[Set] Airsoft Replica EC-204 Advanced Edition (upgraded gearbox, programmable ETU) - Dark Earth [E&C] + Battery Li-Po 1200mAh 11,1V 20C - Deans [IP...

Ich hatte keinerlei Probleme beim Laden meiner 7,4-V-LiPo-Akkus. Die bestellten 11,1-V-Akkus habe ich noch nicht getestet, aber ich gehe davon aus, dass es keine Schwierigkeiten geben wird. Sie luden auch recht schnell und sind insgesamt sehr solide.

Fits perfect into my ares scar!

Its hard to find batteries for airsoft that have enough mah and that also fits in your replica. Taiwangun always have the solution for a very good price. This battery fits perfect in my ares scar what really have a small battery pocket.

Works really good... Fits for AK platform and in my MK18, but I have to pull out the stock a little bit for more space! It easily fits in the stock tube. The price is acceptable, don't think you'll get it cheaper on other places.

Der Akku macht bisher was er soll. Er ist ca. 18 cm lang (ohne Kabel) passt aber dennoch gut in meine Ak12. Power und Leistungsabgabe sind wie bei meinem anderen Marken-LiPo, also kein Unterschied. Würde ich mir definitiv wieder kaufen.

This battery shape fit AKs (Altough I tried on CYMA, I think on other brands aswell), they drop in without issues and plenty of clearance in the mock gas tube and sightblock.
This one provides enough to make the replica run fast and smooth.
I would've preferred a longer variant with more amps, just get a couple more and fit them in a LiPO pouch.

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

Erős akkumulátor, feltöltés után majdnem egy egésznapos játékot kibírt nekem. De nyílván ez attól is függ hogy milyen játékmódot játszik az ember és hogy milyen gyakran lő. Árához képest nagyon erős és jó akkumulátor

I recently purchased this airsoft charger, and while it's definitely not the best charger available, it does exactly what it's supposed to do. If you're looking for something simple and affordable to keep your airsoft batteries charged, this is a solid option.
The build quality is decent for the price, and it's easy to use, even if you're new to airsoft. Just plug it in, connect your battery, and let it charge. It doesn't have advanced features like automatic balancing, digital displays, or fast charging that you would find on higher-end chargers, but that's to be expected at this price point.
Charging times are reasonable, although not the fastest. It gets the job done without any major issues, making it a good backup charger or a reliable choice for casual players who don't need premium performance. I've used it several times, and it has worked consistently without overheating or causing any problems with my batteries.
Overall, this charger offers good value for the money. It's not designed for serious enthusiasts who want the latest features, but if you just need a dependable charger that works, this one is worth considering. It may not be perfect, but it gets the job done well enough.

I bought this little LIPO charger because my others one broke down .It does exactly what it says. It balances my 2S and 3S batteries well, and the red-to-green lights let you know when each cell is done. No screen, no fuss, just plug in. It's slow, but it's simple . If you're a beginner or need a backup, this is solid. Just don't expect high-end features, it's strictly a basic and just does the job.

this thing is an absolute beast. it's just as gorgeous as it looks on the pictures and the rest lives up to that too. it's very sturdy, has a nice heft to it, and the internals are solid too. it might not be as fancy as the VFC version, but then again, it's half the price. absolutely worth it

The iPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a compact and reliable power source for airsoft AEG replicas. Designed as a 3S LiPo pack, it provides strong and consistent voltage output, which results in improved trigger response and a faster rate of fire compared to standard NiMH batteries.

In use, the 1200mAh capacity offers a good balance between size and runtime, typically lasting for a full skirmish depending on the rifle’s setup and firing style. Its slim stick design makes it ideal for tight battery compartments such as AK dust covers or buffer tubes in M4-style replicas.

The 20C discharge rate ensures stable current delivery, which helps maintain performance even during rapid firing. The pre-installed Deans (T-Plug) connector is also a strong advantage, as it reduces resistance and improves electrical efficiency compared to older connector types.

Overall, this iPower battery is a solid, affordable choice for players looking to upgrade to LiPo performance. It is especially suitable for intermediate users who want better responsiveness without sacrificing compatibility or reliability in the field.

