[Set] R32 Nightstorm [Army Armament] + Per-Fit Holster for more than 80 handgun models - Black [Amomax]

Die Pistole sieht gut aus
Liegt gut in der Hand
Gute Verabeitung
Die Trefferqualitaet ist nicht die beste , relativ grosse Streuung
Für den Preis aber ok denke ich
Der Hersteller sollte an der Zielgenauigkeit arbeiten um diese zu verbessern
Die waffe hat untypisches Streuverhalten ich denke das die Gaszufuhr nicht gleichmaessig erfolgt und so die kugeln so manchmal starke Abweichen.
Ich habe mehrere airsoftpistolen von Taiwangun gekauft die ein gutel Trefferbild zeigen. Ich gehe davon aus das Diese Waffe ist aus chinesischer Fertigung ist ,

Top Produkt. Das Holzter lässt sich super einfach
auf die verschiedensten Waffen anpassen. Der Gürtelclip ist sehr gut und hält alles an Ort und Stelle. Alles in allem ein sehr gutes Produkt für den Preis. Würde es wieder kaufen.

Really nice quality gun for the price, the fibre optic sights, ergo grip, thread adapter and extended mag are all features of much higher priced guns. It feels solid and shoots really nice. My only gripe is the trigger is a tiny bit wobbly but apart from that its a first class sidearm.

Ergo Grip
Thread adapter included
Extended mag
Fibre optic sights
Solid build
Feels very good quality

Slight wobble on the trigger

Nagyszeru termek, nagyon kenyelmes, asp xtp-hez hasznalom. Kicsit jatszani kellett az allitgatasaval de kivaloan mukodik! Az elso jatekon ahol hasznaltam mar meg is mutatta hogy mennyire hasznalhato es kenyelmes, raadasul jol is nez ki! A rantas gyors es zokkenomentes, stabilan tart a tok! A szallitassal is minden rendben volt, asszem 3 nap alatt kezhez is kaptam!

Nice holster. Adjustable width , works fine with my guns. Only downside is that you can pull gun out if you twist it, however that shouldn't happen naturally during game play. it comes with the belt module which seems to work fine, other accessories are available like molle mount, beltclip and drop leg.

Great gun holster it fits cyma 125(without rail) cyma cm 126 and even novritsch ssp5(tested myself). It fits great on any belt and the pistol sita in right away and irs really good fixated.i can only recommend to buy this especially for cym cm 125 because it is hard to find a good holster for usp replica.

Great pistol overall.

In my first game with the pistol it held up reallly well and shot reliably at 10 degrees celcius. With the included magazine I could shoot around 45 bbs before needing to refill the gas in the magazine.

I would give it 5 stars, if not for a few nitpicks:

1. The included muzzle device came off while using the replica. (May just be me not screwing it on hard enough.)
2. The ejection port cover started showing scratch marks after use, and there were some deeper grooves that, I assume, came with the replica, since they were painted over.

it does an excellent job! if you need, a pistol hostel this one is definitely one to concider

Excellent! I was a little worried that it wouldn't be compatible with my penknife, but it works flawlessly. It doesn't even wobble. It will be very good for 1911 replicas, and if the description of the replicas includes this holster as an option, then it will be compatible.

Really beautiful replica! My friend helped me pick out a pistol as I have been wanting to get a replica of the 1911 for a long time now. I can confidently say that it shoots super well and the blowback is super satisfying! Gonna be bringing it to my first-ever airsoft game within the next week and hope to be having a great time!
The thread adapter however is a little hard to use as the adapter likes to get lose when screwing something on it as it goes the opposite way but outside of that it's lovely!

I bought it for my JW4 TTI, and it fits like a glove. It's a great and very durable material; taking out the pistol and putting it back in is very smooth.
I am wearing it on the front of my plate carrier, and it is comfortable.

Bough it for my SSP5 and it fits perfectly, I've tried using it with different pistols and it just works. All you need to do is adjust two screws with an allen key that is included and there you go. Holds the pistol very firmly and there is no chance of it falling out. The only thing that somewhat annoys me is that whenever I holster my pistol it scratches the surface inside the holster and leaves some of that scaped surface on the pistol, but all you have to do is simply wipe it off.

