[Set] WE06 ROF 30 rps, ETU burst mode, binary, precocking [WELL PRO] + Battery Li-Po 1200mAh 11,1V 20C - Deans [IPower] + Charger IP3025 - LiPo/LiF...

Good charger, shows when battery is full, can choose from 3 types as seen in the images, comes with good instructions and charges batteries well. Comes with adapters for batteries without a balancing connector wich is nice

Fits perfect into my ares scar!

Its hard to find batteries for airsoft that have enough mah and that also fits in your replica. Taiwangun always have the solution for a very good price. This battery fits perfect in my ares scar what really have a small battery pocket.

Works really good... Fits for AK platform and in my MK18, but I have to pull out the stock a little bit for more space! It easily fits in the stock tube. The price is acceptable, don't think you'll get it cheaper on other places.

Der Akku macht bisher was er soll. Er ist ca. 18 cm lang (ohne Kabel) passt aber dennoch gut in meine Ak12. Power und Leistungsabgabe sind wie bei meinem anderen Marken-LiPo, also kein Unterschied. Würde ich mir definitiv wieder kaufen.

This battery shape fit AKs (Altough I tried on CYMA, I think on other brands aswell), they drop in without issues and plenty of clearance in the mock gas tube and sightblock.
This one provides enough to make the replica run fast and smooth.
I would've preferred a longer variant with more amps, just get a couple more and fit them in a LiPO pouch.

It works, it didin't impresed me, but it's okay. The price-value ratio is not bad, but if you need a more professional charger defenetly can't recommend this one. If you are satisfied with a simple, cheap charger, it designed for you.

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

just perfect. good size and cheap. it also lasted a half day game with regural use without dying. it charges quickly with a smart charger and is very reliable only con is that the cable fits a bit too loose on the deans connector but it still works without flaws i also recommend only using it with an ETU or MOSFET as it could burn out trigger contacts fast

Erős akkumulátor, feltöltés után majdnem egy egésznapos játékot kibírt nekem. De nyílván ez attól is függ hogy milyen játékmódot játszik az ember és hogy milyen gyakran lő. Árához képest nagyon erős és jó akkumulátor

I’ve been running these 0.23g PROSLICK BBs as a kind of “middle ground” ammo in a few different AEG setups and they’ve honestly been pretty solid overall. Feeding has been smooth in all my mid-cap mags so far, no jams or weird inconsistencies, even during faster paced CQB games. What I like about the 0.23g weight is that it sits nicely between speed and stability — a bit more stable than 0.20s, but still snappy enough for close and mid-range engagement.

In terms of flight, they’re surprisingly consistent for the price. I didn’t notice any obvious flyers in normal outdoor conditions, and hop-up response felt predictable once dialed in. The bag packaging is also practical, easy to pour into a speedloader without spilling everywhere, which is a small but useful detail on game days.

For casual skirmishes or as a budget-friendly primary BB, they do the job really well. I wouldn’t call them “premium competition grade”, but for regular gameplay they’re definitely reliable and easy to recommend.

The iPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a compact and reliable power source for airsoft AEG replicas. Designed as a 3S LiPo pack, it provides strong and consistent voltage output, which results in improved trigger response and a faster rate of fire compared to standard NiMH batteries.

In use, the 1200mAh capacity offers a good balance between size and runtime, typically lasting for a full skirmish depending on the rifle’s setup and firing style. Its slim stick design makes it ideal for tight battery compartments such as AK dust covers or buffer tubes in M4-style replicas.

The 20C discharge rate ensures stable current delivery, which helps maintain performance even during rapid firing. The pre-installed Deans (T-Plug) connector is also a strong advantage, as it reduces resistance and improves electrical efficiency compared to older connector types.

Overall, this iPower battery is a solid, affordable choice for players looking to upgrade to LiPo performance. It is especially suitable for intermediate users who want better responsiveness without sacrificing compatibility or reliability in the field.

Great and reliable battery that performs consistently and holds charge well during extended use. It fits AK replicas quite nicely and is actually more compact than expected, making installation easier in most setups. Compatible with brands like LCT, CYMA, and E&L, where it sits securely without modification. However, some gas tubes can interfere with proper placement. In particular, certain 3D-printed handguards tend to have a smaller gas block diameter, which can prevent the battery from fitting through. With standard handguards, though, it works very well and remains a dependable choice overall.

A really nice battery. First perfectly in my LCT AK 105. I could use it for a whole day without charge. When you use a lot of full auto it will probably not last a whole day tho. No bad things to say about this battery.

