[Set] R32 Sandstorm [Army Armament] + Per-Fit Holster for more than 80 handgun models - Black [Amomax]

Top Produkt. Das Holzter lässt sich super einfach
auf die verschiedensten Waffen anpassen. Der Gürtelclip ist sehr gut und hält alles an Ort und Stelle. Alles in allem ein sehr gutes Produkt für den Preis. Würde es wieder kaufen.

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

Amazing pistol for a very low price. Blowback is equal to or better than i.e. the AAP01. Nice and easy removal of the slide to adjust the hop. Great air seal, smooth trigger and fits perfectly in the Amomax per fit holster.

Very solid replica for both beginners and more experienced players.
Great feel and weight to it + rate of fire is consistent. Shooting at approx 83m/s on 0.25g BB’s.

Also looks amazing and handles it job even as a primary on CQB

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

I've always wanted to get into Airsoft and have been scrolling through Taiwan Gun's offers repeatedly over the last years. During a sale, I finally decided on the R32 Sandstorm, and I wasn't disappointed. The pistol is very well-made, has high performance - and it looks damn good too! The R32 is almost entirely made of metal, and the strong recoil and high weight make it feel great to shoot. Overall, I'm absolutely convinced by its handling - from the slide to the magazine release, everything feels and feels so smoothly. Additionally, it's easy to mount a suppressor or tracer unit. Perfect for getting into Airsoft, but I'm sure it's also suitable for professionals. Now im thinking of stepping more into Airsoft and getting something bigger from Taiwan Gun... This page is very reliable and the prices are very fair.

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

Received my order within the timeframe I was given which was 7 working days, everything arrived in perfect condition, this is a very well built product, all metal as described which feels fantastic,especially for the price,haven’t put many bbs through it yet, only two magazines but so far no problems, great power very accurate, will be purchasing more products from Taiwangun as everything has been easy and efficient and they have a lot of great looking products in stock

I bought this replica because i wanted some extra after using electric guns for 2 years, and i can only say that this was a good idea due to the fact i thus pistol is very good for this price. The only thing i recommend to change is the hopup, because somethimes in my latest games it wasnt like before. The outer material is mostly steel, and the inner materials are good too.

I have already tried my friends R614, and that wasn’t much better due to the teo replicas price. And one more thing, when you thighten the screw at the bottom of the magazine do it gently or else it will brake, this already happened to me.

I think this replica is pretty good, i recommend it to everybody.

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

a very good replica; beautiful colors, good materials, feels and fits good in the hand
the blowback is nice and has a bit of kick
the fiber sites are amazing if it is a minimum amount of light
for the price, it is an amazing replica

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

What i can tell i have R28, so i made decision and go for this R32 sandstorm version. Army armament quality is very good, there is step up in quality from R28 /which is very good gun/ to this R32. Colour is looking very cool. I used standard 1911 magazines without problems - only with short base magazines /not extender/ - you should grind part of gun /5min of work :D/. Overall - cheap magazines, accurate and great looking gun.

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

The slide operates smoothly. the threaded barrel fits most barrel attachments. The mag feels heavy duty and is nice and sleek. The standart iron sights are highly visible and accurate. The grip feels amazing in the hand and i have large hands so it is difficult for me to find something that feels good. The safety feels secure and the kickback feels great!

Definitely worth it for this price!

From the first day the slide was a bit wobly. On the sixth game pistol fell off on the tarmack from my pistol holder. After that I noticed that fireing safety lock on the grip does not work properly anymore. At home tried to clean pistol, took slide away. Slided plastick piston away and some plastick bits fell out...and now if I put magazin in. It goes full auto, no need press the trigger anymore. 100% not full metal inside. Cheap made thing for the moderate money... no more pistol purchase from Army Armament.

One of my favorite m1911 replicas, they price is low and the quality top notch!
Me and 2 other friends use these (in different colors also) and we're very satisfied with the replice. Ask has cheap magazines and never have any issues with them.
I really recommend this if you're looking to buy an M1911 replica

Absolutely brilliant quality at such a low price. You won’t find a more reliable gun for such a low cost. Perfect first GBB and couldn’t recommend it more.

Brilliant build materials.
Great attention to detail.
Great fibre optic sights.
Amazing accuracy

Only con is that the trigger has a small bit of wobble but other than that a completely solid gun

Pro (+) :
- amazing design, that look is a killer with the extended Magazin base. The color is better in real than on the picture
- the replica has a great kick and the build quality is very good and steady.
- the grip fits so well in hand.
Con (-):
- the weight could a bit annoying if you carry it long and I've got other 1911 lighter than this one however it is the weight gives a more realistic kick and the gas consumption is ok so not a big issue
- the mag release button is a bit too big so i lost my mag few times using it during games but you can get use to it

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

1A processing The 1911 version is great and is in no way inferior to other manufacturers. The Army Armament brand is simply great. Some of us in the club already use it and everyone is just more than satisfied and can only recommend it
Whether you are a beginner or a professional, this is exactly the right thing

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.