JG0451 [J.G.Works]
Promocja
Nasza cena*:
$62.68
Cena bezpośrednio przed obniżką: $78.35
-
Formy dostawy
Wprowadź kraj i kod pocztowy, aby wyświetlić koszty dostawy
-
Dane techniczne
Waga 1135 g Kolor czarny Materiał aluminium, stal Rodzaj ognia ciągły, pojedynczy Rodzaj magazynka hi-cap Akumulator w zestawie NIE Rodzaj łożysk polikarbonowe ślizgowe Okres gwarancji 12 miesięcy EAN 5901698421151 Amunicja .12g, .20g, .23g Numer seryjny TAK Długość mm 520 Pojemność magazynka kulek 80 Długość lufy wewnętrznej mm 125 Energia wylotowa pocisku J 0,63 Prędkość wylotowa pocisku fps 260 FPS z kulkami 0.20g Średnica lufy wewnętrznej mm 6,08 Model Repliki Replika Airsoft SKORPION Producent: J.G. WORKS Kod: 0451 -
Recenzje
Dodaj opinię-
-
18.03.2025
napisał:
It's really cool gun and it's doesn't spend much money. I think it's good choice to start new hobby, but there's not special. Just good!
JG0452 to replika pistoletu maszynowego MAC-10, produkowana przez firmę Jing Gong (JG), cenioną w świecie airsoftu za wysoką jakość i dbałość o szczegóły.
Cechy charakterystyczne:
Konstrukcja: Korpus wykonany z wytrzymałego tworzywa ABS; składana kolba, lufa, uchwyt zawieszenia i magazynek są metalowe.
Tryby ognia: Możliwość prowadzenia ognia pojedynczego i ciągłego.
Hop-Up: Regulowany system Hop-Up, dostępny po otwarciu pokrywy zamka.
Magazynek: Wysokokapacitetowy magazynek typu Hi-Cap na 450 kulek.
Tłumik: W zestawie znajduje się charakterystyczny tłumik dźwięku.
Zawartość zestawu:
Replika pistoletu maszynowego z tłumikiem
Metalowy magazynek Hi-Cap
Bateria 7,2V 500 mAh
Ładowarka
-
-
07.12.2024
napisał:
Świetna replika, dosyć celna jak na taki sprzęt, za tę cenę naprawdę warto. Waga bardzo realistyczna, prawie całą wykonana z metalu. Sprawia wrażenie porządnie zrobionej, więc nie powinna szybko się zepsuć
-
-
12.12.2023
napisał:
ogólnie replika jest ok ale Fakt że by to jakkolwiek sensownie chodziło trzeba dokonać przeróbek (zmiana wtyku na ticonekt i wrzucenie mosfetu) strzela marnie a tym bardziej na magazynku dostępnym w zestawie polecam zaopatrzyć się w mid capy od ASG bądź drumy wella
-
-
18.09.2022
napisał:
Jak na aep-a strzela na prawdę świetnie, ma dobrą celność i szybkostrzelność, łatwo nastawić hop-up. wykonana w większości z metalu jest ciężka ale zarazem bardzo poręczna. Idealna do rozgrywek wewnątrz lub jako boczniak dla snajpera.
-
-
27.01.2022
napisał:
Ulubiony p m mojego wnuka, już od kilku lat sypie kulkami i trafia w zaplanowane cele, działa do tej pory bez zarzutu, sam przestrzelałem go wielokrotnie, przytula się do ramienia jak kot, strzelanie w różnych sytuacjach świetnie nakręca do dalszej gry. Lekki i poręczny, dobre dziecko czeskich rusznikarzy, polecam
-
-
16.12.2021
napisał:
Stosunkowo słaba mocowo replika, idealna na CQB, bez ryzyka zrobienia krzywdy. Pewną wadą jest magazynek "hicap" o małej pojemności - mid był by chyba lepszy. Kolba jak to w skorpionie mało ergonomiczna, ale to wada pierwowzoru. Plusem jest przejściówka na tłumik. Brakuje tylko baterii LiPol do niego. Ogólnie przyjemna zabawka za przyjemną cenę.