In my opinion, this is the best choice for anyone looking for a reliable, easy-to-use charger for their replica batteries. After using it for several games and sessions, my experience with it has been entirely positive. I primarily use it to charge 7.4V and 11.1V LiPo batteries, and so far it has always worked reliably and without any issues. What’s particularly important to me is that there are no complicated settings to deal with just connect the battery, plug in the charger, and it’s ready to go. This is especially useful when getting ready quickly before a game. The charger’s small size is a huge advantage because it fits easily alongside my airsoft gear, so I can easily take it with me for weekend games or multi-day events. The LED indicators are clearly visible, so I always know where the charging process stands. The balance charging function provides extra safety, which I think is essential for LiPo batteries. Another plus is that it doesn’t overheat during use, operates stably, and I haven’t had a single issue with any battery so far. Obviously, it’s not a professional, display-equipped, programmable charger, but for airsoft purposes, I think it’s completely unnecessary to spend more than this if you’re looking for a reliable basic charger.

Great and reliable battery that performs consistently and holds charge well during extended use. It fits AK replicas quite nicely and is actually more compact than expected, making installation easier in most setups. Compatible with brands like LCT, CYMA, and E&L, where it sits securely without modification. However, some gas tubes can interfere with proper placement. In particular, certain 3D-printed handguards tend to have a smaller gas block diameter, which can prevent the battery from fitting through. With standard handguards, though, it works very well and remains a dependable choice overall.

De B3Pro compacte LiPo-lader is een prima instapmodel voor wie op zoek is naar een eenvoudige en betaalbare manier om LiPo-accu’s op te laden. Het apparaat is compact, licht en werkt direct op netstroom, waardoor je zonder gedoe snel aan de slag kunt. Dankzij de balance-functie worden de cellen afzonderlijk geladen, wat bijdraagt aan een veiligere werking en een betere levensduur van je batterij.

Wel is het duidelijk dat deze lader vooral bedoeld is voor beginners of hobbygebruik, omdat hij geen geavanceerde functies heeft zoals instelbare laadstromen of opslagmodus. Toch doet hij wat hij moet doen: betrouwbaar opladen zonder ingewikkelde instellingen. Al met al is de B3Pro een goede keuze als je een simpele, no-nonsense LiPo-lader zoekt voor dagelijks gebruik

A really nice battery. First perfectly in my LCT AK 105. I could use it for a whole day without charge. When you use a lot of full auto it will probably not last a whole day tho. No bad things to say about this battery.

It holds energy well and releases it. It fits perfectly into the narrow battery holder of the Arctarus AK12. I also tested it on an Arctarus M4 CQB and it fits perfectly into the buttstock.Unlike other accumulators, there were no problems here during play because arctarus replicas are sometimes sensitive to the accumulator.

To put it simple this is a very good charger. I thought that my batteries got charge fast. it's very small so it's easy to bring it where ever you go. Don't forget the price. like always Taiwangun have good cheap stuff

Its a good battery for the price. I have another type of battery from this manufacturer and it does a very good job. This is powerful and its safe. You have that new type of T connector on in, it goes good with specna replicas.

Top charger - top price.
I bought 3 of these chargers. All my airsoft guns are now working with Li-ion batteries because the original Nimh batteries are now waste after 3 years. It works for all Li-ion batteries 7.4V and 11.1V (2 cells and 3 cells).
no need to buy an expensive charger able to charge Nimh as well as Li-ion. Better change to Li-ion batteries with this charger.
It is fast charging, what ist not good for all batteries, but Li-ion support much more charging current as Nimh.
Best choice for a god price.

Had no problems whatsoever with charging my 7,4V LiPo-batteries. Am yet to try it with the 11,1V I've ordered, but I can't think there'd be any trouble. They charged pretty quickly as well and are just overall very sound.

It does what it's made for. I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left. Vingardium leviosa. I really don't know what to say....

For the price, it's really worth it. It works better then my friends. You can actually see wich cell is charged, and with the help of this, you can see wich cell is damaged. Because of this new charger (because I used to charge my battery with my friends charger), I realised that my old Li-Po battery is gone bad, so I had to buy a new one. If I wouldn't have bought this battery charger, I wouldn't know what went wrong: my battery or my gun

I mean it just works, there's nothing more to say about it. It charges the battery fast, has the lights to indicate how much there's left to charge and doesn't overheat itself or the battery at all. Unless you want one of those big fancy ones with a screen telling you everything that's going on (which you realistically don't need for airsoft) this is the best pick.

