[Set] Lightweight russian AK gas tube cover - Black [5KU] + Tactical russian AK lower handguard long - Black [5KU] + 3-Slot Picatinny rail for russ...

RiS Pasuje do prawdziwego AKM, zero luzów, wystarczy przykręcić większe oparcie do Ris (jest w zestawie) obudowę pod komorą nabojową, delikatnie zeszlifowac narożniki i wchodzi idealnie. POLECAM

Stabilna konstrukcja bez luzów po zamontowaniu, bardzo lekka.

Brak.

Precisely what I was looking for, for an AKS-74U build. A perfect compliment to the lower handguard and gas tube cover, it's easy to build a handguard that will match the exact requirements of each individual user.

Precisely what I was looking for, for an AKS-74U build. Combined with the matching lower handguard and picatinny rail pieces of appropriate size, it's easy to build a handguard that will match the exact requirements of each individual user.

What arrived was exactly as described and what I ordered
It was shipped very quickly and arrived with no issues.
I am very happy with the purchase.

I am not sure what else I can say to fill up this panel.

Solid, Heavy, very heavy handguard but the quality and finish... the best, even LCT can't do it better.

Fitting requires some work but just go to original zenitco youtube channel for installation video and you will see - it have to be hammered in.
With airsoft replica I would sand it a little bit to fit or carefully use dremel and then hammer and then it sits super tight.

With E&L I had to use spacers on frontguard retainer (not included) to make it sit tight because it's shorter than original E&L Handguard.

If you don't mind the weight - that the best handguard for ak!

Unlike one of the other reviews, I was able to mount this on my E&L AKS74U. The existing wooden cover on the gas tube rotates(might need vice grips or similar), and is able to be taken off.

The cover itself is of great quality aluminium. It doesn't look to me like it'll break easily. I mounted this together with the B11 from 5KU (5KU-274-BK) and it fit together no problem.

Overall, if you are planning on buying the lower handguard, I'd recommend this one, even if it's purely for aesthetics.

*Tested on E&L AK-74M
I HIGHLY RECOMMEND THIS HANDGUARD
However, few things first. IF you are putting this handguard on E&L get ready for some serious dremel work.
The areas that need to be ground down are:
1. The small piece that goes inside of the recever needs witdh adjustment on the sides. Roughly 0.5mm in total on both sides to be hammered in properly.
2. The shroud of the handguard around the front tronion (rear sight block) is too thick and needs to be ground down slightly for handguard to be installed properly.
3. Slightly below the handguard shroud is a barrel shroud that isn't wide enough to to fit the barrel. Use a round grind weel to make a cut out for barrel to fit.

Besides that handguard is of good quality and I can recommend it for E&L essential series. As Long as you are willing to put in the work.

Bought it for my E&L ak105. Quite nice quality, feels a bit sharp on the edges, had some clips mounted on rail to protect my fingers. If u want to install this on a E&L ak105 prepare your heart for some work. My solution till this challenge and the three things has to made to be able to fit.
1: The small block(for the rear) that is included wont fit. Took some measurement and 3D printed a custom block for that cause.
2: The rear part of the handguard wont fit enitrely, solution = small surgery with dremel or if u have a circular file.
3: The front of handguard will have some space to fill, i used some stiff rubber.
The gas tube cover for this handguard need also some tiny cut with dremel, probably a file is enough. Tiny adjustment of the front of the gas tube is needed. It hits the front sight = unable to inline with the screws.
Now it sits as a mountain. It cost a small fortune but looks awesome! :D

Always check the rewiews guys before you buy, becouse I accitentally buy it for my cm.077c and it is shorter then it would be. but fits perfectly either with my zenitco.B-20 handguad aswell. Overall it is a great product, for that price is a ‘must-buy’.

Sleds made with great precision and excellent materials. Easy to assemble and, once fixed, they remain in their seat perfectly. Excellent price quality. 5ku always quality products. Congratulations to the Shop with quality products at great prices

The replica has a really nice quality, good paint, nice finish. I installed it on my cyma cm.040D, it had a wobble that I could reduce with some electrical tape, but it was a bit of a pain to get rid of that. I would like to see if someone could manage to fix that entirely.

Solid piece of kit. Fits well especially with 5ku Handguards. Good solid mounting for flashlights and flashlight switches. Gives it a more tactical look with the handguard.

Could've fit on my E&L AKs74u but didn't have the gas tube available. Had the potential to look good. One thing to note for E&L users, please purchase a gas tube if you can't take off the gas tube off the top wooden handguard

Fits perfectly with TACTICAL RUSSIAN AK LOWER HANDGUARD - BLACK ( 5KU-225 )

No modifications needed. screws are nice, not cheap screws that strips right of the bat. No need for loctite here on my AEG. Maybe i would loctite them if i had a GBBR.

Good product I orderd it for a ak47u it fits with some fileing of the front gastube handguard retainer .

Pros

Nice looks
Small profile
Replica zenitco
Gives rail space
Price!!

Cons
Russian
Not easy to fit on ak47u

PROS:

Very well made, high quality aluminium and nice markings.
Fits PERFECTLY on CM045C upper gas-tube
Light weight
Solid build, nice screws and bushings
Low profile
Good price compared to competitor products from same manufacturer.

CONS:
Rail is not spacious enough to fit every dot
If you choose to use 5KU-274-BK lower handguard, be prepared to adjust the coupling between the two

Totally recommended, take measures of your AK replica to ensure compatibility.

Good quality. I insert this to my LCT RPK-74 and it was a little challenge. It was possible when you have the rigth tools to modify. If your planning to insert this to LCT AK, you migth have to use dremel too.