It holds energy well and releases it. It fits perfectly into the narrow battery holder of the Arctarus AK12. I also tested it on an Arctarus M4 CQB and it fits perfectly into the buttstock.Unlike other accumulators, there were no problems here during play because arctarus replicas are sometimes sensitive to the accumulator.

Its a good battery for the price. I have another type of battery from this manufacturer and it does a very good job. This is powerful and its safe. You have that new type of T connector on in, it goes good with specna replicas.

Excellent value for money! I love that it supports LiPo, LiFe, and NiMH batteries, so I don't need multiple devices. Compact, easy to use, and 3A charging is fast enough. The LED indicators are clear, highly recommended!

I got 2 of those chargers they are user friendly, they are really good and fast chargers for three different types of batteries ( LiPo, Life and NiMH ) my battery is LiPo and it got charged really really fast

Unfortunately, I've had problems with this charger. The one I received wouldn't charge either my 11V Lipo or 9.6V NiMH batteries, always indicating they were fully charged after a few minutes. Fortunately, Taiwan's customer support is excellent and acknowledged the problem and gave me a full refund.

The IPower Li-Po 1200mAh 11.1V 20C battery with Deans connector is a great choice for airsoft. It delivers solid performance, providing reliable power for extended gameplay. Compact, durable, and easy to install. Highly recommended!

Very easy-to-use charger. I can charge all my batteries with it, and the settings are very simple. It charges incredibly fast, making it perfect for quick recharges and keeping everything ready for use.

Compact & light, a lovely rifle for when the mission requires extra discretion and mobility.

One thing though: the ETU will enter "sleep mode" after 60 minutes of inactivity and the gun will need to be power cycled in order to shoot again, so beware if you are into milsim.... I solved this by adding a microswitch to the battery wires and trigger the switch every time I pull the charging handle.

I have bought 2 of them one for me and one for a friend.
You can charge all types of battery's airsoft replicas use ,so you are really flexible with these chargers.
Never have overcharged i battery or any problem of any type and i have been using mine for over 3 years by now .

Good charger, suitable for many batterie models. I personaly use only LiPo and can jugde only my experience. Charging takes about 1 hour. Charged my 11V LiPo to 12.4V and 7.4V LiPo to 8.3V.
Don't know about accuracy of these numbers (was measured by Security Alarm for LiPo Batteries). If these values its true, batteries will have good output voltage.

Charger IP3025 - LiPo/LiFe/NiMH 25W/3A [IPower]
It is a good quality battery charger. Not get warmer on the charging periods, and has good performance.
Would recommend it!
I use it with LiPo Batterys

perfect battery for ak use, fit with no problems and gives a new life to your replica. good quality connectors and eletrican wires. i got this for backup and ended up using it as a primary since i feel its faster to respond.

Perfect! I ordered this and tried them out, and they fly perfectly. They work really well with my CM.515. The 3000 rounds will surely last me a long time, as i mostly use semi-auto for skirmishes. The lid also makes it perfect for sealing or pouring them into a speed loader, therefore making it comfortable to hold anywhere. I recommend these.

Works great and charges fast, its a decent charger and seems sturdy enough if you take it with you on the go. A paddad gunbag or a hard case and of you go... have no complaints for this item and i'm happy with my purchase

It's a really good battery as a main or a back-up due to it's really slim design. It lasts a good bit and it's perfect for AK type replicas. I'll probably end up buying another one in the future just to keep in a bag when I'm in a long match. Buy 'em, they're great!

excellent bbs for a perfect game

they are very durable even in the most powerful airguns
very smooth and accurate shots with these bbs in perfect weight

also the price is quite good considering the quality and the packaging contains quite a lot so you won't run out of ammo easily bravo

super accessory, I enjoy playing with it, the weapon it comes with is very accurate and strong, so far I am completely satisfied. The package arrived in perfect condition, within a very short time. I will order from here again, I am very satisfied.

very lightweight, the mosfet is something special, some very fast and unique ROF, drawback of this is that you lose joule/fps compared to the standard version. range and speed is perfect for cqb but outdoor its a more mehh option. good sidearm or if you want to move up really fast.

only misleading thing is that in the description it states 300fps and recommended ammo is .23 or .25, but the 300fps is only gained with the .20 ammo.

The charger works flawlessly. Charges batteries quickly and is easy to use. It’s very reliable and has multiple charging options. Very satisfied with the purchase, as it has never let me down. The design is compact and user-friendly, making it a great addition to my charging setup. Highly recommend.