Fast reliable and very affordable charger, takes about an hour to fully charge a 11.1V 1300mah lipo. Also very fast delivery and packaged safely. Im writing the rest of this text cause it needs to be 200 characters long :)

Great charger! The 3 leds give a nice red and green indicator on which cell is loaded. That way you know when to take the battery off the charger. For the rest it charges and haven't had a single problem with it.

I don’t know if its only with me, but from the very first use of the charger it did not perform well. I put my 11.V li-po battery in it and it said that it has no charge so I left it as it is. After more than an hour not even one cell was charged. Then I reconnected the battery with the charger and it showed that it was fully charged. Then yesterdays after my first game a put another battery, brand new, to charge it. Left it overnight (i know its not good) and today i tetsed if it was fully charged- i was not. The green dots are always going from green to red despite the fact the battery has been sitting long enough to the charger

The IPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a great choice for airsoft. It delivers solid performance, providing reliable power for extended gameplay. Compact, durable, and easy to install. Highly recommended!

Gun looks and feels great. The ETU is easy to use. By default it has safe and semi but can be easily programed to add burst or auto. Out of the box gun can hop 40s and is pretty accurate. Cant shoot low weight bbs under 30s though. Bbs will either fly right to the dirt or straight to the sky. Trigger is pretty snappy. Came with a metal flash hider that was painted orange. Was easy to just scratch the orange paint off it so no need to buy a new flash hider. Standard 14mm- no glue or pin. Has a nice weight and feels sturdy. So far my only issue was the mock bolt catch. It broke after only a few uses. So the bolt is locked backed permanently at least until i figure out how to fix it. Not too huge a problem but still kinda sucks. Can just leave the dust cover up to keep dirt out of the hopup. Overall love the gun. Already bought another gun from EC

Let me start by saying I had very high hopes for this product. And although some of the features live up to my expectations just a couple do not

Externally this thing is exactly what you see. It is rock solid, very quality and extremely well put together

Once you get past the surface things don't exactly fall apart but there are some shortcomings

Will start with the biggest letdown which was the kestrel mosfet

I never got into any of the programming modes because it simply did not function every time

I would get 8-10 maybe even 15 trigger pulls and then dead trigger. Nothing whatsoever, switching the selector to either the auto position which is disabled from the factory or the safety position and then back to semi would restore usage for the same amount of trigger pulls

I didn't even bother to troubleshoot it, I had a leviathan on hand for a different build that I hadn't gotten to yet so I just put it into this replica instead

Another gripe I had was the quick change spring. The slots in the rear of the receiver don't exactly match up with the slots at the rear of the gearbox. It can be changed by removing the buffer tube, but it's a lot of fishing to get everything to come out smoothly. The best solution I have found is putting the buffer tube screw into the actual spring guide and then rocking it around sometimes for three or four minutes before it finally comes loose

Magnets in the motor are very weak, it's probably OK I guess, but I swapped it for a 28 TPA as I don't plan on using auto at any point. Maybe a con maybe or not. Most people would swap a stock motor anyways

The only other disappointment would be a non-radiused gearbox shell. Come on, it's really not hard to do and took me maybe five minutes with a Dremel and the correct bit

That's it, those are the only 3 real cons I can think of. As I've been into the gearbox I can say that everything else is pretty awesome.

Not necessarily a con, but I did swap the sector gear and the spur gear bearings for bushings.

Although I don't necessarily believe the Bearings will fail, I don't feel like taking that chance.

All other internal components were high-quality and although I usually swap a few things I didn't feel the need to swap a single other component. The factory shimming seemed to be on point, AOE was very good, was not excessively greased, may be slightly under greased. Everything With the exception of the Mosfet and the bearings that I swapped out for bushings (which was a personal choice) is good to go right from the factory.

The factory bucking was very very effective and extremely reminiscent of the true hop bucking. Giving excellent excellent range right out of the box.

