[Set] Per-Fit Holster for more than 80 handgun models - Black [Amomax] + Airsoft Drop Belt Loop - Black [Amomax]

Top Produkt. Das Holzter lässt sich super einfach
auf die verschiedensten Waffen anpassen. Der Gürtelclip ist sehr gut und hält alles an Ort und Stelle. Alles in allem ein sehr gutes Produkt für den Preis. Würde es wieder kaufen.

Notwendiges Produkt, wenn man sein Holster nicht direkt oben am Gürtel tragen möchte, bzw es lieber etwas tiefer mag. Durch die verschiedenen Montagemöglichkeiten lässt sich alles gut anpassen. Allerdings gibt es einen Design Fehler, welcher beim Anbringen des Holsters am höchsten Punkt, das Einschrauben der Schrauben zum Befestigen unmöglich macht.
Hier müsste definitiv nachgebessert werden, was mit einer Bohrung an der richtigen Stelle relativ einfach zu bewerkstelligen sein sollte.
Die zwei unteren Befestigungsmöglichkeiten funktionieren aber einwandfrei.

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

its a nice holster with good amount of drop to make drawing your pistol very smooth and comfortable.
one problem is that because the bottom part is sticking out?/floating and the leg strap pulls it in, if you wear it a bit tight on your leg and run around like crazy the bottom 2 bolts get a bit loose and starts to wobble. it hasnt broke or fail yet but i had to move the position up and put some padding underneath to prevent it from happening again.

Drop holster platform that you can add to your battle belt or service belt. It feels robust, and has 3 different height settings. The strap is somewhat elastic and the inside is rubberized, both help the strap stay in place when running. It is easy to attach an amomax holster to the platform.

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Ordered this one to go with my GLOCK holster.
Allen key was included, although the one I had was too small.
Amomax always delivers. Good quality for a reasonable price. Delivery service from Taiwangun is excellent. With UPS to Holland within 3 days

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

Great adapter i use it with a combat belt although it needs a but of force you can mount it on fitting is nice i can only recommend during games its not in the way its just sits on your leg and thats perfect

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

Works perfectly! I used it with Hi-Capa 5.1, which is a fairly long handgun, and it was so much easier to get it out and back in the holster. Makes you want to use your pistol more.
It didn't limit my mobility while running or couching.
Great piece of kit!

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

Comfortable, sturdy and zero movement while running, crouching or prone. Also very easy to mount my Swiss Arms G17 holster to. Definitely a recommended purchase. Just make sure to put the buckle on the back of your thigh or the back side of the holster to prevent it from 'poking' you whilst taking a knee.

Product Review: Amomax Drop Belt Loop Panel

The Amomax Drop Belt Loop Panel is a budget-friendly solution delivering commendable comfort and versatility. While maintaining Amomax's trademark quality, it offers a secure fit with a silicone-lined thigh band, ensuring stability during movement. The precision design accommodates various holster positions, though a minor design flaw arises when attaching at the highest point. The two lower attachment options function well, making it a solid, affordable choice with room for slight improvement.

Have been thinking about buying this for a long time. I finally did and it did not dissapoint!

The usual great Amomax quality. Highly adjustuble, both the mount up-down, and the thigh-band circumference.

The thigh-band has silicone on the inner side, so it will not twist and turn while you are moving.

I use it with a CZ holster, and a Glock holster from Amomax. Very satisfied!

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

Great product like most things from Amomax. High quality, fits my holster perfectly. I bought it because paddle holster is too high and drop leg is too low, and this provides a perfect balance between that. You don't have to bend sideways to unholster, just extend your arm and you can reach your pistol.

However, the provided wrench was too big to remove the screw from my paddle holster - small oversight. The strap around the leg is also on the shorter side. For me it was fine, but if you have very thick legs then it might be a tight fit.

Fits the amomax holsters well, and with proper installation, doesnt wobble or rotate on its own. The holster height is adjustable and has a few levels to choose from which is really nice if the base configuration is too low. The thigh strap has a very nice rubberization and doesn't chafe or ride up/down. Even though it says Drop in the name, it isn't a drop leg holster. This is a good purchase if high-ride or drop leg holsters aren't your thing. I don't know if it was intentional or not, but mine did not come with the screw that locks the holster into place. The screw from the paddle mount, however, works just fine. 10/10 product would surely recommend.

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

Perfect fit.

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

After some fiddling with the strap I got it properly set up. This solves the problem with belt holsters sitting too high on your body. But this also solves the problem with drop leg holsters sitting too low. It’s very easy to set up and doesn’t jiggle

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

This is the perfect case for me. This is exactly what I was looking for. I saw something similar in many YouTube videos and I was looking for this type, which can be attached to the thigh at one point. I use it with EMERSONGEAR cobra belt. Good use of materials. I can only recommend.

Find this to be a great holster, since its a superior alternative between a Belt Gun Holster and the Dropleg Holster.
It sits more firmly, is easier to reach (at least from my experiences) and looks pretty great.
When you are buying it for non Ammomax Holster should properly work as well.

Bought to be added to the Amomax Per-Fit holster, and it really changed my way to play !
Once adapted to the body’s dimensions it allows to move easily if you have for example an heavy plate carrier with many pouches close to your belt where you usually put your holster. And on top of that, the movement to grab the handgun becomes more simple.

Avevo la fondina universale della Amomax, ma infilarla alla cintura con alcune repliceh mi risultava scomodo, per questo ho preso questo aggancio che permette di portare la fondina, in maniera regolabile, più in alto o in basso.

Facile montaggio, facile aggancio e materiali buoni. Consigliata, da abbinare alla fondina universale

I used to have a drop leg platform holding my sidearm but always felt like it was wiggling around and pulling my pants even though I had a free duty belt connected.

This product sits so nicely and barey moves when running, a must have if you want a lower than belt holster

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

I am in love with the brand amomax! It is strong and made with quallity, easy to attach to your belt. the holster does not irritate your hip and is the perfect height for me. I don't know if it will make me play better, but it just looks super cool!

The hip drop is great combined with the swiss arm adapdx its perfect
Pro: As a short person like myself it perfect.ive a leg drop too and it hits the back of my leg when im running.this one has my pistol at a spot on hight and is very comfortable and looks great
Con: None

Alright, so hear me out on this:

This combines the best of a drop belt holster and a belt-mounted holster.
I attached my multi-fit holster to it and it fits the holster perfectly.

pros:
+ your gun doesn't flop around as it does with a Dropleg holster
+ should fit with all of the Amomax holsters (I can confirm that it fits with their per-fit holsters)
+ you can adjust how high up or how low down you want your holster to sit

cons:
- I cannot think of any tbh

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.