[Set] Licensed STACCATO 2011 C2 pistol replica - Black [EMG] + VictOptics V3 1x22 Dovetail collimator sight - black [Vector Optics]

Very nice gun with a very tactical and robust look. Powerful, balanced and ergonomic weapon. You can tell that it is very well manufactured and with good materials. It arrives well packaged and fast shipping.

Brightness and size were great, the parallax not so much. Also the battery has a tendency to get loose when the scope is used on a GBB. Also the lens can be easily scratched even then the screws that come with the reticle.

Got two because at the time this was the cheapest red dot that would fit the mounting plates on two pistols and they exceeded my expectations. The glass is clearer than my JJ and TE pistol red dots both of which are more expensive than this one. Also on this one the dimmest setting is dimmer and the brightest setting is brighter. Both fit perfectly on the pistol plates I had. Haven't tried the 11mm mount so can't comment there. One has about 50 rounds and the other one over 200 on green gas blowback slides and no problem so far. The only thing not great is that instead of + and - buttons there is just one but that is just a minor inconvenience - you can turn it off at your preferred brightness with a long press and then it turns on back on that brightness so it is not that bad. The protective cap is rubber so if you have a rear sight behind, it is easy to cut a notch in the cap to fit. The linked products on this page also show the mounting plate geometry so you can double check if it is for your pistol or not - good job on TG for providing that.

It's snappy, looks realistic, feels good and is compact. Exactly what it looks like when you order. Decently priced too.

I used it for plinking. Heavier bbs seem better for precision.

I wasnt able to fit my holo sight on it with the plate that came with, which was dissappointing.

But otherwidr good.

Finding a high-quality red dot sight for a 11mm dovetail rail is often a frustrating task for airgun and rimfire enthusiasts. Most premium optics are designed exclusively for Picatinny systems, leaving those with classic dovetail mounts to rely on cheap, flimsy adapters or low-tier sights. However, the VictOptics V3 1x22 is a true diamond in the rough. It is one of the very few dedicated dovetail red dots that actually delivers professional-grade performance without the need for bulky converters.

The build quality is surprisingly robust, featuring a crisp 3 MOA dot with multiple brightness settings that remain visible even in bright daylight. The 22mm lens provides a clear, wide field of view, and the elevation and windage adjustments are tactile and precise. What sets this apart is how securely it locks onto the 11mm rail; there is zero wobble, and it holds zero perfectly even after repeated use. If you are tired of compromising with subpar optics just because of your rail type, this is the solution. It offers a sleek, low-profile design and reliable electronics, making it easily the best dovetail-ready red dot currently on the market.

Great red dot mounted on my JAG Arms Sand Viper replica. Attention! It is sold in a kit with the R615-1 TTI sand viper pistol but the screws do not match! Luckily I found a couple at my hardware store and mounted them. For the rest, great sight complete with cover in case of non-use

These latest AA releases are much higher quality than the previous ones, the T8 collab parts make a big difference. Good slide-to-frame fitment, no rattle except a little on the mag, on par with TM when it comes to quality & finish. Shoots accurately out of the box, 320-330 with a Maple Leaf decepticon and 6.02 inner barrel.

The only downside is the incorrect placement of the flag on the lower frame, and that the barrel is a bit light-weight and not crowned, but for the price that's easy to overlook.

Look and feel is amazing!

Nice weight, mag seems solid! No leaks.

Generously lubed, had to replace it with an actual lubricant and not the silicon oil that was on it. Its operation is extremely smooth. I havent gamed with it yet but shot with it plenty and i can do at least 2 magfulls of bb's. But probably in a bit colder weather you could at least complete a whole mag. Trigger is crisp. Trigger is not as crisp as the Pit Viper from army armament, but still good. The slide from this also works on the pit viper, but not vice versa for those wondering.

A tip, bend the hop tensioner so that the bucking presses flat on the bb, took a few tries but was easy and well worth it. Slide is slightly grey in hue, like the real staccato. Very nice markings. I am very satisfied. Well worth the prize.

An officially licensed replica of the Staccato C2 pistol from Army Armament, with components from 6MMProshop, at a really ridiculous price considering such high quality - even including shipping costs to Ireland.
It's time to waste some BBs... :)

I bought this reddot for my GBB pistol, an Army Armament R501 with custom mounting plate.
It is absolutely amazing, the lens is clear and the red dot is bright, perfectly usable even in daylight.

I also have a picattiny mount for it, it looks pretty sick on my M4.

The optic is very high quality made and sturdy, easy to use, with almost no parallax.

I can really recommend this reddot sight, TaiwanGun even sells mounts for it, it is a perfect sight to use over a scope, at 45°angle or even as a main optic.

The sight itself without a mount is only 28g heavy, it is very light.

If I'll need another compact sight I will definitely buy another one.