-
-
05.06.2020
napisał:
Réplique et chargeur, je vous recommande de prendre un chargeur camembert (300 billes) avec.Zalety:Petit, possibilité de la mettre dans un holster si vous enlevez la crosse, possibilité de monter un silencieux classique, parfaite en CQBWady:La crosse n'est pas assé penchée vers le bas vous ne pourrez pas l'épauler et regarder dans la mire en même temps.
La pièce qui tient la batterie dans la poignée est très fragile et se perd facilement (mettez un scotch noir dès le début) -
-
10.12.2025
napisał:
It’s a really good replica for a low price, the lower body is made of metal and the top is made out of high quality plastic that feels like plastic. The only bad part about this replica is that the battery is quite weak so if you want more power you would have to buy a stronger one.
-
-
03.09.2025
napisał:
Its a fine airsoft replica, lacks range and accuracy (as to be expected with a sidearm), but functions fine enough. The only real downside is the magazines, the 80 rnd highcaps are not great. Filling them is messy, and even after winding them they will shoot maybe 10 shots before you have to wind it again. Quite annoying when using it at full auto
-
-
14.08.2025
napisał:
This AEP has solid build quality, fire rate, accuracy and has some of the best packaging of any Airsoft gun I've owned.
In the box it includes, bottom rails, a threaded barrel, a battery, charger, paper targets and one of the better Airsoft manuals.
I would 100% recommend purchasing this if you're in need of more firepower where traditional pistols may fall short especially if you lack full auto capabilities on your primary for example a sniper.
For the price it is absolutely worth getting. -
-
14.07.2025
napisał:
I had a few AEP's already. I sold them all in the end, not satisfied with performance.
So when my son wanted this one, at first i was against it. In the end i gave in and... was quite suprised.
Positives:
well made, accurate and BB's fly a great distance
Has adapter, so you can put silencer/tracer on it.
Negatives:
The magazine. Hi-cap is really badly made. It won't feed the last 15 BB's. And you need to wind it all the time as that also feeds only about 15 BB.
Other:
Cronoed.. and it does provide about 0.5-0.6J
Can lift 0.28g
ROF of 10/s
You can get 3D printed mid-cap magazines with capacity of about 60. Will try them soon.
-
-
31.03.2025
napisał:
This is my first automatic airsoft gun. It means I'm a beginner, so read the following from this point of view.
Despite the short barrel, the accuracy is fair. The reload with the cogwheel is OK, although to fill up the magazine is a bit unconfortable, but I think this is absolutely normal.
The quality of the manufacturing is superb, I like the outlook, the weight and the accuracy of the metal parts too.
Frankly, I cannot write any drawback.
I am absolutely satisfied, thanks guys! -
-
11.12.2024
napisał:
I am surprised and very pleased with this replica, the build is sturdy and the only wobble is in the stock, i was not expecting such a good replica for this price.
I suggest to get a tokyo marui adapter for the battery so it can mount li-po micro AEP batteries instead of regular AEP batteries, it makes the replica a lot snappier.
The silencer mount is also adorable and works with regular suppressors or muzzlebreaks used in g&g and arcturus replicas for example. -
-
27.12.2022
napisał:
Fantastic little sub-machine gun
Relay nice that you get a barell extension and a small plastic pic rail.
Good backup weapon and especially good gor cold days when gass is unpredictable.
Folding stock gives a great shooting position but wish there were mid cap magazines and this this would be an ideal sniper side arm -
-
18.09.2022
napisał:
This thing is amazing. Chrono shows 255 fps and tuned hopup slings plastic past 100 feet easy. This is way more accurate and powerful than the well r4 mp7. I already put a short silencer on it and it looks amazing. The magazine feeds well and I got some midcaps from airsoftgi and they feed good too. I plan to put a laylax bucking and lambda inner barrel to squeeze out a bit more performance. First time ordering from this site and I am extremely pleased and grateful for the prices and ease of international shipping. Highly recommended
-
-
11.04.2022
napisał:
The gun made from full metal. Great weight.
