15rd M1/M1A1 CO2 Magazine [King Arms]
Artikel nicht verfügbar
-
Lieferformen
Geben Sie Land und Postleitzahl ein, um die Versandkosten anzuzeigen
-
Technische Daten
-
Meinungen
Meinung hinzufügen-
- 23.12.2024 schrieb:Es war alles prima, der Versand war schnell, ich bestelle hier immer gerne.
Die Kontaktaufnahme ist auch sehr gut, wenn man Fragen hat, kommen die Antworten recht zügig.
Ich habe hier schon einiges bestellt und es hat bis jetzt immer gut geklappt.
Vielen Dank für den guten Service -
- 06.05.2024 schrieb:These magazines are very good construction,heavy and of course not cheap!they work very well without leaks and with good use they will last forever. .the upper part is from hard plastic,not metal like the ones that comes with the gun.i dont know if this make problems in the future..
-
- 31.08.2023 schrieb:A magazine with a few problems. I had to remove the feed lips from it and sand down the front edge of it because the bbs were sticking on it (not difficult to do, but this should not happend on so expencive magazine). Also, don't overtighten the cap/cover that holds the CO2 cartrage in the mag. You will flatten the seal around the punkture valve and you'll have to replace it (I plann on cutting it out of a thick rubber or maybe 3D print it). Also, it has a low capacity, but you can remove the spring guide and shorten it down and you can get up to 25 bbs into it.
-
- 08.12.2022 schrieb:The magazine is very expencive and heavy for what it is. However, its
very solid. It's also larger then a real M1 Carbine mag, so it will
not fit into a Carbine pouch. One problem I had was a misalignment of
the feed lips with the follower - so the bbs were sticking in the mag
(fileing needed)
The bb capacity is also limited, but you can get up to 23 bbs (google
the fix - it's an easy mod)
You can also upgrade the follower and get a "bolt stop" function in
the mag (so that it doesn't dryfire). Here is the model:
https://www.thingiverse.com/thing:4905339 -
- 28.04.2022 schrieb:I bought 2 of these magazines and they both work really well like the one I received with my M1 Carbine. The magazines take the CO2 in the bottom with a screw cap to secure them, and they hold about 14 bbs. With some personal modification, you can cut the guiding rod to the base of its platform and be able to put 21-23 bbs in almost doubling your capacity per load.
-
A spare magazine dedicated to King Arms M1A1 Co2 Rifle.
It has a durable construction and is suitable for 6mm bb.
Can be powered by a 12g CO2 cartridge.
It has a durable construction and is suitable for 6mm bb.
Can be powered by a 12g CO2 cartridge.
Sicherheits- und Verwendungsrichtlinien
Bitte lesen Sie die folgenden Informationen für eine sichere Verwendung des Produkts:SKU: KA-MAG-65 · EAN: 5901698494834 · 15rd M1/M1A1 CO2 Magazine [King Arms] ·
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Meldung eines Sicherheitsproblems · Verantwortliche Person und Hersteller
Verantwortliche Person und Hersteller 

Für das Inverkehrbringen des Produkts in der EU verantwortliche Person:
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · [email protected]
KRAKMAN P. Kiepura, K. Michalik sp.k. · Pollanki 18, 30-740 Krakow, Polen · [email protected]
Hersteller:
REPLIKAS, DIE AUF TAIWANGUN.COM VERFÜGBAR SIND, DÜRFEN NUR VON VOLLJÄHRIGEN GEKAUFT WERDEN. SIE SIND NUR FÜR ASG- UND TAKTISCHE SPIELE BESTIMMT
Fragen? Wir helfen Ihnen gerne weiter. Senden Sie uns eine E-Mail an [email protected]
* Die Preise enthalten die gesetzliche Mehrwertsteuer ohne Versandkosten