Kupilem ten holster do SSP5 od Novritscha i pasuje bez problemow. Wyprobowalem tez go z innymi pistoletami no i tak jak w opisie, pasuje praktycznie do wszystkiego. Jedyna rzecz, ktora jest czasami irytujaca, to to, ze gdy chowamy pistolet do ladownicy moze on zdzierac troszeczke materialu od srodka. Jest to co prawda minimalne zdzieranie ale moze dostac sie to do lufy. Poza tym mega polecam, bo po co kupowac milion ladownic na pistolety skoro mozna kupic jeden, ktory bedzie pasowac to prawie wszystkiego.

The `XTP XTREME TRAINING PISTOL` fits this holster perfectly. This is probably the best holster out there. Note, you'll need a molle adapter if are going to attach it to molle equipment - vest, belt, etc.

nagyon jó minőség , jó ár érték arány . r32höz kíválló
very good quality, good value for money. R32 Exceptional

Excelent items, verry nice and quality and fast delivery. Taiwangun it is the besst!!!!!!!!!!!!!

Great quality! Feels sturdy!
+ Highly adjustable
+ Fits (probably) ANY side-arm (within reason)
- May damage the paintjob on the side(s) of the slide of your sidearm, BEWARE
Especially GLOCK-type pistols may experience damage to the paint on the corners of the slide when holstering and unhostering the weapon multiple times.
This may be fixed with electrical tape or foam, but beware!
Overall great product and good quality for the price!

I bought it for Army Armanent R 604. It fits perfectly, The lock does not allow them to fall out, but the button is easy to use. It fits you very well and you can hardly take it off. It can also be easily fitted into trousers. The holder can be rotated so it can also be mounted on the chest. it doesn't come out like that.

Full metal construction and strong blowback makes shooting very satisfying.

The assembly quality is good.

I chose it because of the many extras:
- 30 BBs extended magazine.
- Extended magazine release.
- Front fiber optic sight.
- Rear fiber optic sight.
- Magwell.
- Texture pistol grips.
- Rubber finger groove insert.
- Silencer adapter with 14mm CCW thread.

Green gas and CO2 compatibility so it can be used in temperatures below 10°C (50°F) too with a CO2 magazine. Green gas magazine is included, CO2 magazine can be purchased separately.

It is accurate and has good range with 0.28g BB.

Bought it together with ST23 NON-BLOWBACK Heavy Weight Gas Pistol [STTI] and overall great purchase for the price.Only thing to take into account that for bigger pistol replicas with silencers even after adjusting - can not fit

Really nice spring-based mechanism that easily adapts to a lot of different pistols sizes (I tested a G17, AAP-01 and 1911), all tested ones fit without any wobble. All you have to do is loosen or tighten two screws depending on the width of the slide.

Extremely high quality. Nice weight and came without any damages. Haven't field tested it, but from plinking in the backyard, has a really good kick and the hopup unit has been working with 0.25s flawlessly.
It was already well-greased from the box but I opened and re-applied a healthy dose on the moving components.
Love it.

I bought the holster primarily for a mk23, but it really accepts a lot of pistols. For example fn 5-7, sig p226, 1911, hi-capa, glock variants, etc. The mk23 is a bit cramped in it, but it's not disturbing. Regardless, I can quickly take the pistol out of it and don't have to strain to put it back.

This holster is Superb !
Its the second being bought.
The first one did fantastic job protecting AAP 01 as my bro fell on it(+100 kg!!!)
The holster catch broke but the pistol was unschratched and undamaged.
Its still holds pistol but with no catch.
So for a small investment u protect your gear.

Probably the best holster available for multiple Guns. I tried 4 different ones and because you can adjust it, they all fit. Very happy with it and will buy exact same one if it breaks. Which probably won’t happen because the plastic is sturdy but not stiff and has minimal moving parts

I bought this pistol a few weeks ago and i have to say i am very satisfied with this product.It is very accurate with a consistent fps and is very reliable.It is also very easy to maintain and service from my experience and for the cost it is the best secondary i ever had.I highly recommend this product!