Negatives: noisy mid(high)cap magazine
useless folding stock
Positives : dummy silencer adapter
screwable mounting rail
I bought this replika for secondary weapon. I am quite satisfied .
Hungarian own video:
https://youtu.be/vUrzyLuLbjE -
-
27.01.2022
napisał:
I think it is a great replica. The material and the overall gun feels great and solid. Compared to its size it shoots pretty accurately and strongly. My only problem with it is the battery charger. It is not the best quality, and I am a little scared that it could ruin the battery itself.
-
-
19.01.2022
napisał:
I bought this as my first airsoft replica to start playing airsoft and Im not disappointed in it. Its fully made out of metal, very durable feels nice in my hand. The magazine feeds well, and the gun has a pretty good range, about 30-35m. You also get a battery and a charger in the set. Totally worth it.
-
-
26.04.2021
napisał:
I really love this gun so may ask why the 3 stars it comes to the magazines issues i have. The gun itself is well made, shoots very well for AEP gun, great for indoor fights.Zalety:+ Small compactWady:
+ Packs a punch
+ wel made- Magazines
They hold 10-15 rounds max and they are not consistent in feeding. I have tried everything with them in the end i had to 3D print my own magazines for this gun witch are MID cap and hold up to 60 bbs. So thanks to lacking of different manufactures for magazines i gave this gun only 3 stars. Otherwise it would be 5*
-
-
18.03.2025
napisał:
-
Zapytaj o produkt
Repliki Budżetowe: Styl i Jakość w Atrakcyjnej Cenie — sprawdź inne produkty z serii
Kolejna wersja repliki popularnego pistoletu maszynowego jakim jest vz.61, tym razem wyprodukowany przez znanego chińskiego producenta WORKS J.G.. Bardzo solidnie wykonana replika posiada w swoim wnętrzu specjalnie skonstruowany dla tego modelu mechanizm, który pozwala na rozpędzenie wystrzelonej kulki do 260 stóp na sekundę. Parametry repliki czynią z niej idealny pistolet maszynowy do prowadzenia bezpiecznej gry w zamkniętych pomieszczeniach. Elementy takie jak kolba, osłona spustu oraz piny zostały wykonane ze stali, natomiast dolna część korpusu, lufa zewnętrzna język spustowy, rączka przeładowania, przyrządy celownicze to wysokiej jakości aluminium. Chwyt pistoletowy oraz pokrywa zamka zostały zrobione z ABS-u.
UWAGA! Replika posiada unikalny numer seryjny!
Każdy AEG przechodzi przegląd zerowy. Jest sprawdzany i przestrzeliwany na chronometrze firmy XCORTECH X3200.
UWAGA! Replika posiada unikalny numer seryjny!
Zestaw zawiera:
- replikę JG0451
- magazynek na 80 kulek
Każdy AEG przechodzi przegląd zerowy. Jest sprawdzany i przestrzeliwany na chronometrze firmy XCORTECH X3200.
Bezpieczne i świadome użycie
Zapoznaj się z poniższymi informacjami, aby zadbać o bezpieczne użycie produktu.SKU: 0451 · EAN: 5901698421151 · JG0451 [J.G.Works] ·
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Zgłoś problem z bezpieczeństwa · Osoba odpowiedzialna i producent
Osoba odpowiedzialna i producent 

Osoba odpowiedzialna za wprowadzenie produktu na teren UE:
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · shop@taiwangun.com
KRAKMAN P. Kiepura, K. Michalik sp.k. · ul. Półłanki 18, 30-740 Kraków, Polska · shop@taiwangun.com
Producent:
REPLIKI DOSTĘPNE NA STRONIE TAIWANGUN.COM MOGĄ BYĆ NABYWANE WYŁĄCZNIE PRZEZ OSOBY PEŁNOLETNIE. PRODUKTY PRZEZNACZONE WYŁĄCZNIE DO ASG I GIER TAKTYCZNYCH
Pytania lub niejasności? Zadzwoń +48 123626134 lub napisz na e-mail shop@taiwangun.com
* Ceny z podatkiem VAT, bez kosztów transportu
