CNC hop-up chamber - Sport/LED [MAXX MODEL]

The hop-up chamber by Maxx Model is the top on the airsoft market.

It was designed and made with attention to the smallest details.
Entirely made of aluminum on CNC machine, thanks to which it is light and very durable. It was equipped with three springs that push it against the gearbox to ensure the stability of each shot.
Also, the clip blocking the barrel in the chamber and the barrel centering ring inside the chamber ensure the barrel's stability and the greatest possible tightness.

The Rotary system is very sensitive, easy to operate, and has a very wide adjustment range. In combination with a set of replaceable pressure elements, allowing the use of various spacers and systems.
This model is equipped with 4 UV LED diodes, which illuminate the spheres very effectively. A power supply system has been used here that activates the diodes only when the trigger is pressed. As a result, the diodes do not light up immediately after connecting the battery.

Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Compatible with any V2 gear boxes with 11mm or 11.5mm bore

Does not fit MP5 models.
Remember that this is a tuning element and its assembly requires experience and manual skills. In some cases it will be necessary to adjust the mating components in order to mount or be able to fully use all the functions of the chamber.