

Its easy to bring with yourself everywhere if you want,fast and safety charge beceause of the little led lights. Its just a charger, but cool.

A very good charger for Lipo/ Li-ion batteries.
The price is also good like always with taiwangun. I think that taiwangun is the best shop for airsoft in europe. The pric's for batteries are also good. I buy 2 Lipo 's and they work fine.

The B3PRO compact lipo charger is an excellent choice for airsoft enthusiasts as well. This charger can be ideal for safely and efficiently charging lithium polymer (LiPo) batteries used in airsoft guns.

Its small size and lightweight design make it easy to carry to airsoft matches or adventures, allowing you to charge batteries anytime and anywhere to ensure they're always ready for action.

The B3PRO charger features several safety functions, such as overheat protection and short-circuit protection, ensuring that the charging process is safe and proper.

However, it's essential to always follow the manufacturer's recommended charging and usage guidelines to prevent battery damage and ensure their longer lifespan. With the B3PRO, you can easily maintain the performance of your airsoft guns, ensuring they're always ready for the next battle.

Does the job well. A fantastic option for your Tamiya batteries, one of these chargers is a must-have for keeping your models powered up.

Offers safety and peace-of-mind when charging batteries, it can be quite stressful and dangerous to charge directly, in my opinion this is the best option for the price!

Works perfectly fine holds for the better part of 4h of action packet games, charges at a decent speed. Probably only problem so far is that if one segment discharges faster then the other segments you might have to drain the battery or it will not charge, or that could be my charger problem. But all in all lasts a while and because of the voltage has nice power to it.

I bought this replica about a month ago and I am here to share my opinion. Advantages, it is full metal replica (instead of front rails and stock) with very precise fits. The parts donot have any bad movement. The gearbox is well made, donot have any bad noise. The gun has mosfet and with a Lipo battery it has really good fire rate.
Disadvantages,the hopup chamber has some problem. First of all the factory hopup rubber isnot the best, and the spring on the barrel is week.
All in all, I used it in two games and I had dozens of kills from 40-60 meters away.
It has enough power to use 0.40bb to maximize your accuracy.

I bought this as a budget charger and it does what it needs to do, it doesnt have any fancy features etc but it serves its purpose, happy to recommend this to anyone looking for a budget basic charger

The product serves it's purpose. Could use a percentage display. The three LED displays the bare enough information. Recommend to use in a room with adequate ventillation. Product can heat up during use.

Én egy 11,1 V-os akumlátor töltök ami Lipo nagyon gyorsan feltölti és szépen működik is vele minden. Nagyon jó a kijelző rajta hogy látom hogy mennyire van feltöltve az akkumulátor. Ár érték arányban nagyon megérte megvenni nem csalódtam benne. Gyorsan ideért megvagyok elégedve vele.

Cheap charger, works well.
Don't expect features such as load balancing or discharging to a better charge for safer storage. Those are more expensive.
But it does the job well.
Definitely buy a LiPo charger so you can see the percentage of your battery before/during/after play.

Perfect for allday airosfting. Have SA M4 and this battery can last all day. I talking about 6k bbs. So this is all you need :D.

Produkt zgodny z opisem, szybka i bezproblemowa dostawa. Działa bez zarzutów, zapakowany bardzo dobrze, brak jakichkolwiek mankamentów. Jestem mile zaskoczony obsługą klienta i profesjonalnym podejściem. Widać ze ten sklep prowadzą osoby z pasją.