I am satisfied with the range, about 50m, the replica is all metal, it has a strong recoil, with a capacity of 30bb in the magazine, you can do a lot, the replica is very comfortable for small or large hands, it can fit in any 1911 holster with a rail, I I prefer (big dragon ambidextrous adjustable tactical holster) it fits a flashlight, the magazines are durable with one charge of gas, you can shoot 40 to 50bb, it can be loaded quickly with an extended magazine because it has a nice grip and is not slippery, various silencers can be mounted on the replica and lamps.

The R32 NightStorm by Army Armament is an exellent gas blowback sidearm for you. You can't find a better full metal replica for this price. When it comes to perfomance it is decently loud and has an max accurate range of 35 metres with 0.2 bbs. Best thing about this replica is it's extended mag of 30 bbs meaning you can hit a lot of targets without having to reload. Their mags have a long life if you know how to keep them and they last about 45 bbs before having to refill the gas again.

Had a couple of games with it already and I highly recommend this replica to everybody. Shoots great, performance even better. With one gas filling you can shoot ~1,5 magazines. Though I only used it in CQB, the range and accuracy seem to be similar to any other more expensive GBB pistols. Externally speaking, the gun is pretty heavy, feels solid, does not wobble at all. The recoil and sound are on point as well. If you need more mags, go with the one that came with it (1911 extended magazine with base pad) as I had issues with the shorter ones.
10/10

This holster is my favorite out of all. I had a little bit of fear concerning the steadiness of the holstered weapon, but it is prooven that I shouldn't have done so. It is easy to adjust, comfortable and holds the pistol in place. I have a Beretta M9, but I'm pretty sure it would take also Glock or 1911 platforms. Its material is good too, I don't think it will break during any of the games.

Excellent choice if you have pistols. You can use an Allen key to make it more tight (for thinner pistols) or loose (for wider pistols).

After some initial loosening, the KJW MK1 (Ruger/Nambu replica) can be fitted (though it can move a little up or down inside, but would not fall out), if you loose it more, the CYMA CM.127 (Glock 18C) and even more it is enough to put the STTi ST23 (MK23) in it, without the silencer.

For the price, you don't have better options. It is good, well built, and not that bad accuary. The magazine doesn't leaking (im using an another r32 for a year now). I can recommend it for sure.
Im using it with 0.28 but i can recommend 0.3 for use. Better range and accuary.

Great Holster that fits both of my Airsoft Pistols,

my random Amazon (probably Umarex) M9two Spring-Pistol, and my Cm.030 G18C. First couple of times, getting the Gun of the holster is tough, but you will get a feel for it, and it gets easier.

Cant go wrong with this one, if you own a CM.030.

What a great thing! If you are using multiple handguns this holster can hold -almost- all of them! Fit: Glock, Hicapa, Beretta, ICS BLE, aaaaand even AAP01 very well! Plus you can attach to any plate. In short excellent product, I would recommened to anyone!

This is a solid Product. Simply adjust the width of the hole with the two screws to the chosen pistol and it fits.
There are plastic leaf springs in the holster to stop any wobble of the pistol and adjust to any pistol.
It worked good with the AAP01.

The included belt paddle works fine with battle belts of any kind.
I have a battlebelt with molle, and you just have to loop the normal belt over two molle slots and the paddle fits solid.

Very happy with this. Fits my G19, hicapa, and AAP01 with a good snap. Does not fit the Mk23 or the 6" revolver, but that shouldn't come as a surprise. Paddle holster is stable and can be swapped out.

A really good replica that will outperform the competition in this price range.
with one charge of green gas 1 and half mag with 0.2 bb
the outer barrel is threaded in 12 mm CCW (anti-clockwise) and sold with a 14 mm CCW silencer adapter
great details:
- optic fiber sights
- rail

Great holster, easy to adjust to fit many pistols. I use it for my ICS KORTH but I have tried it with other pistols too. You adjust the fit of the gun by turning the hex screw on the side with the hex key that is provided wich is much appreciated. Fits well on a belt.