Very simple and good charger. It had no problems since I bought it. One thing is when once I charged a NiMh, it got really hot, not sure why. I would buy this insted of the expensiver ones, couse it does it's job with no problems

I just started playing airsoft and was interested in a lightweight SMG and saw this.

I played my first game with it and absolutely loved the feeling of it. Very easy to handle in close combats but also on longer distances. Even the people that has alot more experience than me was very impressed with the feeling of both the motor and the body of the replica.

+Very sturdy body even without the full metal version!
+easy programmable MOSFET
+cheap high quality replica!

Great out of the box replica, snappy and amazing rate of fire 26/27 bbs whit a 11.1 20C, the power is 0.92J whit 0.25g bb the only trowback are the magazin, the feed no problem but are only 80bb

The replica is amazing for its price.
It performs great, the trigger is very sensitive and its fairly accurate.
For being all made out of polymer it feels very sturdy and it has zero wobble, its also light enough to be used one-handed.
The battery space is enough to fit even bigger stick lipos even if a little tightly so i would still recommend the slim ones.
The only minor defect is that the stock when folded covers part of the trigger, making it a little harder to shoot with full finger gloves but its not very troubling,

It's the only battery I use for my Arcturus AT-AK05. It fits perfectly and has the best shape for the capacity for AK style airsoft replicas.
Careful when using 11.1V as it can damage weaker trigger internals. If you have a mosfet though, this is the way to go, makes the replica much snappier

This charger is very cheap.
I charge my two 7.4v lipo batterys and charge realy fast. It is very easy to use some click and done it.
Qualitate is not to outstsnding but okay.
But my friend caught fire with the first charge.

This 11.1v battery is totaly fine for price i played 2 games with it one in akm and one in rpk style replica. Both times it held up great didnt overheat or drop down in performance. Would reccommend if you need slim battery.

Good fits my ak 12 well and its powerfull and can hold some power lasts quite a while.

I recommend getting at least 2 products for longer games. For milsim i recommend getting more

La replica è molto ben fatta, se volete vedere la recensione completa in italiano al seguente link: https://youtu.be/9VzRXoFlI7w?si=t4MMrfW6k5xcDaYl
Tutto il resto nel dettaglio lo trovate nella recensione

this smg is a beast it has progamable mosfet a pretty good hop up (even tho its made from plastic and sadly it is propretary) the barrell is really good and its a dsg wich makes the gun shoots really fast like 27-30 bbps i would love to give this gun 5 star but there some things that really upsets me sometimes the gun just shutdown and from i have seen online its not a single case but practically everyone has this problem but its not like the gun stops working completely or something you just have to replug the battery but still its really bad if the gun shuts down midfight the second downsides is that the mag are really small in capacity and with that rate of fire it will take max 3 second to dump a fully loaded mag the final thing which isnt really that bad is that there isnt a sling attachments or at least i havent been to find it yet tho this gun is really good for the price and i think its worth it but i would wait for a revision or a recall or something so they fix the problem with the mosfets or if you want you can just get a different mosfet like a gate aster gate titan or a perun hybrid wich all of them will be an upgrade from the stock mosfet

I was tempted to buy a Gens Ace 1400 mA/25C but I bought 2 of this instead
for almost the same price. Seems to be a decent quality, well made and properly balanced. Fits very well under AK cover receiver. I can't say anything yet about reliability in time.

Out of the box you receive a sturdy Nylon Polymer PPK-20. Super solid replica no wobble at all until you get to the mag but, after you slap so duck tape in the magwell it all goes away. Extremely light replica very snappy trigger response no over heating issues with the battery or motor. Feeds every bb to perfection I’ve recommended this replica to 4 other buddies and they can’t wait to get there hands on it.

Polymer is good quality, doesn't wobble at all. Replica was shimmed pretty well from The box and only had to tighten the motor. Semi IS very snappy for a stock gun and rof is great. Overall I am very satisfied with my purchase.

Nice and torquey stock motor. Running it with a 9.9 LiFe and getting more RPS than I will ever need. The binary setting for the trigger is a monster - very useful. Feels solid, no creaking. Very solid stock. Great balance, too. Easily manoeuvre with one hand if needed even with a red dot attached. Sounds very smooth like it has a factory shim job. Amazing accuracy for such a small package.