The one other thing that I did swap was the factory barrel for a Lambda 6.01 at 455 mm. It says it comes With a 450 mm, it is actually factory 455

Overall I am very happy with my purchase. The Kestrel did leave a Bad impression but I wouldn't let it be a dealbreaker. And like I said I never got to the point of troubleshooting and just swapped to the Leviathan which I've already installed in four of my own personal replicas

Overall except for that one item I would highly recommend this and it is a rock solid choice

"A very well-built replica! It's sturdy, just as you would expect from this design, made with high-quality materials and excellent craftsmanship. It delivers exactly what is promised – straight out of the 1.8j box. With a bit of tuning, it's the pinnacle of heavy DMRs. I really like it!"

This gun is epic. I received it one day late due to an issue outside their control. They communicated it to me early. It's a fantastic gun. The cheek rest is a bit loose but that is minor. This gun is a good buy for DMR setups.

perfect battery for ak use, fit with no problems and gives a new life to your replica. good quality connectors and eletrican wires. i got this for backup and ended up using it as a primary since i feel its faster to respond.

Very compact and light B3Pro charger. It is used for LiPo/Li-Ion batteries. Item work out of the box, yust plug it in a wall outlet and plug in your replica battery. I have used it many times and it works very good.

the replica is very robust and sturdily built. the colors are well suited to a G28. It shoots very well, accurate to 60m, with heavier BBs perhaps even more accurate and further. Standard M4 magazine ouches do not fit for the G28 magazines, so you would have to buy larger ones but that's the smallest problem!

The 2 things that I don't like so much but anyway no problem in general is that the cheekrest is a little loose and the boltcatch has a little play forward and backward.

The replica already weighs "a lot" by default, so about 4kg if sight come on it and handle and maybe a laser for the optics, then you are certainly on 5.5-5.8kg.

Anyway, it's a very good weapon out of the box with a built in mosfet, which you can program!

i hope i could help you a lil bit!

Best regards!

It's very strong and robust, the only thing that's loose is the cheekrest and with the Bolt Catch you have a slight play to the left and to the right, otherwise it's pretty robust. Out of the box, the replica shoots pretty accurately up to 60 m, of course you have to take the wind into account for a bit of an offset, but pretty accurately at 60 m, as I said, anything over that would need heavier BBS like zero 45 or something heavier. The weapon is inherently quite heavy so you don't need many attachments. For a DMR the weapon shoots very quickly like a Cyma Daniel Defense mk18 with a Cyma Platinum gearbox (very crispy trigger). The magazines are very large, i.e. the magazine will not fit into an M4 magazine pouch, so a G28 pouch is required.
I hope i could help a little bit. :)

It's a really good battery as a main or a back-up due to it's really slim design. It lasts a good bit and it's perfect for AK type replicas. I'll probably end up buying another one in the future just to keep in a bag when I'm in a long match. Buy 'em, they're great!

It’s a great charger, can charge 7.4-11.1 Li-Pos without any problems. Great price, simple and trustworthy. My friend got one too, since he had an Ipower B3 charger, which has electroshock problems…

In conclusion, great-great-great, get it! :)

Have a nice day!

I am very VERY pleased with the EC-204 it is a amazing replica straight out of the box and i really recommend going for this DMR. Its body feels really sturdy and strong, it shoots great and just looks amazing. It is the newest but greatest addition to my collection.
I rate everything 10/10 on this replica

super accessory, I enjoy playing with it, the weapon it comes with is very accurate and strong, so far I am completely satisfied. The package arrived in perfect condition, within a very short time. I will order from here again, I am very satisfied.

two of my airsoft buddies got this charger and it is the best one for that price, perfect charger for new players on low budget.
works well on both 11.1v battery as well as 7.4v batteries

In terms of price/value ratio, I think it's worth it if you don't want to spend a lot on a battery charger that can charge both 7.4v and 11.1v batteries. It charges my 1200mAh battery in about 2 hours at 11.1v charge.

It's the only battery I use for my Arcturus AT-AK05. It fits perfectly and has the best shape for the capacity for AK style airsoft replicas.
Careful when using 11.1V as it can damage weaker trigger internals. If you have a mosfet though, this is the way to go, makes the replica much snappier

Its easy to bring with yourself everywhere if you want,fast and safety charge beceause of the little led lights. Its just a charger, but cool.

A very good charger for Lipo/ Li-ion batteries.
The price is also good like always with taiwangun. I think that taiwangun is the best shop for airsoft in europe. The pric's for batteries are also good. I buy 2 Lipo 's and they work fine.

