HG-195B Green Gas Magazine [HFC]

Dieses Magazin macht einfach das wofür es gemacht wurde: befülle es mit BBs über die Öffnung unten indem Du die Feder ganz zurückziehst, oder, befülle es mit einem üblichen Befüller am Ausgang, und befülle den Gasbehälter mit Greengas. Ganz praktisch ist dass man sehen kann wieviele BBs drin stecken, also ob man noch weiter machen kann, oder nachladen, oder ein anderes volles Magazin bereithalten sollte. Vom Material her kann ich nur sagen dass dieses Magazin sehr solide ist. Eins habe ich schon mal versehentlich auf einen Betonfußboden fallen lassen. Außer einiger Kratzer war nichts passiert.

I have already purchased the respective replica of this magazine but as always the efficiency and speed in the exchange of magazines is more profitable I decided to acquire a second magazine so that it is not necessary to carry bbs in the middle of the fight.

This HG-195B magazine is dedicated to the HFC Desert Eagle and it works well in there. However, the HFC Deagle is an exact clone of the Tokyo Marui Deagle, so that this mag also fits well in the TM Deagle. As with any GBB mag, you will have to be prepared for arbitrary issues with the valves. So, buy yourself a valve key and a set of O-rings, if you didn't do that already. Open up the mag, remove the valves and clean the threads with a non-ragging cloth and silicon oil. Clean the O-rings, or replace them, and carefully reassemble the mag. Leaking issues should have vanished, if the seals have been properly mounted and the valves are undamaged. Valves can be bought as replacement parts, so be aware of that too. It's not rocket science, so take care of your gear and treat it with respect and attention. These HG-195B mags do not need to be any worse than more expensive ones. I have about 10 of them, and they are just fine. Leakages can occur, so don't discard an entire mag because of that. Remove the outlet valve and check it. Also check the main seal that sits between both parts of the body. The fill valve might leak, but in my experience, the output valve is a more likely culprit.

Not good quality , that plastic magazine lip is shit... It broke on my 2 magazines after a few uses... Never more this trash. I didnt find eshop where to buy spare parts for this magazine. If someone find eshop with this let me know.