One of the best battery in the market. Fit all my Arcturus and E&L AK, my Arcturus Ak12K has little space for the battery and it fits perfectly. I've used it for a whole day of gaming and it lasted the whole time. Of course, if you spray the BB like Rambo, you should have a spare battery with you. If you want a good battery at a good price, choose this one.

I needed a LIPO battery charger, I already have a NIMH battery, so I decided on the combined one. It was the best value for money.

The use of materials is not the best, the plastic cover feels a bit crappy.
The charging is not the fastest, the positive thing is that there is an LED indicator and it does not heat up.

In any case, NEVER leave it unattended while charging, and a LIPO GUARD charging bag is strongly recommended.

I have not yet been disappointed by the IPOWER brand.

Works great, fits the small battery compartment of the CM.103.

I used more ipower batteries in the past, and never had any problems with them. I easily recommend to anyone. Best value for proce ratio.

I bought this charger to charge a LI-PO battery. It's not the cheapest charger you can find on the TaiwanGun website, but I still chose to buy this not only for aesthetic reasons, but also because it allows me to charge batteries of another type. I was a little disappointed, because the buttons where we select the type of battery we want to charge sometimes get stuck. It's really annoying to have this kind of experience on a brand new product. Realizing perfectly that this type of thing can happen in any product, because nothing is infallible, it is always annoying for this to happen to us. Apart from this, nothing else to point out.

CHARGER IP3025 is a nice product, it's very easy to use, it's working with all type of batteries what we using for airsoft games, so it doesn't matter which type of batteries you are using this product can charge all types. With the led lights you can check that you battery is still charging or ready to use.
I missing only one thing from it, it can't make a "storing charge" for around 60% to store your battery without damaging it. But this is the only negative thing what I can tell with this product.

It does it job, not too expensive, it has good LED's but the reason i only gave it 3 stars is because when i charge it doesnt charge anything its just plugged it i can smell burning plastic and it makes a sound.. but while i charge i dont hear or smell anything so i guess it works

It's a very good and stable charger, does exactly what it's supposed to do. Not realy sure how fast and safe can it drain the battery but not realy needs to do that... since you probably going to drain it during the game of airsoft anyways.

Great for the value, if you on the budget and just starting off and need to buy lots of other things this is a perfrct choice. Down the way when you will have to charge multiple batterys ... you might wanna upgrade.

These bb's are INCREDIBLEY handy to have. They are way cheaper than traditional bb's that you buy and the nozzle that is attached to the bag is SOOO good. You can save a lot of bb's because the nozzle doesn't allow them to spill everywhere. 10/10 would recommend

If you are looking for an easy to use all-around charger, then this might be your best choice.
Easy to use and handle, understandable manual, you got a tamiya connector for conversion what is absolutely great.

The only reason of the 4 stars is because the fully charged indication and the standby indication are the same constant light, no color code, which can be confusing sometimes.

Great little charger!
I bought lipo/nmhi to charge two types of batteries. The type of accumulator can be easily selected with the buttons on it.
Compact size, everything is included in the package. Mini tamia-tamia converter and network cable. I recommend it to anyone looking for a good charger at a cheap price! Delivery was fast and accurate!

I believe it is overprized.
The power cable is bad and falls off with the slight movement.
Other than that it does the job, but I think that for this prize there should be similar ones with better cables.

It is a neat little charger and worth the price. I bought it because I wanted a balancing charger. It is not fast to charge or pretty, but it does the job and doesn't cost 100 euro. It makes a bit of a sound during charging, but I can only hear it when I sit next to it, so it doesn't bother me.
Just connect your battery, press the button underneath of your type of battery, press it once more and it starts charging. It is easy as that. It will stop blinking when the charging is done.

I bought this charger to charge my LiPo batteries, and it's been working great & charges them pretty quickly. After a long charging session, it does tend to get a little bit too warm for my personal preference.

Although I would recommend this charger for LiPo batteries, The included NiMH battery adapter almost fell apart when I took it out of the box. So if you buy this device with the intention to charge NiMH batteries, Get something else.

I bought it to charge LiPo batteries, it works perfectly.
It also charges NiMH batteries with the supplied adapter.
Its small size makes it easy to store and transport.
Excellent value for money charger, I recommend it to everyone.

It's a very sturdy & reliable charger. Dropped it twice & it didn't crack. It's charging speed is good enough & awesome size to fit in any bag without inconvenience. Best price for this on the market so far.