The B3PRO compact lipo charger is an excellent choice for airsoft enthusiasts as well. This charger can be ideal for safely and efficiently charging lithium polymer (LiPo) batteries used in airsoft guns.

Its small size and lightweight design make it easy to carry to airsoft matches or adventures, allowing you to charge batteries anytime and anywhere to ensure they're always ready for action.

The B3PRO charger features several safety functions, such as overheat protection and short-circuit protection, ensuring that the charging process is safe and proper.

However, it's essential to always follow the manufacturer's recommended charging and usage guidelines to prevent battery damage and ensure their longer lifespan. With the B3PRO, you can easily maintain the performance of your airsoft guns, ensuring they're always ready for the next battle.

Does the job well. A fantastic option for your Tamiya batteries, one of these chargers is a must-have for keeping your models powered up.

Offers safety and peace-of-mind when charging batteries, it can be quite stressful and dangerous to charge directly, in my opinion this is the best option for the price!

I bought this as a budget charger and it does what it needs to do, it doesnt have any fancy features etc but it serves its purpose, happy to recommend this to anyone looking for a budget basic charger

This 11.1v battery is totaly fine for price i played 2 games with it one in akm and one in rpk style replica. Both times it held up great didnt overheat or drop down in performance. Would reccommend if you need slim battery.

Good fits my ak 12 well and its powerfull and can hold some power lasts quite a while.

I recommend getting at least 2 products for longer games. For milsim i recommend getting more

The product serves it's purpose. Could use a percentage display. The three LED displays the bare enough information. Recommend to use in a room with adequate ventillation. Product can heat up during use.

I was tempted to buy a Gens Ace 1400 mA/25C but I bought 2 of this instead
for almost the same price. Seems to be a decent quality, well made and properly balanced. Fits very well under AK cover receiver. I can't say anything yet about reliability in time.

Én egy 11,1 V-os akumlátor töltök ami Lipo nagyon gyorsan feltölti és szépen működik is vele minden. Nagyon jó a kijelző rajta hogy látom hogy mennyire van feltöltve az akkumulátor. Ár érték arányban nagyon megérte megvenni nem csalódtam benne. Gyorsan ideért megvagyok elégedve vele.

One of the best battery in the market. Fit all my Arcturus and E&L AK, my Arcturus Ak12K has little space for the battery and it fits perfectly. I've used it for a whole day of gaming and it lasted the whole time. Of course, if you spray the BB like Rambo, you should have a spare battery with you. If you want a good battery at a good price, choose this one.

Works great, fits the small battery compartment of the CM.103.

I used more ipower batteries in the past, and never had any problems with them. I easily recommend to anyone. Best value for proce ratio.

Cheap charger, works well.
Don't expect features such as load balancing or discharging to a better charge for safer storage. Those are more expensive.
But it does the job well.
Definitely buy a LiPo charger so you can see the percentage of your battery before/during/after play.

It does fit my arcturus ak but with very little room left. Gives me enough juice to play all day. It lasts a full day of 8 hours with 1000 rounds shot mainly semy on 1.2j. The T plug fits snug and the battery doesn' swell that much. I would recommend

Fits good for Ak12pe.

Mine was broken, it looks like one of the charging wires broke and wont charge. On the first try in my replica it shot like 3 auto bursts and then stopped. I know people with the same battery brand and they are happy, not my case

Fits in my Arcturus AT-AK04 nicely. Lasts a long time, i have 2 but have never needed to use a spare even in games lasting 4+ hours. Not much more to say, but need to fill the minimal character requirement.

It fits tightly under the cover of an Arcturus PP-19. It's a bit difficult until you bend your wires to make everything fit properly, but overall it's worth it since there's no way this battery will not last you an entire day at the field.

Produkt zgodny z opisem, szybka i bezproblemowa dostawa. Działa bez zarzutów, zapakowany bardzo dobrze, brak jakichkolwiek mankamentów. Jestem mile zaskoczony obsługą klienta i profesjonalnym podejściem. Widać ze ten sklep prowadzą osoby z pasją.

It fits under the dust cover of any rivetted VFC type AK (CM.045, BY-005, etc.) I've played 8-10 hour games with lots of full auto actions, but never had to use my spare battery. I have a strong M110 spring (380-390 fps) and a stock motor.