M8871 Shotgun (Green Gas Powered) - Black [Golden Eagle]

Shotgun muito fixe muito divertida adorei
Portou se bem em jogo tem bom alcance para uma shotgun levanta fácil 0,30
Mesmo com o tempo frio ela porta se bué bem
Sem dúvida que foi boa compra .
Vou experimentar ainda em jogo CQB como se porta
Os cartuchos / mags ela é compatível com qual quer marca

The replica is very good and fun to use. Can take a lot of gas, capable of shooting out 3 shells with one refill which means you can shoot 90 bbs or 30 shots. Basic CYMA shells fit in it so you don't have to worry about not finding shells for it. Can shoot up to 6 bbs but i haven't figured out how to do it, however you don't even need it. Has a nice grouping with .28 bbs.

Delivery was excellent, shipped within 3days. I was REALLY happy for the first 3-4 days. I could barely put it down. It was a beast, groups nicely ,easily hit target at ~35m. Measured over 340fps with 0.25g. I studied gas shotguns on the internet for days, if not weeks, before ordering one, and i learned that these guns are internally very delicate and sophisticated, but not to THIS extent. I ordered it anyway. I repair and service my own,and my friends AEG-s, so i wasn’t scared off of troubleshooting a gas shotty. After 4-5 days , pump arm jams and trigger jams occured a dozen time, and experienced huge fps loss, (~170-200fps with fresh fill) without noticing any gas leak, it still holds gas in the reservoir. After opening the replica for the first time i found, that the tiny spring of the mock bolt and the other spring were mangled up badly, luckily I managed to replaced them with exact size springs. I found that the hop up housing with the srews were broken too (right behind where the outer barrel and receiver meets..brittle abs plastic) I put it together, still shoots ~220fps at maximum :( pump arm now works like dream, doesn’t jam, but the trigger is still a little bit troublesome, and sometimes a hissing noise can be heard from under the receiver, no, not from the buffer tube, nor from the fillvalve. I think its the gas cylinder, deep within. Couldn’t find any replacement hop up housing, except in distant asian based webshops, which are gonna be quite expensive, due to the tax+shipping.I do not want to sacrifice that much money on the project. Now i’m at the point of giving up after the 5th reassembly, and i need to get used to the thought, that i’m having a 150€ worth of a wall hanger, with 70-80€ worth of now useless accesories. This has taken my interest away for life from having a shotgun. Spent roughly 250€ for the whole order, For this money I could have bought a fine mosfetted aeg with spare mags and battery. Maybe I have bad luck, and just managed to get my hands on the worst piece of garbage from night shift at golden eagle hong kong factory. I do not recommend this to anyone, unless you are a tinkerer, and your nerves ar made from steel. Another thing I have to notice that I do not blame taiwangun crew for this disappointment, you guys rock. My previously ordered AEG-s are still in spotless condition after a several thousand rounds.

This particular Golden Eagle gas shotgun is the best model as the buffer tube allows the most gas capacity. Also looks tacticool. Makes a very satisfying noise when racking back the pump grip. Fantastic gas shotgun at a fraction of its Japanese counterpart. You could buy three of these!

Pretty solid shotgun. Not the slightest gas leakage after filling the stock with greengas. The pump action is smooth and easy, and the shells are easy to place. The only downside is the shell release, i would have loved to have it on the righthand side of the shotgun (but eventually you start getting used to it).

Solid structure and no gas leakage from the package. Real feeling weight. Good finishing on the paint.
Not difficult to reload. Would maybe not recommend to smaller/young players due to the size.

This shotgun is a beast!
For the short corners u need to lean in a little bit but its doable and when u hit somebody the will feel it!
I bought this shotgun with a tracer unit from taiwangun and i have to say all the products they are selling are from top quality!
Im gonna buy more in the future from here.
This shotgun is something u really need for ur collection its fun its heavy its everything u will need.

Great! Feels nice and sturdy, almost full metal. Good place for a tank to be in the stock so an easy conversion to HPA if id ever want so. Worth the fun for the price. One issue only that i had is that stock sometimes unlatches in the middle of the game and starts to move, will need to figure it out later on

Just played my first real match with it, and it likes higher weight BBs and high pressure gas. No leaks or strange sounds to be heard, but the kinda useless spring in the magtube is annoying. Works quite well, but and upgrade to a more modern pistol grip would be useful. Stock's ok, but one with a QD socket would be appreciated, even CYMA's springer includes one. Iron sights are good, but very low, and the rail is very short. If you want anything else (like a forward ling mount) on the rail you will have to use a small optic. Pumping can be strange, as the handle is quite far away and has some strangely heavy parts.

All in all a good replica that should really get a modernization upgrade. And adjustable hop-up and smoother action would be great.
And a better stock and pistol grip would be lovely as well.

Just don't forget to refill it between games as a magdump can really empty that small buffer tube.

I just bought the weapon not long ago and I went to fight a bigger building with it and it is very easy to move tactically and I took down a lot of people with it. I use 0.23 g bb with it and I have a holo optics equipped with extra heels. The weapon itself is made of solid material and is easy to handle. I recommend the gun to everyone, it's a very good little gas gun that destroys buildings.

Very good replica, full metal, with no leakages, which is great and unfrequent for a gas shotgun. It can shoot both 3 and 6 bbs per shot, which can adapt to several game situation. The grip of the replica is very comfortable and handly.

This is a very nice replica!. It has a very nice finish, nothing wobbles (accept the M4 style stock). The pump handle doesn't wrattle (like on spring shotguns). It doesn't leak gas anywhere.
The only thing I don't like is the follower in the mag tube - you need to put something inside the mag tube otherwise the follower makes some noise. After two days the shotgun fell out of my lap, barrel first. After that, the gun got a lot of movement between the barrels and main body. But, nothing was broken - all I had to do was tighten two screws that hold the outer barrel onto the receaver.
Also, just in case I bought replacement O-rings and fill valve for it - better to buy them while they are in stock.

So I have this Shotgun for about a year now so I figured that I could review it. The Shotgun is gas powered so there are certain problems that come with it the biggest of that is of course the gas. If I fill the gastank completly (the inlet valve is a little big so expect it lose some gas to the sides when you fill it up) then I can use it for about 3-4 magazines (30bbs per mag) in the tri-shot mode on a normal with a temperature of about 20°C. So the gas performance is not the best but its good, you can also fix this problem and just use hpa instead. So on to the performance: the pump-action is very smooth, it doesn't get stuck anywhere; The spread is not very large, so you can hit targets quite easily if you aim properly; the trigger pull is also very nice and not too hard; The only problem that I have with it, is that the pump-handguard is a little wobbly, everything else is very wel made and also feels like its high quality.