The charger is nice, but you can definitly see why is this cheap. It gets the job done, but overall feel of the charger is a bit cheap. The first fitting of the cables i tought i will break the charger but then it gets better. Compared to a price, you will not regret it, but its not perfect!

The IP3025 is a charger I recently bought for 3 of my LiPo batteries. It's very simple to use, beginner level battery charger for a really affordable price (actually I think it might be one of the cheapest on the market) .The charger comes with balancing connectors: 3 and 4 pins for charging LiPo / LiFePo with Tamiya Mini and Large Tamiya for charging NiMH batteries. It stops charging when the battery is FULL to not damage your batteries. The only thing I am missing from this charger is possibility to empty your LiPo battery for storage. You should never store your LiPo battery at full capacity since that isn't good for battery life. Store it at around ~60% full

I've even mesaured some charger specifications with multimeter:

Specifications:
Charge Current: 3A max
Circuit power: 25W

Charger is good. I like to have more options since i have a lipo batteries and nimh for older guns. Please take a note that LiPo battery should be connected only via the balancer connector (white cable coming out of your battery) and the NiMH battery through the adapter included in the set.

It works absolutely perfectly and reliably. I have a lot of batteries, there was no question of getting another one. I can only recommend it to everyone. It is easy to use and can handle both main battery types.

Great charger if you don't want to have a bunch for each type of battery, you can only charge one battery per time even though you can connect more, if you connect the battery to the wrong output the light will flash to warn you.

Perfect product for this price, if you are looking for a good value for a charger, this is what you need!
Easy to use ( 1 button per mode, simple system), can handle 3 types of batteries, comes with adapter to Tamya.
Nice and recommended.

It does fit my arcturus ak but with very little room left. Gives me enough juice to play all day. It lasts a full day of 8 hours with 1000 rounds shot mainly semy on 1.2j. The T plug fits snug and the battery doesn' swell that much. I would recommend

The iPower IP3025 LiPo/LiFe/NiMH battery charger from TaiwanGun is a versatile and efficient charging option. With a maximum output of 25W and 3A charging current, it can charge a variety of batteries quickly and safely. Its compact design and user-friendly interface make it easy to use, and the built-in safety features provide peace of mind. Overall, an excellent choice for any airsoft player looking for a reliable battery charger.

Nice and easy charger for entry level airsofter or even skilled one.

Pros:
can charge both Lipos and NiMh
comes with adapter for NiMh batteries
has nice orange design to find it
easy operation and clear manual
pretty LEDs
has been talking to me in sleep

Cons:
does not charge batteries for free

Fits good for Ak12pe.

Slow but perfect, great packaging and easy to use. I think charging NiMh is a really useful feature and including the adapter is a perfect add-on. So im pretty happy witch this charger. Maybe a bit too loud (just my feeling)

Mine was broken, it looks like one of the charging wires broke and wont charge. On the first try in my replica it shot like 3 auto bursts and then stopped. I know people with the same battery brand and they are happy, not my case

Again, a decent working product for the price. Better options outthere, but they are more exspensive.

You giys at taiwangun is doing a good job, but this 200 characters minimum is a pain. .. inn … the … butt

Fits in my Arcturus AT-AK04 nicely. Lasts a long time, i have 2 but have never needed to use a spare even in games lasting 4+ hours. Not much more to say, but need to fill the minimal character requirement.

It fits tightly under the cover of an Arcturus PP-19. It's a bit difficult until you bend your wires to make everything fit properly, but overall it's worth it since there's no way this battery will not last you an entire day at the field.

These airsoft BB's are extremely well made they are polished seamless and perfect. The performance is unparalleled. They were well packaged and shipped very quickly. Taiwan gun continues to impress me with their products. Make Taiwan gun your first decision when shopping for airsoft replicas gear and accessories they are the best in the business.

Small and easy charger that comes with adapters for the different batteries you would need to charge.

All that at a reasonable price.

Some people warned me about getting a mutli charger for my batteries but I have aboslute zero regrets buying this. Might not be the fastest charger there is but you would want that with lithium batteries anyway and its still fast enough. Just plan your charging!

Using this on my 7.4V LiPo battery.

Really good bbs for a low price. The bbs are made out of one pice so they won't break in your barrel. They come in a bag but you don't need to fill them in somewhere else because you can fill them easy out of the bag in your speedloder.

It fits under the dust cover of any rivetted VFC type AK (CM.045, BY-005, etc.) I've played 8-10 hour games with lots of full auto actions, but never had to use my spare battery. I have a strong M110 spring (380-390 fps) and a stock motor.